Tsugami Swiss Cnc Lathe Programming Zip

Download File ––– https://jinyurl.com/2txmgD

How to Program a Tsugami Swiss CNC Lathe with Abile Software

If you are looking for a way to program a Tsugami Swiss CNC lathe with ease and efficiency, you might want to consider using Abile programming software. Abile is a software tool that is included at no cost with the purchase of a Tsugami machine. It allows you to create and edit programs for your Tsugami Swiss CNC lathe using a graphical user interface and a simple drag-and-drop method.

Abile programming software has many advantages over conventional programming methods. Some of them are:

It reduces programming time and errors by eliminating the need to write code manually.
It simplifies complex operations by providing predefined cycles and macros.
It optimizes cutting conditions by automatically calculating feeds and speeds based on material and tool data.
It enhances productivity by enabling simultaneous machining on the main and sub spindle.
It supports multiple file formats, such as DXF, STEP, IGES, and ZIP.

To program a Tsugami Swiss CNC lathe with Abile software, you need to follow these steps:

Create a new project and select your machine model and configuration.
Import or draw your part geometry using the CAD module.
Define your workpiece dimensions and material properties.
Select your tools and holders from the library or create your own.
Assign machining operations to your tools using the CAM module.
Edit and simulate your program using the NC editor and simulator.
Transfer your program to your machine using the DNC module or a USB drive.

Abile programming software is a powerful and user-friendly tool that can help you program your Tsugami Swiss CNC lathe with ease and efficiency. It can also help you estimate project costs, monitor machine status, and troubleshoot errors. To learn more about Abile programming software, you can watch this video[^2^] or visit this website[^1^].

In this section, we will show you an example of how to program a Tsugami SS20 Swiss CNC lathe with Abile software. The SS20 is a 20 mm opposed gang tool CNC lathe that features a unique modular tool zone and chucker convertibility. It can perform deep cuts and simultaneous machining on the main and sub spindle, making it ideal for complex small parts. You can learn more about the SS20 here.

The part we want to make is a hexagonal bolt with a threaded hole on one end and a chamfered head on the other. The part dimensions are shown in the figure below.

The steps to program this part with Abile software are as follows:

Create a new project and select the SS20 machine model and configuration. You can choose between guide bushing mode or chucker mode depending on your stock type and accuracy requirements.
Import the bolt geometry from a DXF file or draw it using the CAD module. You can use the snap and grid functions to create precise shapes and dimensions.
Define the workpiece dimensions and material properties. In this case, we will use 20 mm brass bar stock with a length of 50 mm.
Select the tools and holders from the library or create your own. For this part, we will use the following tools:
- A 3 mm center drill on the main spindle for drilling the hole.
- A 4 mm tap on the main spindle for threading the hole.
- A 10 mm turning tool on the main spindle for turning the shank.
- A 10 mm hexagonal broach on the main spindle for forming the head.
- A 3 mm chamfering tool on the sub spindle for chamfering the head.
- A 10 mm parting tool on the sub spindle for cutting off the part.
Assign machining operations to your tools using the CAM module. You can drag and drop predefined cycles and macros from the menu or create your own. You can also adjust the cutting parameters, such as feed rate, spindle speed, depth of cut, etc. For this part, we will use the following operations:
- A drilling cycle on the main spindle to drill a 3 mm hole with a depth of 15 mm.
- A tapping cycle on the main spindle to thread the hole with a pitch of 0.7 mm.
- A turning cycle on the main spindle to turn the shank with a diameter of 10 mm and a length of 25 mm.
- A broaching cycle on the main spindle to form the hexagonal head with a width of 14 mm and a height of 5 mm.
- A transfer cycle to move the part from the main spindle to the sub spindle.
- A chamfering cycle on the sub spindle to chamfer the head with an angle of 45 degrees and a width of 1 mm.
- A parting cycle on the sub spindle to cut off the part with a clearance of 0.5 mm.
Edit and simulate your program using the NC editor and simulator. You can check your program for syntax errors, modify code lines, insert comments, etc. You can also simulate your program in 2D or 3D mode, view tool paths, measure distances, check collisions, etc.
Transfer your program to your machine using the DNC module or a USB drive. You can also monitor your machine status, such as position, speed, load, etc., and troubleshoot errors using Abile software.

By following these steps, you can program your Tsugami SS20 Swiss CNC lathe with Abile software in a matter of minutes. Abile software is designed to make programming easy and efficient for any level of user. Whether you are making simple or complex parts, Abile software can help you achieve optimal results with your Tsugami Swiss CNC lathe.

1b8d091108