Datasets:
text
stringlengths 25
277
| label
class label 6
classes |
|---|---|
The air filter was dirty and the fan was producing a loud humming noise due to worn bearings. | 4broken fan
|
All components of the system were functioning within expected parameters, with minor fluctuations in air flow on the second floor. | 0everything ok
|
Checked thermostat settings, all set to manufacturer's defaults. | 0everything ok
|
checked thermostat and replaced faulty heating element, unit now operational | 5broken thermostat
|
The entire system is malfunctioning due to the faulty compressor's failure to circulate refrigerant properly, causing inconsistent temperatures throughout the building. | 1damaged
|
Adjusted thermostat calibration for optimal performance. | 0everything ok
|
Checked thermostat calibration and found it was slightly off, adjusted accordingly. | 5broken thermostat
|
Thermostat setpoint temperature is off by 5 degrees, which is causing the system to malfunction. All other readings are within normal parameters. | 5broken thermostat
|
coil temperature is higher than usual, but no issues were found with the fan motor | 1damaged
|
checked thermostat settings, clogged air filter cleaned, and thermostat calibrated. | 0everything ok
|
The air conditioning unit's compressor is malfunctioning and making loud noises. | 4broken fan
|
replaced worn out belt on compressor | 3other
|
replaced a faulty capacitor on the air conditioner unit | 3other
|
replaced a faulty thermostat in the server room, also tightened all loose connections | 5broken thermostat
|
The central AC unit is functioning normally, temperature fluctuations are within the acceptable range, and all components are securely fastened. | 0everything ok
|
The unit has a slight refrigerant leak, but the system is still running. | 1damaged
|
coil dirty, re-cleaned and secured properly, fan motor bearings lubricated, thermostat set to 72 degrees. | 0everything ok
|
The sensor indicates a slight discrepancy in the temperature reading, but the equipment is still functioning, just not optimally. | 1damaged
|
Adjusted thermostat settings to meet manufacturer specifications and replaced faulty sensor. | 5broken thermostat
|
replaced a faulty thermostat with a new one, checked refrigerant levels | 5broken thermostat
|
replaced faulty thermostat with new one, thermostat is now working | 5broken thermostat
|
Thermostat at 234 Main St is reading 72 degrees with a humidity level of 40%, system seems to be running smoothly. | 0everything ok
|
replaced fan coil unit, cleaned air filter, and adjusted refrigerant levels | 0everything ok
|
replaced thermostat to prevent overheating | 5broken thermostat
|
The lamp in the living room is not lighting up and it's showing an error message saying'replace bulb' | 2broken lamp
|
replaced thermostat and o-rings and cleaned filter and replaced filter. | 0everything ok
|
checked condenser coils, vacuumed filter, and ensured proper thermostat settings. | 0everything ok
|
Thermostat not reading temperature correctly due to faulty wiring. Needs to be replaced. | 5broken thermostat
|
adjusted thermostat settings and cleaned the air filter | 0everything ok
|
The refrigerant levels in the air conditioning unit are low and need to be refilled to ensure proper cooling. | 3other
|
No issues found during the inspection of the heating system, but the technician noticed that the air filter needs to be cleaned in the next maintenance visit. | 0everything ok
|
checked the compressor and found that the temperature differential is slightly higher than expected, will make adjustments to balance the system | 1damaged
|
Temperature sensor reading 72.5F, pressure gauge shows 14.7 psi, no signs of leaks or unusual noises. | 0everything ok
|
System's cooling coil was leaking refrigerant and had to be recharged. | 1damaged
|
The condenser coil has high levels of debris and dust accumulation, and the fan is not spinning freely. | 1damaged
|
replaced faulty capacitor | 3other
|
replaced faulty compressor and tightened loose screws on the outdoor unit | 3other
|
System has been calibrated to maintain optimal temperature levels, ensuring consistent heating and cooling performance. | 0everything ok
|
Temperature readings are within acceptable range but evaporator coils are slightly dirty and need cleaning to improve airflow. | 3other
|
replaced faulty thermostat with new one, cleaned air filter, checked refrigerant levels and everything ok | 0everything ok
|
replaced a faulty thermostat in the main unit, now working properly | 5broken thermostat
|
Thermostat has been replaced due to faulty temperature readings and is now functioning within expected parameters. | 0everything ok
|
Installation check revealed worn-out contactor and faulty electrical connections causing inconsistent compressor operation, necessitating repair. | 1damaged
|
Cleaned and replaced the worn-out air filter. Checked the thermostat's temperature setting and adjusted it according to the client's requirements. | 0everything ok
|
replaced a burnt-out thermostat | 5broken thermostat
|
replaced a faulty compressor with a new one on the air conditioner. | 3other
|
thermostat is not regulating temperature correctly, replaced faulty sensor | 5broken thermostat
|
all heaters are functioning within normal parameters, thermostat readings are accurate, and air filters are clean | 0everything ok
|
The condenser coil is dirty and needs to be cleaned, which could be causing the air conditioner to run inefficiently. | 3other
|
Replaced worn-out filters in a commercial air conditioning system. Cleaned condenser coils and tightened loose connections. System is now functioning within normal parameters. | 0everything ok
|
Replaced faulty pressure gauge. Everything else is working fine. | 0everything ok
|
The thermostat in the living room is not functioning correctly, the temperature is 2 degrees above the set point. | 5broken thermostat
|
Thermostat was reading 72 degrees, but the temperature reading was fluctuating by 5 degrees every 10 minutes | 1damaged
|
found faulty thermostat and replaced it | 5broken thermostat
|
The air filter is clogged, which may affect the system's airflow. Needs cleaning. | 3other
|
replaced a worn-out filter | 3other
|
Thermostat not responding to temperature changes; recalibrated unit to correct settings | 5broken thermostat
|
cleared dust from air filters | 0everything ok
|
Temperature readings are within the expected range for the current season, and the compressor is not showing any signs of excessive wear. | 0everything ok
|
Adjusted temperature control on AC unit, cleaned air filter, and tightened loose screws on exhaust fan. | 0everything ok
|
Discovered a loose wire on the compressor and tightened it. Everything else is within normal parameters. | 0everything ok
|
replaced worn-out thermostat sensor | 5broken thermostat
|
replaced a faulty thermostat in the east wing | 5broken thermostat
|
Faulty thermostats were removed and replaced due to excessive wear and tear, and air filters were cleaned to prevent dust buildup. | 5broken thermostat
|
System is functioning within normal temperature parameters and the compressor is not excessively loud. | 0everything ok
|
Air handler unit fan is spinning at 600 rpm, which is below the recommended 800 rpm, but system is maintaining a comfortable temperature. | 0everything ok
|
The thermostat was working fine, but the air filter needed to be replaced. | 0everything ok
|
Replaced old thermostat with a new one, also tightened loose electrical connections. | 0everything ok
|
Thermostat temperature difference between floor and roof units is 4 degrees, will need to adjust the differential | 3other
|
Found malfunctioning humidistat. Replaced faulty sensor and adjusted temperature reading to match manufacturer's specs. | 5broken thermostat
|
Equipment check-up revealed a faulty temperature sensor on the outdoor unit, requires immediate replacement. | 5broken thermostat
|
The temperature control unit is calibrated correctly and the airflow is functioning within normal parameters. | 0everything ok
|
replaced worn-out thermostat and tightened loose electrical connections | 5broken thermostat
|
Thermostat malfunctioned due to faulty wiring. Replaced and reprogrammed for correct temperature settings. | 5broken thermostat
|
thermostat not regulating temperature properly, replaced faulty sensor | 5broken thermostat
|
Found a thermostat not working correctly, replaced the battery to solve the issue. | 5broken thermostat
|
Lamp not lit when turned on, replaced bulb, now working fine. | 2broken lamp
|
The pressure gauge on the condenser coil is reading 20 PSI, which is above the acceptable range. Replaced the faulty gauge with a new one. | 5broken thermostat
|
Replaced a clogged filter on the air handler unit. | 3other
|
checked thermostat and fixed a loose electrical connection | 0everything ok
|
Thermostat is set to 72 degrees and the system is cooling the house properly with no issues. | 0everything ok
|
Found worn-out belt on condenser, replaced it with a new one. | 4broken fan
|
Found a faulty expansion valve, recommended replacement to avoid system malfunction. | 1damaged
|
Replaced faulty thermostat with a new one. | 5broken thermostat
|
thermostat not displaying temperature | 5broken thermostat
|
Thermostat not registering temperature changes correctly, recalibration required. | 5broken thermostat
|
The temperature reading on the indoor unit is at 72 degrees, which is slightly above the setpoint of 70 degrees. Made some minor adjustments to the air flow to balance the system. | 0everything ok
|
all equipment checked, filters cleaned and replaced, thermostat calibrated | 0everything ok
|
Found the air handler in the basement, unit is not blowing air and the drain pan is full of water. | 4broken fan
|
HVAC system is functioning properly, all valves are open, but the compressor is slightly underperforming due to worn-out bearings | 1damaged
|
The system's air filter is clogged and needs to be replaced to ensure proper airflow | 3other
|
Temperature discrepancies were observed during the inspection of the air conditioning unit. Pressure readings indicated a slight deviation from optimal levels, which may be due to worn seals or refrigerant leakage. Further investigation is required to determine the root cause. | 1damaged
|
The high-pressure relief valve on the air compressor was found to be malfunctioning and needed to be replaced. | 5broken thermostat
|
Air filter was clogged, cleaned and reinstalled. Equipment functioning at 72% capacity. | 3other
|
The new heat pump is operating efficiently and maintaining a consistent temperature within the designated parameters. | 0everything ok
|
thermostat not functioning as expected, replaced faulty component | 5broken thermostat
|
replaced a faulty relay switch due to malfunctioning, reset the temperature display and checked for proper gas flow | 3other
|
replaced faulty wiring to rectify issue with temperature control unit, re-checked coolant levels, and tightened loose connections | 0everything ok
|
Replaced worn-out compressor belt and lubricated all moving parts on the outdoor unit to prevent premature wear. | 0everything ok
|
All temperature readings within acceptable limits, no signs of overheating or excessive wear and tear observed. | 0everything ok
|
Dataset Card for my-distiset-0154310c
This dataset has been created with distilabel.
Dataset Summary
This dataset contains a pipeline.yaml which can be used to reproduce the pipeline that generated it in distilabel using the distilabel CLI:
distilabel pipeline run --config "https://huggingface.co/datasets/rikbw-hs/my-distiset-0154310c/raw/main/pipeline.yaml"
or explore the configuration:
distilabel pipeline info --config "https://huggingface.co/datasets/rikbw-hs/my-distiset-0154310c/raw/main/pipeline.yaml"
Dataset structure
The examples have the following structure per configuration:
Configuration: default
{
"label": 4,
"text": "The air filter was dirty and the fan was producing a loud humming noise due to worn bearings."
}
This subset can be loaded as:
from datasets import load_dataset
ds = load_dataset("rikbw-hs/my-distiset-0154310c", "default")
Or simply as it follows, since there's only one configuration and is named default:
from datasets import load_dataset
ds = load_dataset("rikbw-hs/my-distiset-0154310c")
- Downloads last month
- 35