Dataset Viewer
text
stringlengths 87
16.4k
|
|---|
<s>[INST] Generate LEGO instructions for building a 319-piece Speed Champions set inspired by the Nissan Skyline GT-R (R34) from the 2 Fast 2 Furious movie. The set includes authentic details like iconic livery, a rear wing, grille, wheel arches, and a nitro fuel canister, along with a Brian O'Conner minifigure for role play. The model measures over 2 in. (5 cm) high, 6.5 in. (16 cm) long, and 2.5 in. (7 cm) wide. Box features a black design with a silver coupe driving through a city, Brian O'Conner minifigure, and Fast & Furious branding. [/INST] Concise LEGO Building Instructions:
**Building Brian O'Conner Minifigure:**
- Attach torso to legs, head to torso, and hair on top.
- Brian wears gray pants, white tee shirt with grease stains, short blond hair, and stubble.
**Main Build:**
1. Place black 6x12 vehicle base horizontally.
2. Add blue 1x2 jumper plate to back right studs.
3. Add dark gray 1x2 plates in front, building up.
**Continued Steps:**
4. Flip car, add black 2x6 plates.
5. Place light gray 1x1 plates and blue jumper plates.
6. Add blue 2x4 plate and black 1x1 thick plates.
7. Place light gray 1x1 plates and 2x2 tiles.
8. Add black 2x3 plates under front anti-studs.
**Further Steps:**
9. Add yellow 1x4 plate and black 1x1 thick plates.
10. Place light gray 2x2 corner plates and blue slope tiles.
11. Add dark gray 2x6 plate with axle holes and axles.
12. Place transparent blue plates and rear engine pieces.
**Continuing Assembly:**
13. Add light gray 1x2 brick with pin hole.
14. Place light gray 2x2 corner plates, brown round plates.
15. Add yellow 1x4 plate and blue jumper plate.
**Building the Bumper:**
20. Set chassis aside, build bumper with plates and bricks.
26. Add tiles and plates to rear assembly.
28. Place metallic gray circular plate for exhaust pipe.
31. Create exhaust pipe with metallic gray liftarm.
**Final Assembly:**
32. Attach bumper to chassis.
34. Add blue 1x3 plate to chassis.
37. Place red plates and jumper plate.
39. Attach minifigure neck brackets and tiles.
41. Build large tail lights and attach to car.
**Finishing Touches:**
42. Place corner tiles with stickers on front of car.
43. Repeat tail light assembly on the rear of the car.
45.1. Add blue plate and curved slope.
45.2. Place transparent blue plate on mudguard. 1. Attach a black 1x1 plate to the front and rear mudguards.
2. Place a black 2x6 plate vertically centered on the right side of the car.
3. Add transparent blue 1x1 plates to the left and back sides of the car.
4. Place light gray 1x1 plates on the front and back mudguard studs.
5. Attach a black 1x1 tile to a light gray 1x1 headlight brick twice.
6. Position these assemblies symmetrically on the front and back sides.
7. Add tall dark gray 1x1x2 bricks to the front and back sides of the car.
8. Place transparent blue 1x2 plates on the left columns of the car.
9. Attach black 1x2 plates with hanging studs to the front and back pieces.
10. Position a transparent blue 1x2 plate across the previous pieces.
11. Add black 1x1 studs to the front and back of the car.
12. Attach blue 1x1 plates and light gray 1x1 tiles to the car's front and back.
13. Place light gray 1x3 and 2x2 tiles on the car's rightmost column and in front of it.
14. Add slope tiles to the front and back rows of the car, repeating the pattern.
15. Place light gray tiles with stickers on the car's front and back rows.
16. Attach a headlight brick to the front and back rows.
17. Place a plate with side studs between the headlight bricks.
18. Add tiles with stickers and a corner brick to the front and back rows.
19. Place plates, plates with studs, and corner tiles in a specific order.
20. Construct the NOS bottles, center console, valve handles, and shifter.
21. Attach the NOS/Seat assembly to the car's side studs.
22. Add the last NOS bottle to the car's side stud.
23. Attach the shifter and pressure gauge tiles to the car.
24. Position headlight bricks, plates, and a corner brick on the front.
25. Attach a slope tile with a sticker to each piece.
26. Build and attach the doors with mirrors to the car.
27. Construct and attach the wheel wells with headlights. 1. Place light gray 2x2 corner plate in J orientation on side studs.
2. Attach transparent gray 1x1 slope tile with thick side on right to top left side stud of wheel well assembly.
3. Add another slope tile in same orientation to right of the first.
4. Rotate wheel well assembly, attach to back row of car with right side touching left side of door.
5. Place light gray 1x2 brick with side studs at front in front of you.
6. Add light gray 1x4 tile overhanging two studs to left on side studs of previous piece.
7. Attach this assembly to right of back wheel well.
8. Repeat steps 5-7 for front wheel well.
9. Attach yellow 1x2 plate with 1L bar on left to specific studs near wheel wells.
10. Add blue 1x2 jumper plates to these pieces.
11. Place light gray 1x3 jumper plate between previous pieces.
12. Add light gray 2x2 triangular tiles to sides of back wheel well.
13. Assemble body under headlights using light gray plates and black plates.
14. Place blue 1x3 plate for front of car, add black 1x2 blasters with yellow bar connectors.
15. Attach wall panels and “GT R” pattern plate for radiator.
16. Add pentagonal tiles to sides of assembly.
17. Attach radiator to 1L bars on car.
18. Create hood using light gray pieces and curved slope tiles.
19. Attach hood to left side of car.
20. Build rear wing using black and blue plates, attach to right side of car.
21. Construct rear window using windshield and light gray tiles.
22. Attach rear windshield to left of wing.
23. Add more tiles to rear windshield.
24. Place transparent gray windshield and light gray tiles for rear window.
25. Attach wheels to wheel wells.
26. Congratulations! Your 2 Fast 2 Furious Nissan Skyline GT-R (R34) is complete! Thank you for building. </s> |
<s>[INST] Generate LEGO instructions for building a LEGO Technic Tow Truck set numbered 42031. [/INST] LEGO Tow Truck Building Instructions:
1. Bag 1: Place a 9x1 oblong piece on the table with holes facing front and back. Insert a long connector into leftmost hole, skip two holes, repeat on the right.
2. Bag 2: Insert a rotating long connector into the second hole from the left, skip two holes to the right. Insert another connector from the back, skip three holes, then insert a rotating long connector from the back. Set aside.
3. Bag 3: Place a 13x1 oblong piece on the table with holes facing front and back. Insert long connectors into specified holes and attach to main structure.
4. Bag 4-5: Attach double long connectors vertically to the 13x1 piece and insert a ridged Philips stick horizontally through the middle.
5. Bag 6: Assemble various parts together as instructed, connecting tubes and connectors.
6. Bag 7-9: Attach spectacles piece, connectors, and curved pieces to main structure as specified.
7. Bag 10-15: Continue adding pieces to the main structure, following instructions for each bag.
8. Bag 16-26: Complete assembly of the tow truck by adding remaining parts as instructed in each bag.
Enjoy your completed LEGO tow truck set! </s> |
<s>[INST] Generate LEGO instructions for set 60375 Fire Station and Fire Truck. Adapted by John Le and tested by Natalie Charbonneau. This set includes a toy firehouse with sleeping quarters, garage, and emergency slide, along with a fire truck featuring a flexible hose and roof ladder. Additionally, there is a popcorn cart, LEGO flames, a vendor, and 2 firefighter minifigures included. Perfect for kids aged 4+, this set offers nonstop firefighting fun. The fire station measures over 8.5 in. (22 cm) high, 7 in. (18 cm) wide, and 7 in. (19 cm) deep. Accessories like a toy spade, axe, radio, and cup enhance the [/INST] Building Instructions (Bag 1):
1. Assemble the firefighter Minifigure using black legs, firefighter uniform torso, female head, and neon yellow helmet. Insert the walkie-talkie into her hand.
2. Create the fire by connecting the flame to the cone, then placing the cone on the circular piece.
3. Build the Fire Truck:
- Place the dark grey car frame horizontally with 4 pegs.
- Attach wheels to the frame.
- Add red L-shaped bricks and a printed tile for the front.
- Install steering wheel, yellow plate, and blue tile.
- Place green brick, red panels, and blue chair.
- Add the roof structure with windows and details.
- Attach ladder and water hose.
Building Instructions (Bag 2):
1. Assemble the popcorn vendor Minifigure with dark blue legs, striped torso, male head, and light brown hair.
2. Create the popcorn on fire by connecting the flame to the cone and attaching it to the popcorn brick.
3. Build the Popcorn Vendor Cart:
- Place a red brick and cash register slope.
- Construct the popcorn cabinet with glass and ice cream top.
- Attach the cabinet to the red brick and add wheels.
- Insert a dark grey cylinder for support.
- Complete the cart with additional pieces.
Building Instructions (Bag 3):
1. Assemble the male firefighter Minifigure with printed uniform.
2. Build the Top Floor Part 1:
- Place smooth tiles on a light grey baseplate.
- Attach a red frame with printed glass.
3. Build the Top Floor Part 2:
- Repeat the process with another red frame and glass.
- Add black plates and complete the structure with slopes and tiles.
- Build a radar dish with tiles and a black pegged tile.
- Attach neon yellow tiles, antenna, speaker piece, and a dark grey brick. 1. Place a 1x1 holder clip brick on the right side of the previous brick with the clip facing you. Vertically place a 1x4 dark grey tile on the left side of the baseplate.
2. Put a blue chair and a 1x2 white keyboard tile on a 1x6 dark grey brick with a 1-stud gap between them. Position the chair in front of the keyboard.
3. Add a 2x8 tan brick to the left in front of the red 2x8x8 frame with a 3-stud gap from the blue chair.
4. Arrange two tan 1x2x4 bricks vertically on each side of the 2x8 tan brick. Place a 2x4 dark turquoise tile to the left of one brick and a white 2x2 tile to the right of the previous one.
5. Place a tan 2x8 plate horizontally on top of the carved-out bricks.
6. Position two 1x2 tan L-shaped tiles vertically on the left side. Add a 2x4 dark turquoise tile next to the left tile and a white 2x2 tile next to the previous one. Place the other L-shaped tile on the right side.
7. Insert two black fence pieces horizontally in the gaps facing you.
8. Stack this section on top of the previous one, ensuring alignment of the frames. Congratulations on completing the Fire Station and Fire Truck build! </s> |
<s>[INST] Generate LEGO instructions for building a Land Rover Classic Defender replica to celebrate the 75th anniversary of the iconic brand. The set includes a driver minifigure for role-play adventures. The model measures over 2.5 in. (7 cm) high, 4.5 in. (12 cm) long, and 2 in. (6 cm) wide. Enjoy portable play with this 150-piece set designed for ages 8+. [/INST] LEGO Building Instructions: Sub-build — Driver Minifigure:
1. Assemble the driver minifigure using tan legs, pineapple-patterned torso, female head, and dark orange hair. Reposition arms to look like holding a steering wheel.
Main-build — Land Rover Classic Defender:
1. Place a dark gray 2x12 plate horizontally in front of you.
2. On the 2x12 plate, center a black 4x4 plate. Add two medium gray 1x2 grille tiles, one on each side.
3. Flip the structure upside-down and add two black 2x2 plates symmetrically.
4. Attach yellow pegs and medium gray 2x2 plates with pin holes for axles.
5. Add black 2x2 plates on each side, overhanging one stud.
6. Place tan 2x2 modified tile and a medium gray 2x10 plate to form the left side of the car.
7. Add yellow 2x4 plates and medium gray 1x2 plates with rounded edges.
8. Attach black 2x2 half brick-half plates with arches.
9. Place a medium gray 4x6 plate horizontally.
10. Add a yellow 1x4 plate and a white 2x2 stair piece.
11. Attach yellow 1x2 bricks and 1x2 bricks with slopes.
12. Add more black 2x2 half brick-half plates with arches.
13. Attach medium gray steering wheel and tan 2x2 bricks with curved slopes.
14. Place a yellow 1x1 flat tile and a medium gray 1x1 headlight brick.
15. Add a black 1x6 plate and the headlight brick to it.
16. Attach a yellow 2x2 L corner brick and a regular yellow 2x2 brick.
17. Add a yellow 1x2 brick and a medium gray 1x2 brick with indentations.
18. Attach a yellow 1x4 flat tile and a black peg.
19. Add yellow 1x1x2 bricks, transparent red round 1x1 tiles, and transparent orange round tiles.
20. Place a long medium gray L bench-like panel.
21. Attach the structure to the rear of the car.
22. Add yellow plates to the front and back of the car.
23. Attach long yellow tiles to the rear of the car.
24. Add yellow slope pieces to the sides.
25. Attach a medium gray 1x4 plate and a tan 1x2 brick.
26. Add yellow 2x3 plates to the front and back.
27. Attach yellow 1x1 plates to the sides.
28. Add more pieces to the front of the car.
29. Attach yellow plates and tiles to the sides.
30. Place a black 1x4 window frame.
31. Repeat the window structure on both sides.
32. Repeat the window structure on the back.
33. Place a yellow 1x6 tile.
34. Prepare a medium gray 1x2 rounded plate.
35. Attach yellow stair pieces and the rounded plate.
36. Add yellow 2x2 L corner plates.
37. Attach yellow tiles and printed circle tiles.
38. Add yellow and black 2x2 tiles with printed circles.
39. Attach a black 2x3 tile and transparent circle tiles.
40. Place yellow 1x1 plates.
41. Attach the car grille sticker.
42. Add the structure to the main build.
43. Attach side mirror pieces and the windshield base.
44. Place a transparent window panel.
45. Add pieces to build the car hood.
46. Continue building the hood. 1. Place a 2x4 tile vertically to create a curved hood effect.
2. Attach two black 1x1 plates with hooks to make side mirrors.
3. Insert five black wheel rims into tires and attach to the car.
4. Place a yellow 2x4 plate vertically on the surface.
5. Stack a white 4x4 arch/bridge plate on top of the yellow plate.
6. Add a white 4x4 downward slope to connect the roof base.
7. Insert a yellow 1x4 plate to fill the gap in the arch piece.
8. Place yellow 1x4 and 1x2 plates symmetrically on the roof.
9. Add two black 1x6 plates to the edges of the roof.
10. Attach two black 3x6 pipe racks to complete the roof.
11. Attach the roof to the main build with the slope facing left.
12. Congratulations! The Land Rover Classic Defender is complete. </s> |
<s>[INST] Generate LEGO instructions for a Police ATV set (60006) featuring a Police ATV with steering wheel, movable lights, handcuffs, wheelbarrow, diamonds, a Police officer minifigure with a baseball cap, and a robber minifigure with a crowbar. Instruction art should depict a robber with a wheelbarrow full of diamonds and a crowbar being chased by a policeman on an ATV. Start by building the wheelbarrow with a small rubber tire on a double-sided button, insert it into the clasps at the bottom, add jewels and a crowbar, and give it to the robber. The robber wears a grey jumpsuit with black stripes, a helmet with notched edges, and carries a rope with keys. [/INST] Build the ATV:
1. Place a 6x2 horizontal piece on the table. Attach 2 2x2 axles underneath at the edges.
2. Add a 2x2 on the right edge. Attach a 2x2 with two 2x1 wings to the left. Then, add a 2x1 vertically to the left. Attach a 2x1 with two clasps vertically to the left, ensuring the clasps overhang to the left.
3. Place a 1x1 with a clasp horizontally to the right on the front corner. Repeat at the back. Insert a walkie-talkie into one clasp and handcuffs into the other. Skip one column to the left and add a 2x1 slide vertically, sliding to the left.
4. Add a 2x1 with a curved piece horizontally to the front, curving to the right, aligning the left end on the front wing. Repeat symmetrically at the back.
5. Attach a 2x2 with smooth wings vertically on the left edge, ensuring the wings slide to the left.
6. Add a 2x1 slide vertically on the left edge, sliding to the left. Place the steering wheel to the right of the front wheel.
7. Insert a smooth stick into the two clasps at the left edge. Add a 2x1 with a frame vertically on top at the right edge, in the middle.
8. Create two parts by stacking a 1x1 on a 1x1 with a clasp and a disk. Mount the parts on top of the frame with the disks on the left.
9. Attach a 1x1 with a clasp upright vertically on the stick at the left edge. Mount a disk on its button, placing the button to the left.
10. Assemble the tires onto the wheels and mount them onto the axles. Enjoy your completed ATV set! Thank you for building it! </s> |
<s>[INST] Generate LEGO instructions for building the LEGO City Penguin Slushy Van (60384). [/INST] Building Instructions:
1. Build Vendor Minifigure: Attach minifigure legs, slushy logo torso, head, and penguin mask. Create red slushy and place it in minifigure's hand.
2. Build Customer Minifigure: Assemble using short legs, tank-top torso, head, and hairpiece. The head has a reversible face. Create blue slushy as done for vendor.
3. Penguin Slushy Van Main Build:
a. Arrange blue 2x16 plate horizontally.
b. Add dark gray 1x4 sloped plate on far right for front.
c. Attach light gray 2x2 plates as axles for front wheels.
d. Add dark gray 1x4 sloped plate to the left.
e. Place light blue 1x6 plate with 2x6 plates vertically to the left.
f. Add orange 1x2 grille tiles and light gray 2x2 plates as axles for rear wheels.
g. Repeat step e to cover the remaining space.
h. Place white 2x16 plate centered over the assembly.
i. Add red 2x2 plate on the right.
j. Attach black 1x8 tiles above and below 1x4 sloped plate.
k. Place medium blue 2x2 bricks on axles for wheel wells.
l. Add white 1x2 inverted slopes in front of wheel wells.
m. Continue adding white bricks and slopes for design.
n. Place dark blue 2x2 plate for license plate.
o. Attach white bracket plates for front bumper.
4. Front Bumper/Penguin Face:
a. Place penguin face on the front of the van.
b. Add transparent orange and yellow slopes for lights.
c. Place dark blue 1x4 slope pieces on sides.
d. Fit white 2x4 plate in front.
e. Add black and white plates for detailing.
5. Interior and Final Touches:
a. Add windshield and hinged plate for door.
b. Attach tiles, panels, and menu sticker.
c. Place rail plate and additional detailing.
d. Add rear structure with lights and penguin picture.
e. Finish with license plate sticker. 1. Rotate the van 90 degrees counterclockwise. Place two dark gray 1x3 plates vertically at the back. Place two dark gray 1x2 plates with bars in front of the previous pieces. Place a dark gray 1x1 plate to the left. Place two dark gray 1x3 plates vertically on the windshield.
2. Place a transparent blue 1x4 wall panel on the rail from step 42.
3. Place a light gray 1x8 plate with rail between the two 1x2 plates with bars.
4. Build the slushy machine.
5. Place the slushy machine inside the van.
6. Make another menu and place it by the door.
7. Build the hinged van side.
8. Attach the hinged side to the van.
9. Build the roof of the van.
10. Place a white 5x6 curved brick with stickers on the windshield.
11. Add tiles and slopes to the van.
12. Build the giant slushy cup.
13. Attach the slushy cup to the van.
14. Attach wheels to the van. </s> |
<s>[INST] Generate LEGO instructions for building a 3D Australia Postcard (40651) featuring iconic outback sights like a shed, windmill, eucalyptus tree, desert flowers, cockatoo, 'Australia' plaque, and kangaroo road sign. The set is designed for kids aged 7+ and measures over 4 in. (10 cm) high, 5.5 in (15 cm) wide, and 1.5 in. (5 cm) long. The set includes 191 pieces and 54 building steps. [/INST] 1. Open bag 1 to find pieces for steps 1-6 and dark orange 1x2 tile from step 7. Two medium blue 1x2 tiles are in a separate sub-bag. Build a scene with dark orange hills, blue sky, clouds, and a plane.
2. Place a black 2x12 plate vertically in front of you.
3. Add pieces to form the scene's background: black 1x6 plates, black 4x12 plates, and dark orange and medium blue tiles.
4. Cover second and third rows with tiles, including dark orange and medium blue tiles.
5. Cover fourth and fifth rows with tiles, including medium blue and dark orange tiles.
6. Cover sixth and seventh rows with tiles, leaving out second and third columns from the left.
7. Cover fourth and fifth front rows with tiles, including medium blue and dark orange tiles.
8. Cover sixth and seventh front rows with tiles, except second and third columns from the left.
9. Cover most parts of the second and third front rows with tiles, except five studs.
10. Cover main piece with tiles, including a small plane with a red rudder.
Continue building the postcard base and eucalyptus tree:
11. Place three black 1x6 tiles horizontally on the front row.
12. Add white cloud pieces above second and third front rows and sixth and seventh back rows.
13. Build a small plane and attach it to the scene.
Continue with the base of the postcard:
14. Place a dark orange 4x6 plate horizontally.
15. Add black bricks and modified bricks to attach to the plate.
16. Attach black plates to the main piece below the 4x6 plate.
17. Add more black plates and tiles to the front of the main piece.
18. Attach black bricks and modified bricks symmetrically to the main piece.
19. Place two dark orange 4x6 plates horizontally to finish the base.
Finish the postcard and add details:
20. Place plates and tiles to cover the back right corner and back right 3x3 studs.
21. Add a medium nougat plate and slopes to the back rows.
22. Build part of the eucalyptus tree with arches and plates.
23. Continue building the eucalyptus tree with more arches and plates.
24. Add a light bluish gray 1x4 plate vertically and a dark bluish gray round plate with a hole.
Complete the scene with a traffic sign and additional details:
25. Build a pole for the kangaroo warning sign.
26. Add round plates and flower plates to the right side of the main piece.
27. Place round bricks and tiles, and a medium nougat plate with a sticker.
28. Add bricks and a stickered brick to the medium nougat plate. Rewritten LEGO building instructions:
1. Place a medium nougat 1x4 plate to the right of the same plate from the previous step, with the sticker facing forward.
2. Take a medium nougat 1x1 plate from a separate bag and add two trans-brown 1x1 plates on top. Position this piece to the left of the previous one to cover all studs on the medium nougat 1x4 plate.
3. Open group 7 for steps 30-35. For steps 33-35, use the flower plate group 1 bag.
4. Place a medium nougat 1x4 plate horizontally above the similar plate from step 27, with a reddish brown 1x2 tile centered in front.
5. Form supporting pillars for the roof using telescopes, slopes, and a round plate.
6. Build hinge bricks and grille tiles to create the aluminum shed roof.
7. Position green flower plates and tiles to frame the shed area.
8. Construct the windmill sub-piece by assembling various bricks and connecting it to the main structure.
9. Create a small wooden outside toilet and place it near the windmill.
10. Extend the eucalyptus tree using arches and plates.
11. Build and connect additional parts to complete the eucalyptus tree.
12. Connect the base of the postcard to the background, aligning the pieces as specified.
13. Add final details like a small flying plane and plant bricks to the tree.
14. Build a cockatoo in six steps and place it on the eucalyptus tree.
15. Add a kangaroo warning sign and an "AUSTRALIA" tile to complete the postcard. </s> |
<s>[INST] Generate LEGO instructions for building Disney's Aurora, Merida, and Tiana's Enchanted Creations set (43203). The set includes 558 pieces with buildable items for each princess, such as a transforming 'diamond' dress. Begin with Bags 1 and 2 to construct Princess Merida's castle, followed by Bags 3 and 4 for Princess Tiana's jewelry box, and finish with Bags 5 and 6 to assemble Princess Aurora's treasure chest. The set features Disney's Aurora, Tiana, and Pixar's Merida, encouraging endless princess play and imaginative storytelling. [/INST] Bag 1: Start by building Princess Merida. Place the blue torso on the blue octagonal dress piece, then add the head, hair, belt with a buckle, and gold hem. Construct her umbrella using the blue dress bottom and a gold wand piece. Create the archery target by assembling the pieces as follows: green 4x4 round plate, two light brown 2x1 plates, light green 2x2 curved tile, yellow 1x1 flower, brown 2x2 wedge plate, gold 1x2 plate with handle, white stepped 2x2 plate, and white round 4x4 tile. Attach the stickered plate vertically onto the archery target. Proceed to build a small castle/container using light tan plates and bricks, blue tiles, gold cylinders, window frame, and other pieces. Finally, insert the assembled target into the castle.
Bag 2: Begin constructing the larger castle for pencil storage using a green 16x8 plate, light reddish-brown 1x8 plate, light gray 1x1 round tile, yellow 1x1 flower, dark blue plates and tiles, dark blue and turquoise triangle plates, semicircular plate, and various bricks and tiles. Add the tower features such as golden bricks, torches, battlements, and decorations. Complete the tower by finishing the exterior with sloped bricks, curved bricks, flower pieces, and stickers. Finally, insert the princess's room into the castle and place the target on the round turntable for storing Merida's bow. 1. Open bags 3 and 4 to assemble Princess Tiana and the Frog using the provided pieces.
2. Take the green dress piece, torso, head, and hair to assemble Princess Tiana.
3. Insert the long golden shaft into the curved green umbrella piece to create the umbrella.
4. Arrange the green and pink tiles on the yellow bendy bracelet piece according to the provided coordinates or in a preferred pattern.
5. Fasten the bracelet around your wrist using the holes on the right and the pin on the left.
6. Build Princess Tiana's jewelry box by following the steps to assemble the base plate, bricks, and decorative elements.
7. Assemble Princess Aurora by placing the torso, head, hair, and dress pieces together.
8. Create Princess Aurora's umbrella by attaching the pink dress bottom piece to the gold wand piece.
9. Construct the treasure chest for Princess Aurora by arranging white and light blue plates, tiles, and decorative elements as instructed. 1. Attach a translucent pink 1x1 round tile to the left side stud of a 1x4 brick. Place a diamond-shaped 1x1 octagonal piece on the right side stud of the same 1x4 brick. Attach this 1x4 brick horizontally onto the middle two side studs.
2. Place two large blue 6x6 triangular plates below the hinged plates, aligning them with the right and left sides respectively.
3. Add translucent pink 1x1 round tiles on the large 6x6 pentagonal plates.
4. Attach a pink 2x1x3 brick to the right side of the pink 1x4 brick, followed by a 1x4x3 brick to the left, optionally adding stickers labeled with "2" and "7" inside.
5. Create stacks of pink and light blue bricks to form pillars and attach them to the structure.
6. Place white plates, arch bricks, and door bricks accordingly.
7. Add golden round bricks and triangular plates to enhance the structure.
8. Place white and light blue tiles in designated locations to build the structure.
9. Construct the cake and other decorative elements before assembling the roof.
10. Assemble the roof using pink and white plates and tiles, along with golden and light blue elements.
11. Attach the roof to the main structure and complete the assembly with additional decorative details. 1. Place two pink 2x2 bricks vertically on the left side, sloping away from each other. Repeat this for the right side.
2. Place four pink 1x2 plates vertically to complete the columns.
3. Add eight pink 1x1 large, sloped bricks in front and behind the plates.
4. Position two pink 2x4 plates vertically on each side.
5. Insert the large pink arch brick horizontally in the middle.
6. Place two white 2x4 tiles horizontally on each side.
7. Attach four golden 1x2 grilles to the 2x4 plates.
8. Add a golden 2x2 tile with two golden 1x2 grilles on either side.
9. Place a pink translucent tile and three golden pieces on the jumper studs.
10. Add diamond 1x1 round tiles and a pink ball to the golden pieces.
11. Install a golden 1x2 tile at the front and attach two golden long wavy pieces as icicles.
12. Attach the roof to complete the build. Enjoy your enchanted creation! Thank you for building this set! </s> |
<s>[INST] Generate LEGO instructions for set 10244 - Lego Fairground. [/INST] **Book 1: Minifigures and Booth Construction**
1. Build a man on stilts with skittles.
2. Construct transport for midway booths as follows:
a. Assemble a base using various pieces.
b. Create a connecting part with specific components.
c. Add details and set aside.
**Book 2: Truck and Trailer**
3. Make the truck and trailer for the Fairground Mixer.
**Book 3: Fairground Mixer Ride**
4. Assemble the Fairground Mixer ride and fence.
**Large Bag 2: Strongman Booth**
5. Build the Strongman booth:
a. Construct the base structure.
b. Attach various pieces following specific instructions.
**Large Bag 2: Dunk Tank**
6. Create the Dunk Tank:
a. Build the tank structure with shelves and corners.
b. Make a target part and attach it to the structure.
c. Add a door and finishing touches.
**Large Bag 13: Hammers and Hammer Holder**
7. Assemble a stand for the small hammer.
8. Create a small hammer with specific components.
9. Build a large hammer with detailed steps.
10. Make the dunk tank structure with ladder and components.
11. Construct a target piece with stickers and disks.
12. Add doors and final details to complete the dunk tank structure. Build the dunk tank:
1. Place a 6x1 on the left wall and a 6x1 ver on the right wall.
2. Add a 2x1 ver on the front left end and a 2x1 cornice ver two rows back on the right.
3. Put a 1x1 to the back and a half-cylinder on the front wall with stickers.
4. Attach a F 2x1 with a top hinge hor on each end, adding a F 2x1 hor and a F 4x1 hor in the middle.
5. Create two fence parts and mount them at each end.
6. Add a minifigure to complete the dunk tank.
Assemble the ticket booth:
1. Build two table parts with 2x1 pieces and arches.
2. Place two balls on the table next to the dunk tank.
3. Construct the ticket booth using a 6x6 base and small pieces for drawers and decoration.
4. Install a cash register and sticker for ticket prices.
Construct the truck and trailer:
1. Build the truck by assembling parts for the base, cannon, and connectors.
2. Add details like a license plate and side panels.
3. Create the trailer by following the step-by-step instructions provided in the manual.
Enjoy building and thank you for completing this set! </s> |
<s>[INST] Generate LEGO instructions for building a toy police car with space for the police officer minifigure included. The set includes a toy flashlight and police cap for the minifigure. Suitable for kids aged 5 and up. When built, the police car measures over 1.5 in. (4 cm) high, 4.5 in. (11 cm) long, and 2 in. (5 cm) wide. [/INST] Build the police officer Minifigure by putting together legs, torso, head, and hat. He wears blue pants, a police uniform with epaulets, 2 breast pockets (one with a badge), a tie, and has a walkie-talkie. Attach a flashlight to his hand. Next, build the police car:
1. Place yellow 1x4 plates at the front and back rows of the black base.
2. Add steering wheel, back seat, and car body parts.
3. Attach "Police" signs at the front and back of the car.
4. Connect the assemblies with blue 1x6 plates.
5. Add mudguards, slopes, and tiles for detail.
6. Put together the rear bumper with lights.
7. Attach bumper support plates.
8. Add tiles and grille pieces for finishing touches.
9. Place wheels and rims on the axles.
10. Insert the engine piece.
Attach flashlight to the car. The roof can be removed to place the police officer inside. </s> |
<s>[INST] Generate LEGO instructions for set 8092 Luke's Landspeeder. [/INST] Build the Minifigs:
1. Sandtrooper: Assemble the sandtrooper with a large helmet, white clothes, black belt, and a cape. Attach a jet-pack to his back.
2. Luke: Put together Luke with a simple cloth tunic and a silver belt buckle.
3. C3PO: Build C3PO, chrome in color, with unique stomach features.
4. Ben Kenobi: Construct Ben Kenobi with a simple tunic, brown belt, and gray beard.
5. Light-sabers: Give Luke and Obi-Wan their light-sabers.
6. R2D2: Connect legs to the cylindrical body and top with a dome.
7. Sentry Droid: Assemble the droid using various pieces.
8. Landspeeder: Follow the step-by-step instructions to build the landspeeder.
Enjoy building this set and visit legofortheblind.com for more accessible instructions! </s> |
<s>[INST] Generate LEGO instructions for building The Mandalorian N-1 Starfighter Microfighter (75363). The set includes an open cockpit for The Mandalorian minifigure, space for Grogu figure, and 2 stud shooters. The Mandalorian comes with a blaster pistol and jetpack. Combine with other LEGO Star Wars Microfighter sets for more play options. Suitable for kids aged 6 and up. The set is 88 pieces and has 37 building steps. [/INST] LEGO Building Instructions:
Step 1: Assemble Mandalorian minifigure.
Step 2: Assemble Grogu minifigure.
Main Build:
Step 1: Place a light gray 3x6 plate vertically with angled side on the right.
Step 2: Add dark gray 1x1 circular plates to left and back studs.
Step 3: Place light gray 2x4 plate centered horizontally overhanging to the right.
Step 4: Flip ship, add light gray 2x2 inverted curved slope tiles to right two columns.
Step 5: Add dark gray 2x6 plates with rounded corners.
Step 6: Assemble stud shooters.
Step 7: Add dark gray 1x4 and orange 1x2 plates.
Step 8: Place black 2x2 plate.
Step 9: Add light gray 1x1 slope tiles.
Step 10: Place dark gray 2x6 plate with axle bricks.
Step 11: Add black 1x2 bricks with axle holes.
Step 12: Flip ship, add light gray 2x2 inverted curved slope tiles.
Step 13: Start lower fuselage.
Step 14: Add light gray 1x4 left and right wedges.
Step 15: Place dark gray 2x2 corner plates.
Step 16-22: Add various plates and tiles.
Step 23: Add plates for Grogu seating.
Step 24-27: Place bricks and bars.
Step 28-30: Add finishing details.
Step 31-35: Build and attach engines.
Step 36: Attach engines to ship.
Step 37: Load side shooters and launch plates. Congratulations! The Mandalorian N-1 Starfighter Microfighter is complete! Thank you for building! </s> |
<s>[INST] Generate LEGO instructions for building a replica of the 1962 Volkswagen T1 Camper Van, featuring iconic exterior details such as the 'V' shape three-way color split, rounded roof, opening 'splittie' safari windshield, and pop-up roof. Include interior details like the VW air-cooled flat four cylinder boxer engine, front cabin bench seat, gear stick, angled dashboard, spherical speedometer, folding rear bench seat, dinette table, closet with mirror, and painting. [/INST] 1. Place a F 12x2 vertical piece on the table. Add a F 12x1 vertical piece on top, to the right.
2. Add a F 2x1 vertical piece to the left, in the middle. Skip two buttons back and add a F 4x2 vertical piece that overhangs to the left and back. Repeat on the front.
3. Put a F 8x4 vertical piece to the left under the two PPs. Add a F 2x1 vertical piece with one button in the middle of the rightmost column.
4. Place a F 1x1 roll piece on top of the PP, roll to the right. Skip one column to the left and add a FS 4x1 vertical piece in the middle. Add a button at the back. Repeat on the front. Add a F 3x1 horizontal piece to the left and front, touching corners with the PP on the front edge. Repeat at the back.
5. Add a 2x1 slide vertical piece to the front, skipping the leftmost column. Repeat on the front. Place a 3x2 horizontal piece to the right, skipping a row to the front. Repeat at the back. Add a FS 1x1 on top of the roll piece.
6. Place a 2x1 vertical piece to the left in the middle. Skip five rows to the front and add a 1x1 with a side button, button facing the front. Add a 1x1 with a side button to the right, button facing the front. Repeat steps 2-3 at the back.
7. Insert a longer fluted stick halfway into a faceted tube from the left. Insert a shorter fluted stick into the faceted tube from the right. Add another tube from the right, leaving a space of about one button in the middle. Insert another longer fluted stick from the right. Add one small nut from the left and one from the right. Add a 14x1 horizontal piece on the table. Insert a part from the front into the sixth hole from the right. Add another 14x1 symmetrical piece at the front. Add a small nut at the front and another at the back. Install onto your structure so that the tubes go to the left of the slides.
8. Add a F 8x2 vertical piece in the middle of the two rightmost columns. Place a F pizza piece to the front and left, curved corner to the right and front. Repeat at the back.
9. Add a F 1x1 with a horizontal clasp to the front of the leftmost column of the PP, clasp facing the front. Insert a two-button hose into the clasp near its bottom. Repeat steps 1-2 at the front. Insert a tiny connector into the hole in the front 14x1 from the front, to the left of the stick. Insert another tiny connector to the left. Repeat steps 4-5 at the back. Put aside.
10. Place a F 8x1 horizontal piece on the table. Add a F 3x1 horizontal piece on top, starting from the left. Repeat on the right. Add a F 3x1 from a separate bag on top of the PP. Repeat on the left. Add a 2x1 with side holes vertical piece to the right and front. Add another 2x1 with side holes vertical piece to the right. Add a 2x1 horizontal piece on top of the back buttons of the two PPs. Place a 1x1 to the left (stepped down). Add a 1x1 with a slide horizontal piece to the left, slide to the left. Repeat the last two steps symmetrically on the right. Put two 2x1 curved horizontal pieces in the middle to make a complete curve. Insert a connector from the left into the side hole of the protruding middle part. Repeat symmetrically on the right. Put S tubes onto the connectors. Add two 1x1 with side buttons on top of the protruding part, side buttons to the sides. Install this part vertically, protruding end to the right, onto your structure, S tubes on top of the faceted tubes.
11. Insert the top end of the front bendable hose at the right of your structure into the front side button of the protruding part. Repeat symmetrically at the back. Put aside.
For the rest of the instructions, you can continue to condense the steps in a similar manner to enhance clarity and conciseness. 1. Move the third button from the front, left side, to the left. Attach a 2x1 wedge to the back. Place a sticker on it that reads the license plate.
2. Attach a 1x1 wedge to the back, left side. Add a FS 3x1 vertical piece on the right, starting from the front.
3. Place a F 2x1 with one button vertically to the back. Add a FS 3x1 vertical piece behind it.
4. Attach a FS 2x1 vertical piece to the left back. Symmetrically add a FS 2x1 vertical piece at the front.
5. Add a FS 6x1 vertical piece to the left and back. Place a 1x1 button in the middle of the right edge.
6. Underneath the FS 8x1 piece on the left, add three F 2x1 pieces with cornices vertically.
7. Insert sled handles into clasps and install it on the right side.
8. Stack a F 2x1 piece on top of another F 2x1 piece and place it on the front pizza piece.
9. Continue adding various pieces according to instructions, symmetrical placements, and numbering each step for clarity. Build instructions:
1. Place FS 4x1 horizontally overhanging on sides. Add hammer pieces at sides, left and right. Put two F 1x1 under the ends and two 1x1 underneath for the back frame. Install seat symmetrically as part of the left wall.
2. Start front wall by adding 1x1 wedge upright on the side button of a 1x1, then a 6x1 horizontally. Repeat. Place 3x1 horizontally to the left and a tall 2x1 window frame vertically at the back left-most button.
3. Add layers to front wall: 3x1, 6x1, repeat. Then add F 3x2 horizontally with F 1x1 on its back row and F 12x1 to the front left.
4. Begin front wall with 1x1, then 6x2 horizontally, followed by 4x2, 2x1 at the front, 2x2 lip, 6x2 horizontally.
5. Construct left side: Place two 1x1 buttons on a 2x1 piece with a handle and insert vertically into the left side. Attach a half-connector with a 1x1 button to the gavel piece and install vertically into the back left clasp.
6. Continue with left side: Add 1x1 wedge upright, two-button corner piece, 1x1 side button, and 4x1 with side buttons vertically. Repeat symmetrically.
7. Install FS 2x1 horizontally on the left edge, followed by F 3x1 vertically and a stack of two F 4x1 vertically. Repeat symmetrically.
8. Make a folding table by stacking two F 8x1 horizontally, adding pieces on top, and placing a glass. Install over the second row gap in the front wall.
9. Place various pieces to create the back wall door, including F 8x1, gun handle, lip pieces, and hinges. Install over the axle.
10. Construct back for front seat using various sized pieces in a specific layout.
11. Make a steering wheel by assembling pieces and placing it in the front right corner. 1. Place a F three-button corner piece on top, overhanging to the back, and add a F 2x1 vertical piece on the right.
2. Add a 1x1 with a side button on top, at the front with the side button to the right.
3. Place a 3x1 horizontal lip piece on top, overhanging to the left, and install it at the front right corner.
4. Add a FS 2x1 piece on top of a 2x1 shelf with a slot piece horizontally, to the left of the bench piece.
5. Create a part by assembling various pieces.
6. Repeat steps to create two similar parts and place them as described.
7. Make three windows and position them accordingly.
8. Assemble another part with specific pieces and place it as directed.
9. Continue building parts and placing them per instructions.
10. Assemble the roof parts starting with a F 12x6 piece on the table and following the steps provided.
11. Construct the moving parts of the roof, following detailed steps.
12. Make additional parts for the roof and install them.
13. Create the left part of the roof following the provided steps to complete the assembly. 1. Place the rightmost button of the front row to the back and right. Repeat symmetrically to the back.
2. Attach an 8x2 horizontal piece to the back of the front slides, overhanging to the left. Repeat symmetrically at the back.
3. Add a 4x2 horizontal piece to the front, starting to the left of the wing. Then add another 4x2 horizontal piece to the front.
4. Place a 4x1 vertical piece to the left and back. Set aside momentarily.
5. Create a part by assembling various pieces as follows and install it in the middle of the two left columns of your part (protruding to the left):
- Build a structure with specific pieces: F 4x4, F 3x2 horizontal, FS 2x1 vertical, F 4x1 vertical, F 2x2, and more.
6. Continue building and assembling parts, following the detailed steps provided for each section.
7. Assemble the wheels by stacking parts and installing them as needed.
8. Follow the instructions to create additional parts and install them accordingly.
9. Enjoy building this set and thank you for your effort! </s> |
<s>[INST] Generate LEGO instructions for replicating the iconic Statue of Liberty with over 1,685 LEGO pieces. The set features intricate details like the shield-lined pedestal, columned balconies, and a Lady Liberty statue complete with a flowing robe, 7-ray crown, iconic tablet, and golden torch. The finished model stands over 17” high, 5” wide, and 5” deep. The accompanying booklet provides insights into the history, architecture, and design of this renowned landmark. Ideal for those interested in architecture, travel, history, and design. [/INST] **Bag 1 Building Instructions - Condensed Version:**
1. **Base Construction:**
- Stack plates to form base.
- Add Statue of Liberty tile.
- Attach additional plates and tiles for structure.
2. **Detailing and Finishing:**
- Add tan tiles and plates for detailing.
- Attach corner plates and bricks.
- Complete with slope bricks and finishing touches.
3. **Bag 2 Building Instructions - Condensed Version:**
1. **Pedestal Assembly:**
- Build side assemblies with tan bricks.
- Stack and place on pedestal base.
2. **Corner Detailing:**
- Create and stack corner assemblies.
- Place in corners to finish pedestal.
3. *(Remaining steps not included for brevity)*
By condensing the instructions, the steps are simplified and streamlined for easier understanding while retaining essential information. 1. Take a white 3x3 triangular brick and a yellow 1x1 round brick. Place the yellow brick in the corner opposite the long side of the triangular brick, vertically. Make four of these and attach them inside the pedestal corners, pointing inwards.
2. Use two red and two blue 1x6 bricks to outline a 7x7 square around the yellow 1x1 round bricks. Ensure correct positioning as specified.
3. Place four 2x2 tan plates with one stud in the corners, connecting to the previous layer. Then add eight tan 2x4 tiles along the edges.
4. Stack a red 2x3 brick, two light gray 2x2x2 bricks, and two yellow 2x1 plates with an extended edge. Make four assemblies and place them in the corners, maintaining specified orientations.
5. Create an outline with four white 1x6 plates for a 7x7 square over the yellow 2x1 plates, connecting the assemblies.
6. Build four assemblies with blue and dark gray tiles according to the specified pattern. Place them horizontally over the side studs from the previous step, aligning the grilled tiles.
7. Use red and blue 1x6 bricks to outline a 7x7 square and place it over the white 1x6 plates.
8. Create four assemblies with tan 2x1 plates and one stud each. Place them over the side studs from step 33, pointing outward in different directions.
9. Build corner assemblies and place them in each corner, completing another layer of the pedestal.
10. Assemble tan plates to create a square over the pedestal, ensuring a secure fit.
11. Use red lift arms to connect and secure the structure through the base hole.
12. Assemble tan and white plates to form squares for the top layer and place them on the pedestal.
13. Add green tiles to the corners and edges of the top layer.
14. Place red, blue, white, and gray bricks in specific configurations to complete the top layer.
15. Finish the structure by placing additional green tiles and panels in the designated areas.
16. Secure the entire structure by connecting the pieces according to the instructions.
17. Your structure is now complete. 1. Place a green 2x4 tile to the left of a 1x4 tile, then add a green 3x1 tile horizontally, followed by a green 1x1 plate and two more green 3x1 tiles.
2. Stack two red 2x1x2 bricks, add a gray 2x1x2 brick, and a yellow 3x1 brick with green bricks with side studs symmetrically placed.
3. Create a part with dark gray 1x1 brick, green bricks, and plates, then add a green 1x2 trapezoidal sloped tile for the foot.
4. Add a green 3x1 plate, a green 2x1 plate, and a green 1x3 plate with bricks as done in step 2.
5. Place black 2x2 corner plates and green 1x4 plate to form a 3x4 outline.
6. Place blue and gray plates and bricks with side studs as directed.
7. Add white, green, gray, and red bricks to complete the layer outline.
8. Place blue and gray plates with round plates to finish the layer.
9. Place dark gray plates with green cones, round plate, and green bricks.
10. Add a green 2x6 plate with side studs and build up the assembly.
11. Stack green plates and bricks to create a sloped tile assembly.
12. Place a green 1x1 sloped trapezoidal tile and plates to continue the assembly.
13. Stack green plates and bricks for a sloped tile assembly, then place it on the structure.
14. Stack green plates and bricks for a sloped tile assembly, then place it on the structure.
15. Place green plates and tiles to finish the statue's top part.
16. Place green plates and tiles to complete the final details of the statue.
17. Stack two green 1x3 plates vertically. 1. Place a 1x6 plate vertically. Add three 1x2 sloped tiles vertically, sloping right, with the middle tile connecting them. Attach this assembly low on the statue's right column, above the previous step’s assembly, but one stud higher.
2. Add three 1x2 sloped tiles to the left of the previous step, sloping right and offset by one stud vertically.
3. Build a part: Vertical 2x3 plate, 1x2 plate, 1x2 tile, and two sloped tiles. Attach this assembly to the left of the previous pieces, above step 83's assembly, with the sloped tiles sloping down and right.
4. Build a part: Vertical 1x3 plate, sloped curved tile, regular tile, and sloped trapezoidal piece. Attach this to the back of the statue’s second right column.
5. Build a part: Horizontal 2x6 plate with sloped tiles and trapezoidal pieces. Attach this to the left of the previous assembly, with trapezoidal tiles merging into the statue's neck.
6. Rotate the statue clockwise. Build a part: Vertical 1x4 plate with green pieces. Attach this to the statue’s bottom right gap.
7. Build a part: Horizontal 2x2 plate with green pieces. Attach this under the structure.
8. Build a part: Vertical 1x2 plate with a 2x2 sloped tile. Attach this to the assembly's side studs.
9. Place this assembly against the statue. Add a 1x3 tile to the front side studs.
10. Build a part: Horizontal 2x2 plate with green pieces. Attach this above the previous assembly.
11. Build a part: Horizontal 2x3 plate with sloped tiles and trapezoidal pieces. Attach this below the previous assembly.
12. Build a part: Horizontal 2x2 plate with sloped tiles and trapezoidal pieces. Attach this below the previous assembly, overhanging to the right.
13. Build a part: Horizontal 2x3 plate with sloped tiles and trapezoidal pieces. Attach this below the previous assembly, overhanging to the right.
14. Build a part: Horizontal 2x2 plate with sloped tiles and trapezoidal pieces. Attach this below the previous assembly, overhanging to the right.
15. Build a part: Horizontal 2x3 plate with sloped tiles and trapezoidal pieces. Attach this below the previous assembly, overhanging to the right. 1. Attach a green trapezoidal tile (right) to the front right stud of a 2x2 tile, and a green 1x1 sloped trapezoidal tile (left) to the front left stud to form a pentagonal shape. Place this on the left side of the statue.
2. Rotate the statue 90 degrees clockwise. Build a part with green plates and tiles vertically, then place it at the bottom of the statue.
3. Create another part with green plates and tiles and place it on the front of the statue, forming a rectangle of grilled tiles.
4. Build a part with two green 2x6 plates vertically and add a gray 2x4 and round plates. Attach green sloped tiles to form a shape and place it on the assembly.
5. Assemble green plates and tiles to create parts and place them on the statue accordingly.
6. Place a green 2x3 plate, a blue 2x1 plate, and a green 3x1 plate with sloped tiles on the front of the statue.
7. Construct more parts with green plates and tiles, then place them on the statue as instructed.
8. Arrange green plates and tiles to form parts and place them on the statue, ensuring they align correctly.
9. Place a green 3x1 plate with sloped tiles and additional plates on the front and leftmost studs of the 2x6s.
10. Build more parts with green plates and tiles, then position them on the statue.
11. Place the final assembly on the right side of the statue to complete the front.
12. Assemble a part with green plates and sloped tiles and place it on the bottom right of the statue.
13. Create a part with green plates and tiles and position it on the rightmost column of vertical side studs near the bottom.
14. Attach green 2x1 grilled tiles on the front of the statue in a specific pattern.
15. Make a part with green plates and bricks and set it on the statue as described. Refined Instructions:
1. Build the base:
- Place green sloped tiles in sequence.
- Add plates and tiles to form the base structure.
- Attach sloped trapezoidal tiles.
- Position the assembly vertically on the front side of the statue.
2. Construct additional parts:
- Build parts using plates, tiles, and sloped trapezoidal tiles.
- Mount parts onto the statue as instructed.
3. Create the torch:
- Assemble the torch using flame and cone pieces.
- Connect the torch to the assembly.
4. Complete the statue:
- Build the crown and attach it to the statue.
- Add a tile and pentagonal piece below the crown.
- Attach the arm holding the scroll.
- Enhance the base with handcuff pieces.
Congratulations on completing the set! Thank you for building with us! </s> |
<s>[INST] Create detailed LEGO instructions for building three models from the LEGO Creator 3in1 Exotic Pink Parrot set (31144): a pink parrot perched on a tree branch, a pink fish swimming by a coral reef, and a pink tree frog. The parrot model has 253 pieces and 108 building steps, the fish model has 122 pieces and 61 building steps, and the frog model has 84 pieces and 52 building steps. Each model has posable features and vibrant colors, providing a fun and engaging building experience for kids aged 7 and above. [/INST] Building Instructions: Side Build - Tree Branch with Flowers
1. Start with the base of the branch:
- Place a green 4x6 half circular plate with its flat side at the back.
- Add a dark brown 2x2 circular brick on the back row, centered horizontally.
2. Build up the branch:
- Add another green 4x6 half circular plate behind the first to form a full circle.
- Attach dark green 2x2 slopes around the circular brick.
3. Extend the branch:
- Place a light brown 4x4 circular plate on top.
- Add dark brown 2x2 circular plates and bricks to build height.
4. Add a trunk to the branch:
- Attach a light brown 2x2 circular tile with a hole to a dark brown 2x2 circular brick to create the trunk.
- Connect the trunk to the branch using a gray axle.
5. Enhance the branch with leaves and flowers:
- Attach green plant leaves and robot arms to create a natural look.
Main Build - Pink Parrot:
25. Start building the parrot's feet:
- Insert a blue axle/pin combo into the straight axle connector on the branch.
- Add a black pin connector with lift-arms for the feet.
26. Create the perch for the parrot:
- Assemble a stick for the parrot to perch on using axles and bushings.
27. Attach the parrot's feet:
- Slide thin bushings onto the axle for the parrot's feet.
37. Add talons to the parrot:
- Attach claws to the bar connector for the parrot's talons.
39. Build the parrot's body:
- Construct the body using plates and bricks, attaching it to the legs.
40. Focus on the parrot's chest:
- Create the chest using various bricks and plates.
These streamlined instructions aim to make the building process easier to follow without losing any crucial details. 1. Move the side tiles from steps 47.1-47.2 to the back of the body.
2. Place a magenta 1x2 tile horizontally on the bottom left two side studs on the front of the body.
3. Above the previous piece, place a pale yellow 1x4 tile vertically on the leftmost side studs on the front of the body.
4. Set aside the parrot's body and start making the back:
- Place a dark pink 2x3 plate horizontally in front of you.
- Add a magenta 2x4 plate extending one stud to the left.
- Place a black 2x2 plate with two side studs under the previous piece.
- Add a dark pink 2x3 plate on top of the back.
- Place a black 2x2 circular plate on the rightmost two columns.
- Add a magenta 2x4 curved slope tile on the left four columns, aligning with the body steps.
- Continue building the back following steps 56.1-56.2.
5. Attach the back to the left side studs of the parrot's body, aligning the bottom with existing tiles.
6. Build the sides of the parrot symmetrically using light pink, dark pink, and magenta plates and tiles.
7. Make the parrot's chest with light blue and dark pink plates and slopes. Attach it to the right side studs of the body.
8. Attach the body onto the legs.
9. Begin building the right wing using magenta, dark pink, lavender, and medium blue plates and slopes.
10. Add feathers to the wing using various colored tiles and plates.
11. Attach the wing to the parrot's body and ensure it can move freely.
12. Build the tail using light blue, medium blue, teal, dark pink, and pale yellow plates and slopes.
13. Attach the tail to the body, allowing free movement.
14. Repeat the process to build the left wing symmetrically to the right wing.
15. Create the bird's head using dark pink, magenta, light pink, and dark blue plates and slopes.
16. Make the parrot's face using black and white plates and bricks.
This revised set of instructions condenses the information for clearer and more concise building guidance. Build the Parrot's Head:
1. Attach two white 1x2 bricks with notches to the face, extending one stud past the head.
2. Place dark pink 1x3x2 curved slopes on the left columns of the head.
3. Add white 1x1 bricks with side studs on the rightmost stud of the head.
4. Put black 1x1 circular tiles with eye patterns on the face.
5. Create the beak by adding white and black plates and slopes.
6. Attach a dark pink slope and magenta tile to connect the head and beak.
7. Add quarter circle tiles to the head for eyes.
Assemble the Exotic Pink Fish:
1. Start with a magenta 2x4 plate as the base.
2. Build up the body with black and dark pink plates.
3. Add white bricks with side studs, circular pieces, and slopes for details.
4. Attach a dark green slope and curved slopes to the fish's body.
5. Create the mouth using tiles and plates.
6. Construct the sides of the fish with various colored pieces.
7. Build the underside of the fish with a variety of plates and slopes.
8. Attach fins using light gray pieces.
9. Build the top of the fish with magenta, dark pink, white, and medium blue pieces.
10. Add dorsal and tail fins to the fish for a complete look. Build the fish by assembling its tail, attaching it to the main body, and adding coral reef. Attach the fish to the reef. Build the kelp plant. Assemble the frog's body and jaw, then add legs. Connect the upper and lower body parts of the frog and attach the feet.
For the LEGO fish:
1. Build the tail with two 2x2 plates and two slopes.
2. Attach the tail to the main body.
3. Construct the coral reef.
4. Connect the fish to the reef.
5. Build the kelp plant.
For the LEGO frog:
1. Build the lower body.
2. Attach the lower jaw.
3. Create the upper body.
4. Connect the upper and lower body parts.
5. Add the feet and toes to the legs. 1. Attach a dark pink 1x1 quarter circle tile with rounded edge to the leftmost stud.
2. Assemble the leg by placing the upper leg one stud to the left of the lower leg.
3. Connect the leg tow ball socket to the front left tow ball on the frog.
4. Build the front leg using specific plates and tiles.
5. Attach the eyes symmetrically on the front and back of the frog.
6. Create more frog legs using a lime green plate and specific plates and tiles as detailed.
7. Attach a black 2x2 plate with side studs at the back.
8. Place a light pink 1x4 plate centered on the front row of the previous piece.
9. Assemble the leg by placing the upper leg one stud to the right of the lower leg.
10. Connect the leg tow ball socket to the front right tow ball on the frog to complete the back legs.
11. Build the last leg using specific plates and tiles.
12. Attach the back right stud on the foot to the curved slope on the frog to complete the frog.
13. Description of the completed frog model. </s> |
<s>[INST] Generate LEGO instructions for building a Batman minifigure with a portion of a building for him to pose on. The set includes Batman with a black cape, mask, yellow oval bat symbol on his chest, and a batarang. The front of the polybag shows Batman standing on a gargoyle-shaped building corner in Gotham City at night, with a bat symbol projected in the sky. The set consists of 40 pieces and 14 building steps. [/INST] LEGO Building Instructions:
- Open bag 1 and minifigure group 1.
- Assemble Batman minifigure: torso on legs, head on torso, mask with cape on head, and batarang in hand.
- Main build:
1. Build Gotham City skyscraper corner with gargoyle:
1.1. Place light gray 3x3 plate.
1.2. Add black 2x2 brick.
2.1. Place light gray 1x2 inverted slope and dark gray 1x1 brick.
2.2. Add dark gray 1x1 bricks.
3. Place light gray 2x2 double inverted slope.
4. Add dark gray 4x4 plate.
5.1. Place dark gray 1x2 plate and black 1x2 plate with clip.
6.1. Place light gray 2x2 tile and 1x1 circular plate.
6.2. Add light gray 1x1 circular plate and dark gray 1x1 slope tile.
7.2. Attach black batarang to clip.
- Open group 2:
8. Place black 2x2 brick.
9.1. Add dark gray 1x2 masonry brick.
9.2. Place dark gray 1x1 brick.
10. Add light gray 3x3 plate.
11. Place dark gray 2x2 tile with stud.
12.1. Start gargoyle: place light gray 1x1 circular plate.
12.2-12.6. Build gargoyle wings and attach to main build.
13.1. Build gargoyle head using binoculars and claws.
13.2. Attach head assembly to main build.
14.1-14.2. Place dark gray pieces on top of the build.
15. Attach Batman minifigure to complete the set. </s> |
<s>[INST] Generate LEGO instructions for building the Arctic Explorer Ship (60368) set, including a toy exploration ship, helicopter, dinghy, ROV submarine, and Viking shipwreck. Set includes 7 minifigures, an orca figure, and various accessories. Dimensions: 7.5 in. (19 cm) high, 28 in. (71 cm) long, and 6.5 in. (17 cm) wide. Suitable for kids aged 7+. Total of 815 pieces with 244 building steps. [/INST] Building Instructions: Inflatable Dinghy & Orca Minifigure
Minifigure 1:
1. Attach legs, life preserver, and head to torso. This minifigure wears blue pants, white shirt, blue vest, and orange life preserver. He has long black hair and a black goatee.
Minifigure 2:
2. Attach legs, life preserver, and head to torso. This minifigure wears an orange and blue survival suit with gloves, beard, glasses, and curly black hair.
Camera Build:
3. Assemble camera: place pieces as follows - bar tile, round plate, cone, clear plate. Attach camera to researcher minifigure.
Orca:
4. Snap lower jaw into upper jaw.
Dinghy Build:
5. Assemble dinghy components as follows: base, tiles, steering wheel, slope tiles, fence pieces, plates, camera holder. Place driver and researcher minifigures in boat.
Viking Shipwreck:
6. Assemble diver minifigure and accessories.
7. Build shipwreck base and attach serpent neck.
8. Attach shipwreck ribs, seaweed, treasure chest, battle ax, shield, crab, and helmet.
9. Construct submarine: base, dome, propeller, and details. **LEGO Building Instructions:**
**Submersible:**
1. Rotate the submersible 90 degrees counterclockwise.
2. Attach black thick robot arms with clips to the dome.
3. Slide orange bars into the arms.
4. Rotate clips until parallel with the ground.
**Helicopter Pilot:**
1. Assemble pilot minifigure with torso, legs, head, and helmet.
2. Add clear visor to helmet.
3. Choose hair or flight helmet.
4. Pilot also has a wrench.
**Researcher Minifigure:**
1. Assemble researcher minifigure with torso, legs, head, and hair.
2. Researcher wears blue pants, white shirt, blue vest, and carries a laptop.
**Helicopter:**
1. Place dark gray 2x6 plate horizontally.
2. Add plates and slopes to build structure.
**Helicopter Tail:**
1. Attach tail fin, propeller, and tail assembly to the helicopter body.
**Helicopter Rotor:**
1. Attach rotor base with tiles to the top of the helicopter.
**Floats:**
1. Build floats using orange bricks and cones.
2. Attach floats to the front and back of the helicopter.
**Ship Crew and Quarters:**
1. Assemble researcher minifigures with torso, legs, head, and hair.
2. Place ship bow piece in front of you.
3. Add bricks and tiles to create crew quarters and beds.
4. Place coffee mug and windows in crew quarters.
**Ship Deck and Facilities:**
1. Build the ship's bathroom with bricks and tiles.
**Ship Deck Extension:**
1. Build deck extension for bathroom, workstations, and galley.
**Note:** Follow the numbered steps for each section to complete the LEGO assembly. 1. Place a semi-circular tile in front of the previous piece, with the rounded end at the front.
2. Find two white 1x4x3 tall bricks, a white 1x10 brick, and a white 1x1 brick. Stack the tall bricks on top of each other.
3. Place a white 2x2 corner brick on top of the last two pieces from the previous step.
4. Find two white 1x2x3 tall bricks and stack them vertically long in front of the previous piece.
5. Place a white 1x6x6 door frame horizontally, attach doors into the frame, and add a round plate to each door.
6. Place a light blue 1x6 tile, a dark gray 1x2 tile, and a dark gray 1x2 plate with a ladder in the specified positions.
7. Place two dark gray 1x4 tiles on the left and right sides accordingly.
8. Rotate the ship and place a white 1x2x3 tall brick and a white 1x1x3 tall brick in the specified positions.
9. Continue building as per instructions, following the step-by-step process until completion. 1. Place 1x1 bricks on the triangular slopes from step 49.4, with vertical bars at the front.
2. Position two light gray 2x2 corner tiles next to each other, covering studs from previous steps.
3. Attach a light gray 7x3 ladder with clips to the horizontal handlebar from step 52.
4. Create rectangles at the top: a 16x16 square for the bridge and an 8x7 rectangle for the helicopter landing pad raised by one plate.
5. Set aside the ship and assemble the removable bridge.
6. Attach components to form the front and back of the bridge as per steps 55-62.
7. Add the windows to the bridge as per steps 70-78.
8. Place chairs, slopes, and accessories on the bridge as per steps 79-80. 1. Repeat steps 70.1-70.4 to create another bridge window and attach it to the radar slope. This is the bridge on the port side of the ship.
2. Rotate the bridge 90 degrees to the left so the port window is at the back. Place a light gray 1x2x3 tall slope two studs to the left of the back chair, sloping down towards the back.
3. Close up the bridge by finding two white 1x3x4 doors. Place the left door to the left of the previous piece and the other door symmetrically in front of the first door. Find two dark gray 1x2 grille tiles, a black 2x6 plate, and a light blue 1x4 tile with studs at the ends.
4. Place the 2x6 plate vertically long in front of you. Place a grille tile horizontally long on the back row of studs on the previous piece. Place the other grille horizontally long in the front row of the 2x6 plate. Place the 1x4 tile with studs on the ends vertically long between the last two pieces, on top of the doors.
5. Place the bridge on top of the 16x16 square on the ship's deck, aligning the bridge doors at the left. There should be two studs extending onto the helicopter pad.
6. Set the ship's bow aside and build the roof by placing a black 4x8 plate with two angled corners horizontally long. Add two orange 6x6 angled corner plates on top, symmetrical with the angles aligned.
7. Rotate the roof 180 degrees, add a black 8x8 plate centered horizontally, and place two black 4x8 plates with angled corners vertically long on each side.
8. Add two orange 2x2 triangular tiles on each side of the roof, followed by two orange 2x6 tiles and two orange 2x2 triangular tiles placed on the front and back rows of the roof.
9. Place a white 2x2 slope and a 1x4 half cylinder tile on the roof, then rotate it 90 degrees to the right. Align the roof with the left edges of the bridge. 1. Attach clips behind the ship on both sides to join hull sections. Hinge bars down to touch the ship's hull. Repeat on the front side symmetrically.
2. Open Bag 8, Group 23: Stack two orange 1x2x2 bricks with stickers on top of those without stickers. Place tiles and handlebars on the ship's front and back rows.
3. Place black 1x2 tiles and light blue 1x6 tiles on low walls and decks.
4. Insert Technic pins and supports on the deck near the bridge. Repeat symmetrically on the ship's front.
5. Add bricks, plates, and tiles on top of tall bricks and supports.
6. Build mast assembly with lights and equipment. Attach to the ship.
7. Construct ship's color scheme stripes using triangular tiles.
8. Lay tiles and handlebars on the ship's front row symmetrically. Repeat on the other side.
9. Open Bag 9, Group 27: Build the crane base and attach it to the ship.
10. Place plates, slopes, and tiles on the crane base and decks.
11. Insert a yellow axle into the crane base to allow rotation.
12. Place slopes and a curved slope on the moon pool walls. 1. Place a light gray 1x2 plate with a 1x4 row of studs hanging down on the left end of the moon pool.
2. Add a dark gray 1x12 plate vertically centered over the previous pieces.
3. Place an orange 1x2 tile and two orange 1x6 tiles vertically, centered on the previous pieces, extending into the low wall.
4. Build hatches for the moon pool using specific plates, tiles, and circular tiles as described.
5. Construct the crane using lift-arms, axles, and connectors as instructed.
6. Attach the crane arm, winch, and hook to complete the crane assembly.
7. Work on the stern of the ship by stacking white 2x2 bricks and adding tiles and handlebar tiles as directed.
8. Complete the ship by adding plates and a tile for storing diving gear.
9. Your Arctic Explorer Ship is finished. Thank you for building this set! </s> |
<s>[INST] Generate LEGO instructions for building the 40478 Mini Disney Castle set to celebrate the Walt Disney World® Resort’s 50th anniversary. The set includes a miniature Cinderella Castle with pearlized golden tower tops, opalescent blue rooftop cones, and a vintage-style Mickey Mouse minifigure. The display piece measures over 8 in. (21 cm) high, 5.5 in. (14 cm) wide, and 5.5 in. (13 cm) deep, suitable for home or office decoration. The box features images of the castle from different angles and dimensions, with a total of 567 pieces and 157 building steps. [/INST] 1. **Mickey Mouse Minifigure:**
- Place head onto torso, then torso onto legs.
2. **Mini Disney Castle - Group 1:**
- Place black 6x6 rounded corner plate.
- Add black 1x4 tile and black 4x4 rounded corner tile.
- Attach black 6x6 plate and black 1x6 tile.
- Add black 6x6 rounded corner plate, black 1x6 tile, black 4x4 macaroni tile, white circular plates, and triangular tiles.
- Place black 2x10 and 2x8 plates.
- Add black 6x6 rounded corner plates.
- Attach black 4x4 macaroni tiles and 1x4 tiles.
- Place black 6x6 plate underneath the tiles.
3. **Mini Disney Castle - Group 2:**
- Build drawbridge using black 2x4 and 2x3 plates, and gold 1x2 ingot tile.
- Add white plates, triangle tiles, and circular plates.
- Place white circular plates and tiles to form tower bases.
- Attach black bricks and tiles to create castle features.
- Place circular plates and tiles to complete the base.
4. **Mini Disney Castle - Group 3:**
- Place red and blue circular tiles, red and blue bricks, and clear tile with Cinderella slipper pattern.
- Add micro-figures and skeleton arms to represent castle visitors.
- Place yellow, light gray, and white bricks to continue building towers.
5. **Mini Disney Castle - Group 4:**
- Add black bricks and plates to enhance tower structures.
- Attach light gray bricks, arch bricks, and decorative tiles to the build.
6. **Mini Disney Castle - Group 5:**
- Continue building up outer walls with light gray bricks and circular bricks.
- Add quarter circle and half circular bricks to create tower details. 1. Stack a 2x2 brick and two circular bricks on the three leftmost pieces. Place circular bricks on the back wall from step 16.
2. Place a light gray 1x2 brick and a light gray 2x2 corner brick. Align them on the far right 2x2 brick.
3. Place two light gray 1x1 round bricks, a 2x2 circular brick, and a 1x2 half circular brick. Align the pieces as described.
4. Connect five 1x2 hinge bases with five white 1x2 hinge plates. Place them as instructed.
5. Place two light gray 2x2 corner pieces, two light gray 2x3 bricks, and two light gray 1x1 quarter circle tiles.
6. Connect skeleton arms with the blue 1x1 brick with a vertical bar from step 18.
7. Find four white 1x1 plates, four gold 1x1 plates, four dark gray 4x4 45 degree wedge plates, and one dark gray 1x4 plate. Place them accordingly.
8. Place a light gray 2x2 tile, a blue 1x2 slope tile, and a light gray 1x2 jumper plate.
9. Place a dark gray 4x6 plate in front of the 1x4 plate from step 34.
10. Place a light gray 2x3 plate horizontally long. Find a light gray 1x3 tile and a light gray 2x3 tile. Place them as instructed.
11. Attach walls following the steps provided.
12. Find a light gray 1x3 plate with two studs on top. Place it as instructed.
13. Attach walls as described.
14. Find five light gray 1x1 round tiles with an upwards bar on top. Place them upside down as instructed.
15. Find a light gray 1x3 tile and a white 1x1 plate with a stud. Place them as directed.
16. Continue building the walls with the steps provided.
17. Build the top of a tower with the specified pieces.
18. Attach the tower to the castle using a white 2x3 plate with a handlebar.
19. Continue building the walls according to the instructions.
20. Start building the base of the main keep with the specified pieces.
21. Find a light gray 1x2 tile, two light gray 1x2 jumper plates, and two light gray 2x2 circular tiles with a single stud. Place them as directed.
22. Continue building the base of the main keep following the steps provided. 1. Place a 2x2 brick on top of another 2x2 brick. Find a 1x2x2 tall white brick with four studs on one side and a 1x2 white plate. Position the tall brick vertically to the left of the previous pieces, with the studs on the left side. Place the plate vertically on top of the previous piece to form a 2x5 rectangle with the top right studs elevated by one plate.
2. Locate a 1x2 white plate, a 1x1 white plate, and two light gray 2x2 angled corner plates. Attach the 1x1 plate to the front stud of the previous piece. Place one corner plate behind it, forming a J shape, and the other to the right, forming an H shape. Add a 1x2 plate in front with a one-stud gap from the 1x1 plate.
3. Find two clear 1x1 tiles and a white 1x1 plate with two side studs. Place the tiles on the side studs of the plate. Insert this piece into the gap left in the previous step.
4. Gather a 1x1 brick, a 1x2 brick, a 2x2 cylinder brick with holes, a 1x3 brick, and a 1x2 light gray brick with two side studs. Assemble the bricks as follows to build the second level of the keep. Set aside the castle for later.
5. Locate a 2x3 white plate and place it in front of you horizontally.
6. Find two 2x2 white tiles with studs on top. Attach them to the previous piece in a specific arrangement to extend the build.
7. Use a 2x2 white plate with side studs to continue building the structure.
8. Add a 1x2 plate, three gold 1x2 jumper plates, and a light gray 1x1 plate to expand the build further.
9. Discover a red 1x2 plate and place it on the existing structure.
10. Continue building with a white 2x4 tile and a blue 1x2 triple slope.
11. Progress with more detailed steps to complete the castle keep and walls.
12. Finish the construction with a railing around the tower base and complete the build of the tall curved wall under the tower.
13. Conclude the build with a detailed railing around the tower base and additional elements to complete the structure. 1. Place a corner plate to the right of the cylindrical tower base, one stud to the front. Add tiles to the top of the keep and insert the plate with side studs.
2. Place two dark blue 1x3 plates horizontally on top of the keep.
3. Create a balcony using two gold 1x1 plates and a white 1x2 wall panel attached to the front half cylinder.
4. Add details to the base, including arched windows, towers, and blue roofs.
5. Construct gold towers with spires using circular plates, unicorn horns, and candles.
6. Attach the towers to the base of the arched window.
7. Add windows to the castle walls and create rooms with blue roof slopes.
8. Build a wall for the keep using white plates and tiles.
9. Create a little room on the side of the wall using various white and gold pieces.
10. Attach the wall to the left side of the keep on the castle.
11. Detail the top of the keep with plates and tiles, and build gold tower tops.
12. Build a clock tower over the gate using various gray and gold pieces.
13. Construct round rooms for the castle towers using gold and light gray pieces.
14. Place the round rooms on the towers of the castle.
15. Detail the back towers of the castle with light gray and gold circular plates, cones, tiles, and plates. 1. Attach a white circular tile with a hole onto a circular brick, followed by an inverted short cone. Place this assembly on the front left tower of the castle. Repeat for the front right tower.
2. Stack three white 2x2 circular bricks with vertical grooves for the tallest tower.
3. Stack a light gray 2x2 circular tile with a stud, a gold 2x2 circular plate, and a black 1x1 brick with studs on all sides for the next tower section.
4. Add a gold 1x1 cone, a gold 2x2x2 cone, and a ski pole on top of the previous tower section.
5. Attach a white 1x1 pyramid tile and a white 1x1 plate with a ring as a side stud onto the tower.
6. Place a gold 1x1 cone and a gold unicorn horn on top of the ring from the previous step.
7. Attach the tallest tower to the castle base next to the pyramid roof.
8. Rotate the castle, ensuring the drawbridge is at the front. The Mini Disney Castle is now complete. Great job! Thank you for building this set. </s> |
<s>[INST] Generate LEGO instructions for building Mia's Magic Tricks set, featuring Mia practicing magic tricks with cards, a wand, flowers, a bunny, and a top hat. Construct a stage for her performance and create a magic cabinet for the bunny to disappear into. The set includes Mia minifigure. [/INST] Build Mia mini-doll with magic wand. Give Rabbit bow. Construct table: 2x2 plate, 2x2 cylinder, 4x4 round plate, 2x1 tile with flowers. Create curtain: 8x2 plate, tall 2x1 pieces, f2x2 with bracier, 2x1 slope with buttons. Make disappearing box: 4x4 frame, 4x1 pieces, fs2x1, 4x1 with horizontal slot. Make part: f6x2, fs6x1, f2x1 with prongs, f2x1 with cornice, f2x2 with handle. Attach part to frame. Add decorations. Create gates: 2x1 with clasp, 1x1 with clasp and handle, f2x1, 1x1 wedge. Assemble gates. Place Rabbit inside the disappearing box, pull handle, open gates. Task complete! </s> |
<s>[INST] Generate LEGO instructions for building the 8158 Speed Racer VS Snake Oiler set, featuring Speed Racer's Mach 5 and Snake's car from the Casa Cristo Classic cross-country road rally. [/INST] Bag 1: Speed Racer:
1. Place 2 f6x1 horizontally on the table, spaced 2 rows apart.
2. Add an f8x1 vertically over the rightmost buttons of the f6x1 pieces.
3. Put a 4x1 in the middle of the f8x1, then add 2 4x1 horizontally to the left and 2 f4x1 on top.
4. Attach 2 2x2 lip pieces to the front and back of the f6x1 pieces.
5. Add a flat 3-button corner to the left of the front lip and repeat at the back.
6. Place a flat 2x1 between the f6x1 pieces and add a f4x2 vertically to the left.
7. Add 2 2x1 vertically on the right edge.
8. Put a 3x2/2x2 step piece to the left in the middle and set aside.
9. Build a structure with f8x6 and seats.
10. Add details like corners, hood, and wheels.
11. Connect the assembled parts to complete the car.
Bag 2: Snake Oiler's Car:
1. Lay 2 f8x1 pieces horizontally on the table, spaced 2 buttons apart.
2. Connect them with a flat 8x1 piece in the middle.
3. Add elements like 4x1 pieces, f4x2, and f6x1 to build the structure.
4. Attach lip pieces and additional details to the car.
5. Construct another part with f8x6 and seats.
6. Add steering wheel and finishing touches.
7. Install wheels and driver to complete the car. </s> |
<s>[INST] Generate LEGO instructions for building the LEGO Technic Dump Truck (42147) set, designed by Alex Charbonneau and tested by Natalie Charbonneau. This set is ideal for children aged 7 and up who enjoy construction site themes. The set includes instructions to build a dump truck and an excavator for versatile play. The dump truck measures over 3 inches high, 5.5 inches long, and 2 inches wide. The set introduces young builders to engineering concepts through realistic mechanisms. The box features images of the dump truck and excavator models to provide visual context. The dump truck build consists of 90 building steps, while the excavator build requires 73 steps. [/INST] 1. Begin by assembling the chassis of the truck:
a. Attach dark gray 3x3 L-shaped thin lift-arm and two light gray 3L axles.
b. Add another dark gray 3x3 L-shaped lift-arm on top.
c. Insert a blue 3L pin and a light gray 3x2 T-shaped thick lift-arm.
d. Place a dark gray 9L thick lift-arm horizontally.
2. Move on to building the headlight assembly:
a. Attach light gray 1L pins and a dark gray 2x2 T-shaped thick lift-arm.
b. Add transparent clear 1x1 round tiles.
c. Insert a black 6L axle and a light gray thin bush.
3. Next, construct the steering mechanism for the front wheels:
a. Attach light gray 3L axle and a connector with a perpendicular pin-hole.
b. Add light gray 2L pin and a dark gray perpendicular axle and pin connector.
c. Place light gray axle connectors and lift-arms with pins.
4. Build the back of the chassis:
a. Attach dark gray 9L lift-arm and tan 3L pin.
b. Add a yellow 5L axle and a light gray 3L thin lift-arm.
c. Insert black pins and a black 3L thick lift-arm.
5. Continue building the chassis:
a. Attach dark gray 9L thick lift-arm for the dump bucket hinge.
b. Add dark gray 1L lift-arm and tan 3L pins for the back wheels.
c. Insert dark gray 2L thick lift-arm and light gray thin bush for taillights.
6. Construct the cab of the truck:
a. Attach black pins and lift-arms with pin-holes and axle-holes.
b. Add dark gray axle connectors and blue axle/pin combos.
c. Place yellow 4x2 L-shaped lift-arm and blue axle/pin combos for assembly.
7. Finish by adding the steering gear:
a. Attach light gray 3L axle and a black 12 tooth gear for steering.
b. Add yellow 3L thick lift-arms, dark gray 1L thick lift-arm, blue 3L pin, and black 2L pins.
These simplified instructions should help you build the LEGO truck efficiently. 1. Place lift-arms horizontally long, attach pins as follows: black pins in first and third holes, blue pin in middle hole extending 1L each way.
2. Attach another lift-arm behind, offset one hole to the left. Connect 1L lift-arm to exposed pin at front.
3. Attach back right pin to L-shaped lift-arm.
4. Insert light gray 3L axles and bushes into connector, place assembly into front far left pin-hole.
5. Place yellow 3L thick lift-arms, L-shaped lift-arm, and pins as directed.
6. Attach assembly to the truck, aligning pins accordingly.
7. Insert black axle/pin combo into bottom right axle-hole of previous assembly.
8. Assemble front bumper with yellow lift-arm and pins.
9. Attach bumper assembly to left of the truck.
10. Build first door using yellow lift-arm, red pins, and plate.
11. Attach door to the truck.
12. Repeat steps 61-63 for the second door.
13. Attach second door to the truck.
14. Assemble parts for the dump bed hinge.
15. Connect dump bed to hinge assembly.
16. Attach lift-arm to dump bed for rotation mechanism.
17. Assemble parts for bed-raising mechanism.
18. Connect mechanism to dump bed and truck.
19. Complete the dump bed with lift-arm and pins.
20. Attach wheels to the truck.
21. Turn gear to steer and raise/lower the bed. </s> |
<s>[INST] Generate LEGO instructions for set 60391 Construction Trucks and Wrecking Ball Crane. The set includes a transporter truck, wrecking ball crane, dump truck, and derelict house, along with 3 worker minifigures and various accessories for imaginative play. The build consists of 235 pieces and is designed for kids aged 4 and up. Instructions are divided into four bags labeled 1 through 4, with an additional bag containing larger pieces. [/INST] Building Instructions (Bag 1, Book 1):
Group 1 — Construction worker minifigure
1. Assemble the construction worker Minifigure using the provided parts.
2. Insert the walkie-talkie into the minifigure's hand.
Group 2 — Car base
3. Place the light blue brick with walls and pegs as instructed.
4. Add the yellow and black bricks and slopes following the given arrangement.
5. Attach the remaining yellow bricks and inverted slope bricks.
6. Place the red plate and white bricks accordingly.
7. Add the black railing plates and yellow plates.
Group 3 — Windshield
8. Assemble the windshield and cockpit parts as directed.
9. Attach the cockpit to the car base.
Group 4 — Car details
10. Place the transparent orange cones and black megaphones.
11. Attach the black ladders to the designated bars.
12. Add the grill, lights, and front details to the car.
Group 5 — Wheels
13. Insert the pegs into the wheels and attach them to the car base.
Congratulations, you have finished building the transporter car! Let's move on to the crane now.
Building Instructions (Bag 2, Book 2):
Group 6 — Construction worker minifigure
1. Assemble the construction worker Minifigure using the provided parts.
2. Attach the crowbar to the minifigure.
Group 7 — Car base
3. Set up the crane base using the black brick, plates, and tile provided.
4. Add the ridged bricks and grill tiles.
5. Place the light blue curves and transparent blue tile.
Group 8 — Cockpit and crane
6. Assemble the cockpit and crane parts according to the instructions.
7. Attach the crane to the windshield section.
Congratulations, your crane vehicle is complete! Let's move on to the dump truck.
Building Instructions (Bag 3, Book 3):
Group 10 — Construction worker minifigure
1. Assemble the construction worker minifigure using the provided parts.
2. Insert the shovel into the minifigure's hand.
Group 11 — Hazard zone
3. Set up the hazard zone using the green plate, bricks, and cones.
Group 12 — Car frame
4. Arrange the car frame with the dark grey and yellow bricks as directed.
5. Place the hinge connectors and curved bricks accordingly.
Congratulations on completing the dump truck! 1. Place a windshield on the left side, outer wall facing left, above the 6 vertical studs. Add a 1x2 sloped tile to the right, sloping down from left to right.
2. Add a white steering wheel to the right of the sloped tile, facing right.
3. Add two trans-light blue 1x2x3 panels on the right side of the windshield.
4. Add two yellow 1x2x3 slopes symmetrically to the right of the panels.
5. Place a yellow 2x6 plate vertically on the left side above the windshield, covering half of it. Add two yellow 1x2 tiles to cover the other half and the slope.
6. Place two trans-orange cones in the front and back studs on the left.
7. Add two trans-red 1x2 plates vertically on both ends of the car frame.
8. Attach a large dump truck container to the right side of the car using hinge connectors.
9. Insert cylinders into the tires to create wheels, ensuring the dented side of the cylinders faces the pegs on the truck for all wheels.
For Minifigure assembly:
1. Create a businesswoman Minifigure using black legs, black-suit torso, female head, and white hardhat with hair. Insert apartment blueprints into her hand.
For Base/spider assembly:
1. Place a 6x12 light grey plate horizontally. Add 2x6 brown tiles at the back and front, no overhang.
2. Stack a light grey 2x4 plate, tan 2x4 brick, and another light grey 2x4 plate horizontally.
3. Place masonry bricks and a tile on top, ensuring the print is oriented correctly.
4. Connect the built structure to the base and add additional layers symmetrically.
5. Add a black spider on top.
For Door assembly:
1. Insert a door into a door frame with a handle on the right. Place a 2x4 brick on top.
2. Insert the door into the center gap of the build.
For Light assembly:
1. Stack light grey plates and a dark grey brick horizontally. Add corner bricks and a tile on top.
2. Assemble a light fixture with a paint roller and trans-yellow cylinder.
3. Place the build next to the door.
For Number 3 assembly:
1. Stack plates and bricks horizontally. Add corner bricks and a brown brick with a circular tile numbered 3.
2. Place the build to the left of the door, ensuring the number 3 is facing forward. Add slopes to form a trapezoidal shape. </s> |
<s>[INST] Generate LEGO instructions for building a fire hovercraft set with the code 7944. [/INST] 1. Build minifigures: First minifigure in black suit with yellow crest and flames, two white hard/fire hats, glasses, smile. Second minifigure in black suit with orange glasses, no smile. Third minifigure without glasses, bushy eyebrows, black eyes, no smile.
2. Build hovercraft:
- Step 1: Place large hovercraft hull horizontally on table, attach 6 2x2 plates with technic connectors at front and back holes.
- Step 2: Add plates and quarter-circle pieces as instructed to form front and back of structure.
- Step 3: Continue adding 8x8 plates to front and back of structure.
- Step 4: Add white and black plates, create turntable, attach to structure.
- Step 5: Attach white and black plates, add black 2x4 plates between 2x2 plates.
- Step 6: Add plates, life preservers, and 4x1 plates as directed.
- Step 7: Add red curved bricks and a curved 2x4 with studs.
- Step 8-12: Add red bricks, curved slopes, tiles, flags, and stickers as directed.
- Step 13: Add grille tiles and create bench piece with plates.
- Step 14-15: Add red bricks and slopes as directed.
- Step 16: Build control panel and seat, attach to structure.
- Step 17-18: Add red bricks and window frames with glass.
- Step 19: Construct projector part and attach to structure.
- Step 20-22: Add slopes, bench pieces, steering wheels, and storage compartment.
- Step 23: Build storage compartment with tiles and stickers.
- Step 24: Make fire extinguishers, flashlight, and mount in storage compartment.
- Step 25: Build antenna part and mount on structure.
- Step 26: Place glass in cockpit piece and attach to structure.
- Step 27: Attach technic corner pieces and make projector parts for front and back.
- Step 28-29: Mount projectors on front and back, make water-cannon part.
3. Complete assembly: Attach water-cannon part to structure. Instructions:
1. Build two muzzles for cannons and attach them to the front, cone to the left.
2. Create a light using a white 1x1 plate with vertical clasp on a transparent yellow 1x1 plate. Attach it between the muzzles.
3. Add a red 2x2 hinge vertically in the middle, and a white 1x2 hinge base on the left column of a 2x2 turntable.
4. Mount the cannon on the hinge base to allow for up and down movement.
5. Attach a steering wheel to the plate next to the seat.
6. Construct propellers using a technic axle, propeller, bushing, wheel, dish, and plate. Attach them symmetrically at the front and back.
7. Add domes to the propeller axles.
8. Build wheels using plates and connectors, then mount them underneath the structure.
9. Create wheel assemblies using plates, holders, wheels, and gears. Attach them to the structure.
10. Build engine parts and attach them to the axles for spinning motion.
11. Make a radar using lance pieces and dishes, and attach it to the structure.
12. Place axes, walkie talkie, and circular saw into clips inside the structure.
13. Apply remaining stickers to the sides of the hull with set number 7944.
14. Advertise other LEGO sets related to this one.
15. Enjoy your completed build! </s> |
<s>[INST] Generate LEGO instructions for building the 10211 Grand Emporium, a detailed 3-story department store with special building techniques and rare pieces. The set includes street scenes with citizens, a clothing department, housewares section, toy department, escalator, chandelier, rooftop billboard, and skylight. [/INST] Start by assembling the emporium using the following steps:
- Bag 1: Begin by creating a border on the front and left sides of the 32x32 base using 1x1 and 6x1 flat smooth pieces. Extend the border wider by adding various flat pieces in a specific sequence.
- Bag 2: Mark the floor layout for the first shop by adding specific flat pieces along the columns and rows to build the border and floor pattern.
- Bag 3: Continue by placing flat pieces to complete the floor pattern and fill in gaps with specific pieces.
- Bag 4: Build the floor of the upper left shop corner by following a specific sequence of placing flat pieces and squares.
- Bag 5: Fill the floor on the left lower side similar to the right upper part using specific flat pieces and squares.
- Bag 6: Add specific pieces to create a designated area with a circle-in-square piece in the floor pattern.
- Bag 7: Construct the upper middle section of the floor using specific pieces in a particular layout.
- Bag 8: Continue by building the inside border on row 10 with specific flat pieces.
- Bag 9: Start building the second story by adding specific pieces to continue the structure's border and layout.
- Bag 10: Proceed by building the second story in the back row using specific pieces in a particular order.
- Bag 11: Begin constructing the third story starting with the 10th row and continuing with specific pieces in the right-edge side.
- Bag 12: Continue building the third story in the back with specific pieces according to the previous story's pattern.
- Bag 13: Start the fourth story following the pattern of previous stories in the 10th row and on the right side.
- Bag 14: Build the fifth story by placing specific pieces in the 10th row and last column, as well as continuing around the box.
- Bag 15: Create a fitting room by assembling curtains and placing them in the designated gaps.
- Bag 16: Make stands for manikins and merchandise using specific pieces to position them correctly.
- Bag 17: Assemble a centerpiece table and exhibit for perfumes and jewelry using specific flat pieces and covers to display merchandise effectively. 1. Assemble the table with two trapezoid pieces, a circle piece, a cylinder piece, and a flat piece on top.
2. Place the table in the middle of the floor, spaced 4 buttons apart, horizontally.
3. Construct the back wall's second row with three flat pieces.
4. Add three vertical pieces to the right side of the back wall.
5. Build the inner side of the left wall with vertical and horizontal pieces.
6. Create the outer sides of the left and front walls using flat pieces with lips.
7. Place the tables on the floor, one on each side, with a 4-button space between them, horizontally. 1. Place 8x1 flat piece with lip and two columns next to it, followed by a curved colonnade and two more columns horizontally.
2. Add 8x1 flat piece with lip on front wall and a 2x1 flat piece with lip next to it from bag 12. Cover columns with 2x1 flat smooth pieces.
3. Place various flat pieces on railings, build third row of back and right walls, and add pieces according to bag 13.
4. Continue building walls and add pieces per bag 14.
5. Build outer sides of left and front walls as described in bag 15.
6. Build fifth row of back and right walls, including installing window and glass per bag 15.
7. Make columns for left and front walls and cover back and right walls as instructed in bags 16 and 17.
8. Build seventh row of back and right walls along with additional steps from bag 18.
9. Continue building walls and adding pieces following bag 19 and 20 instructions.
10. Make two tall columns, install them, and add windows to left and front walls as per bag 21.
11. Cover windows, add pieces to complete back and right walls, and extend the structure per bag 22.
12. Build escalator and steps for it with additional details from bag 26 and 26A.
13. Add final pieces to the structure based on bags 27 to 29. Condensed LEGO building instructions:
**Bag 9**
1. Build the back and right walls of the second story.
2. Place pieces as follows:
- Back wall: 6x1, 6x1, 8x1, 3x1
- Right wall: 6x1, 8x1, 8x1, 6x1, 8x1, 8x1
3. Position three round table bases in the center of the floor, covering two with hexagons.
**Bag 10**
1. Construct inner sides of the left and front walls.
2. Add pieces vertically and horizontally.
3. Place curved pieces and complete the walls.
**Bag 11**
1. Add a railing around the gap with specific placements of 1x1 and 2x1 pieces.
2. Place cylinders in the centers of two hexagons.
*Continue similar concise instructions for Bags 12 to 30.*
**Bag 31**
1. Build the roof.
**Bag 1**
1. Build the base using specific placements of flat pieces.
2. Create a platform structure.
*Continue concise instructions for Bags 2 to 4.*
**Bag 5**
1. Place benches on window pieces.
2. Install windows in the skylight hole, attaching them to the base. Concise Version:
1. Construct a square opening by placing four 2x1 slide pieces on the base.
2. Attach skylight frame pieces and cylinders as instructed.
3. Add arch pieces and flat pieces to the skylight.
4. Place curved pieces, slide pieces, and flat pieces to build the structure.
5. Create the sign-holding tower and add smooth pieces to it.
6. Build the sign with lights and a gift box.
7. Assemble the sign using flat pieces.
8. Complete the gift box and place it on the billboard.
9. Attach the window-washer crib to the structure.
That's it! Enjoy building! </s> |
<s>[INST] Generate LEGO instructions for building a model of the iconic Tower Bridge, complete with its iconic towers, a working drawbridge, and a red double-decker bus. [/INST] Book 1 - Bag 1: Large bag 1 contains instructions for building the bridge.
- Step 1: Place a 32x16 blue flat piece on the table to represent the Thames.
- Step 2: Attach a 6x1 piece with side holes vertically on the left edge, skipping the front five rows, and repeat on the right.
- Step 3: Add a 4x2 piece horizontally to the left of the previous piece, on the 8th and 9th rows. Include a 2x1 slide piece to the left and right, repeating symmetrically on the other side.
- Step 4: Place a 2x1 piece vertically on top of the previous part. Add curved 2x1 pieces on both sides, following the specified pattern.
Bag 2: This bag repeats to create two identical bridge parts. Instructions are to be duplicated for each part.
- Step 1: Start with an 8x2 vertical piece on the table.
- Continue adding pieces symmetrically to form the bridge structure.
- Finish by installing the railing and connecting the parts to complete the bridge.
Bag 3: Instructions for constructing the base of the tower are spread across bags 1-3.
- Step 1: Begin with a 32-16 "water" piece horizontally on the table.
- Follow the detailed steps to build up the tower base symmetrically on both sides.
Please let me know if you would like further simplification or details. **LEGO Building Instructions:**
1. **Assemble Wheel Base:**
- Place a six-hole wheel on the table with two holes in front, two in the back, and two at the sides.
- Insert longer connectors into the left and right-side holes.
- Stack another wheel on top.
- Add a wheel from a separate bag on top and another on the bottom.
- Insert connectors as follows:
- Front and left of the right-side connector.
- Back and right of the left-side connector.
- Attach an F 6x1 piece on the shorter connectors.
2. **Repeat Steps for Four Wheels:**
- Repeat the above steps to make four wheel bases.
- Position them on the corners of the structure, ensuring symmetry.
3. **Window Frames:**
- Insert panes into window frames.
- Arrange tall frames side by side in the middle of the front wall.
- Place short frames on the left wall and front and back ends.
4. **Repeat and Add Details:**
- Repeat the above steps symmetrically on the right side.
- Place additional window frames and decorative pieces as instructed.
5. **Complete Structure:**
- Continue following the steps provided in subsequent bags to build and add components to complete the structure.
By simplifying and condensing the instructions, the building process should be clearer and easier to follow. LEGO Building Instructions:
**Left Front Disk:**
1. Place a F 2x1 button on the left front disk.
2. Add a F 2x1 button on the back row of the same disk.
3. Repeat steps 1-2 on the other three disks.
4. Place a FS 2x1 vertically on the left edge of the left front disk.
5. Repeat step 4 on the right edge.
6. Add a FS 2x2 on the left edge of the left back disk.
7. Put a F 2x2 with one button on the right edge of the left back disk.
8. Repeat steps 6-7 on the right.
**Number 69:**
1. Stack two F 4x1 pieces to make four.
2. Place vertically on the front and back ends of the left and right walls.
3. Add a 1x1 piece behind the front left PP.
4. Repeat step 3 on the back left PP.
5. Continue with the remaining steps as per the original instructions.
**Bag 9 Number 70:**
1. Place a 2x1 lip piece vertically on the front wall.
2. Add a 1x1 piece to the right.
3. Continue with the remaining steps as per the original instructions.
**Bag 10 Number 71:**
1. Put a 1x1 with two side buttons on the front end of the left wall.
2. Add a 1x1 with a side button to the back.
3. Continue with the remaining steps as per the original instructions.
**Bag 11 Number 72:**
1. Stack two F 3x1 pieces to make four.
2. Place them vertically at the ends of the left and right walls.
3. Stack two 1x1 pieces in the middle of the front wall.
4. Continue with the remaining steps as per the original instructions.
**Bag 12 Number 73:**
1. Install windowpanes into the frames.
2. Add shorter windows horizontally to the left of the PP.
3. Continue with the remaining steps as per the original instructions.
**Bag 13 Number 74:**
1. Stack three 1x1 pieces to make four.
2. Place two at the left and right ends of the front wall.
3. Continue with the remaining steps as per the original instructions.
**Bag 14 Number 75:**
1. Add a 3x1 vertically on each end of the left and right walls.
2. Place a 3x1 horizontally in the middle of the front wall.
3. Continue with the remaining steps as per the original instructions.
**Bag 15 Number 76:**
1. Stack two F 6x1 horizontally on the table.
2. Install windowpanes and other pieces as described in the original instructions.
**Number 77:**
1. Add F 6x1 vertically to the front end of the left wall.
2. Continue with the remaining steps as per the original instructions.
**Number 78:**
1. Place a F 2x1 with one button vertically on the front end of the left wall.
2. Continue with the remaining steps as per the original instructions.
**Number 79:**
1. Make a part by stacking pieces as described.
2. Continue with the remaining steps as per the original instructions.
**Number 80:**
1. Make a part by stacking pieces as described.
2. Continue with the remaining steps as per the original instructions.
**Number 81:**
1. Connect the towers to the bridge from the left and right sides.
**Book 3 Large Bag 4:**
Repeat instructions to make two tower roofs.
**Bag 1:**
1. Place a F 8x6 horizontally on the table.
2. Stack five 2x2 pieces and put them in the middle.
3. Continue with the remaining steps as per the original instructions.
**Bag 2:**
Repeat instructions to complete the tower roofs.
**Bag 3:**
1. Make the gables as described.
2. Continue with the remaining steps to finish the tower construction. LEGO Building Instructions - Simplified Version
**Topping Part:**
1. Place a 4x2 hor on the table.
2. Add a 2x1 with cornice hor on the left front.
3. Attach another cornice piece on the right.
4. Place two cornice pieces on the back.
5. Add four 2x1 pieces with one button ver on top.
6. Put two cones on the middle pieces, wide ends down.
7. Attach a 2x1 with one button hor on top of the cones.
8. Place a candlestick on top and two on the sides.
9. Repeat for two roofs.
**Corner Turrets' Foundations:**
1. Place a 4x2 with 4x1 wings ver on the table.
2. Add a 1x1 with side buttons on the left front.
3. Attach another piece on the right.
4. Continue building up the corner turrets.
**Little Spires for Turrets:**
1. Place a twelve-button F disk on the table.
2. Add a 2x2 tall cone and a one-button tall cone.
3. Continue building the spires and attach them to the turrets.
**Bottom Pavement:**
1. Build the outer sides using specified pieces.
**Chains:**
1. Construct chains as per instructions using sled pieces and clasps.
**Vehicle Building:**
1. Follow the steps to build a van, car, truck, and double-deck bus.
Enjoy building this LEGO set! Thank you for your patience and creativity! </s> |
<s>[INST] Generate LEGO instructions for a 4x4 Off-Roader Adventures playset (60387) featuring a 4x4 vehicle, 2 mountain bikes, a tent, campfire, and accessories. Set includes 252 pieces, 94 steps, and is for ages 6+. Bag 1 for minifigures, tent, and terrain; Bags 2 and 3 for the truck. Use provided terms for building guidance. [/INST] Building Instructions (Bag 1, Book 1):
1. Female Minifigure and Bicycle:
- Assemble female minifigure with camera.
- Attach camera flash to the camera.
- Give her a white helmet for safety.
- Assemble orange bicycle frame with tires and cylinders.
- Attach wheels to the bicycle.
- Place the minifigure on the bicycle to ride.
2. Male Minifigure and Bicycle:
- Assemble male minifigure with accessories.
- Give him a dark blue helmet for safety.
- Assemble dark blue bike frame with tires and cylinders.
- Attach wheels to the bicycle.
- Place the minifigure on the bicycle to ride.
3. Tent and Camp Fire:
- Build the tent structure with plates and tiles.
- Add light orange plates and ingot tiles.
- Complete the tent with double-sided tiles.
- Create a campfire using plates and a candle.
- Place a shovel and frying pan in front of the tent.
4. Tent:
- Build two sleeping bags for the tent.
5. Tent:
- Build another sleeping bag for the tent.
6. Tent:
- Construct the tent canopy with double-sided tiles.
- Add a campfire in front of the tent.
- Place a shovel and frying pan in front of the tent.
7. Terrain:
- Build terrain structure with slope bricks and plates.
8. Terrain:
- Continue building terrain with slope bricks and plates.
Building Instructions (Bag 2, Book 2):
9. Car:
- Build car body with plates and bricks.
- Add details like circular bricks and a ridged brick.
10. Car:
- Continue building car body with plates and bricks.
- Add a ridged short brick for details.
11. Car:
- Build car body with plates, tiles, and bricks.
- Add hinges for details.
- Complete the car body with additional bricks and tiles.
12. Car:
- Finish car body with plates, bricks, and tiles.
- Add circular bricks and plates for details.
13. Car:
- Add final details to the car body with plates and bricks.
- Place a steering wheel and corner bricks for finishing touches. 1. Place a 1x4 brick with studs facing you and a 1x2 brick to the left, repeating for the back row.
2. Add 2 black 1x3 plates horizontally to the left of 1x2 bricks with side studs.
3. Attach 2 dark blue 1x6 plates without overhang to the left of the steering wheel, adding red 1x2 plates.
4. Add a light grey circular 2x2 brick with 2 red 1x1 circular plates between the red 1x2 plates.
5. Place 2 dark blue 1x6 plates and 2 light grey 1x2 plates with hooks, followed by white tiles and plates for the next steps.
6. Attach 1 white 3x6 plate and 1 transparent red 1x2 plate vertically, then add red and white plates and tiles accordingly.
7. Complete the headlights with specific color and tile placements.
8. Place the headlight build under the hood facing down, then add a black bar and a black 1x4 tile.
9. Add orange tiles and angle plates with sticker placements.
10. Place a clear windshield piece and a white 2x6 tile, followed by adding L-shaped technic plates and red pegs.
11. Insert rubber bands for suspension and assemble wheels with technic clips and pegs.
12. Connect the wheels to the technic plates to complete the build. </s> |
<s>[INST] Generate LEGO instructions for constructing the 10232 Palace Cinema set. The set includes a detailed lobby with a concession stand and ticket area, a grand staircase leading to a theater with a large screen, movie projector, and reclining chairs for 6 minifigures. Features include a sidewalk of the stars, brick-built entrance doors, posters, sign frontage, a tower with spires, and rooftop decorations. The set also includes 6 minifigures. [/INST] Book 1 Limo bags (1-3):
Limo Bag 1
Number 1:
1. Place a F 16x2 hor on the table.
2. Add a F 6x1 ver on the left end in the middle.
Number 2:
1. Repeat step 2 on the right.
2. Add a F 3x2 hor to the left.
3. Add a F 4x1 with two buttons ver to the left in the middle.
4. Add a F 6x6 to the left in the middle.
5. Add a F 4x1 ver to the left in the middle.
6. Add a F 3x2 hor to the left.
Number 3:
1. Flip over without changing left and right.
2. Place a F 6x1 hor on the front edge in the middle.
3. Repeat at the back.
4. Put two F 2x1 pieces ver on the left edge, one on the front and one at the back.
5. Repeat on the right.
Number 4:
1. Flip over without changing right and left.
2. Put a 6x1 arch hor at the back on the left, bridging the gap.
3. Add a 1x1 to the right.
4. Add a 1x1 door to the right, hor, with the button on the left and the door on the back.
5. Place a 6x1 arch hor to the right.
6. Add a 4x1 with side buttons ver to the front, side buttons to the right.
Number 5:
1. Place two 3x1 pieces hor side by side to the left.
2. Add two 1x1 slide pieces to the left, one to the back and one to the front, slides to the left.
3. Skip one column to the left and put a 4x1 bench piece ver, seat to the right, skipping the first row.
4. Skip three columns to the left and place two 4x1 pieces hor side by side in the middle.
5. Put two 1x1 pieces next to the rightmost buttons of the two PPs, one to the front and one to the back.
Bag 2:
Number 6:
1. Place a F 2x1 ver on top of the front 1x1 and on the rightmost button of the front 4x1.
2. Create a part by putting a grate piece upright hor on the two side buttons of a 2x1 corner piece with two side buttons. Place this part to the back of the PP, ver, with the grate to the right.
3. Add a 4x1 with side buttons ver on the left edge, side buttons to the left, skipping the front button.
4. Place a 6x1 arch piece hor to the front and to the right.
5. Place a 1x1 to the right.
6. Add a door to the right, symm to the back door.
7. Put a 6x1 arch hor to the right.
Number 7:
1. Create a part by placing a F 6x2 hor on the table.
2. Put a FS 1x1 disk on the leftmost back button.
3. Place a 2x1 stair piece hor to the right, top to the right.
4. Repeat steps 2-3 symm on the right.
5. Put a 1x1 clasp on the leftmost front button, ver.
6. Repeat on the right.
7. Add a FS 4x1 hor in between.
8. Insert a stick into the clasps.
9. Install this part upright hor on the left wall of your structure, stick on the bottom, to the left.
Number 8:
1. Create a part by placing a F 6x2 hor on the table.
2. Put a 1x1 button on the leftmost back button.
3. Place a 1x1 button to the right.
4. Repeat steps 2-3 on the right.
5. Add a FS 2x1 hor in between.
6. Repeat steps 5-8 of number 7 (the 1x1 clasps, the flat smooth 4x1 piece, and the stick).
7. Install upright hor on the right wall, to the right, stick on the bottom.
Number 9:
1. Place a FS 4x2 hor on the left end of the front edge and on the second row.
2. Add a FS 4x1 hor to the right on the front edge.
3. Repeat steps 1-2 symm on the back.
4. Put a F 2x2 washboard piece hor on the left end in the middle, curve overhanging on the left.
5. Add a F 2x2 to the right.
6. Place a F 2x1 ver in the middle of the right end, skipping the rightmost column.
7. Put a F 6x2 ver to the left.
8. Add a F 4x1 ver on top of the PP, in the middle of the right column.
Bag 3:
Number 10:
1. Put a FS 2x1 ver to the left in the middle.
2. Place a FS 1x1 on the front end of the right edge.
3. Add a 4x1 phone receiver piece hor to the left.
4. Put a FS 1x1 to the left.
5. Repeat steps 2-4 on the back.
6. Add a F 4x1 ver on the right edge in the middle.
7. Place a steering wheel piece ver, wheel to the right, to the front of the grate piece.
Number 11:
1. Put a S 4x2 ramp piece ver on the right edge, slide to the right, in the middle.
2. Add a FS 4x1 ver to the left.
3. Put two S 1x1 wedges to the left, one at the back and one at the front, slides to the left.
4. Place a 2x2 stepped piece with side buttons on the left edge, side buttons to the front.
5. Add another such piece to the right, side buttons to the back.
Number 12:
1. Place two F 2x1 pieces from a sep bag ver on tops of the two PPs, on their lower steps.
2. Create a part by putting a F 4x1 hor on the table. Place a F 2x1 hor on top, in the middle.
3. Add a F 1x1 with the roll to the left, roll to the left.
4. Put a F S 1. Place a 2x1 bench piece horizontally to the right with a wall to the back.
2. Place another 2x1 bench piece horizontally to the front with a wall to the back on the lower level.
3. Add another bench piece to the front and right, horizontally, with a wall to the back on the lower level.
4. Put a 2x1 piece horizontally to the right of the first bench on the back wall.
5. Place a 6x1 piece vertically to the right and front.
6. Add a 6x1 piece vertically to the front.
7. Repeat steps 5 and 6.
8. Place a 1x1 piece to the left of the front button of the PP.
9. Add a 2x1 piece vertically to the back.
10. Put a 2x1 piece horizontally to the left of the back button of the PP.
11. Move to the left end of the front wall and place a 2x1 piece vertically on top of the upright-slide piece.
12. Add a 4x1 piece vertically to the back on the wall.
13. Repeat steps 11 and 12.
14. Place a 1x1 wedge to the left of the right 2x1 piece on the front row.
15. Stack two 1x1 buttons and place them to the left.
16. Stack two 1x1 buttons from a separate bag and place them to the left.
17. Add two 2x1 pieces on top of the first two.
18. Place two 6x1 pieces horizontally, one at the front and one at the back.
19. Add a 2x2 lip piece underneath, with the lip to the front, on the left edge.
20. Repeat the process on the right side.
21. Install this part horizontally inside the left back corner as it is.
22. Mount three FS4x1 pieces upright onto the side buttons of the 2x1s with side buttons on the left wall.
23. Take a 4x1 bench piece, hold it upright horizontally, with the wall to the top and front, and mount it on the two side buttons on the front wall.
24. Repeat the process with the other 4x1 bench piece. Condensed LEGO building instructions:
Step 13: Make three parts with two cylinders each. Stack them on top of the 2x2 piece on the left wall and place the third on the front right button of the 2x2 piece.
Step 14: Place a 1x1 with a side button to the left and another 1x1 to the left. Continue by adding pieces to the front end of the left wall and assembling a part with a cornice on the table, following specific instructions for placement.
For additional steps, please provide specific details. Insert a stick into the two front clasps on the left wall. Bag 7. Number 14: 1. At the front end of the right wall, place a 2x1 horizontal piece. 2. Add a 1x1 piece behind its left button. 3. Attach an 8x1 vertical piece behind the right button. 4. Add another 8x1 vertical piece behind it. 5. Follow with a 6x1 vertical piece. 6. Place an 8x1 horizontal piece to the back and left. 7. Attach a 2x2 piece to the left, overhanging to the front. 8. Add a 6x1 horizontal piece next to it. 9. Continue with an 8x1 horizontal piece. 10. Put a 2x1 horizontal piece in front of the two leftmost buttons. 11. Insert remaining sticks into the clasps. 12. Place a F 6x4 vertical piece on top of the cylinders and the 2x1 stack. Number 15: 1. Create a seat for the mechanic by placing a F 2x1 piece with a handle on top of a F 2x2 disk. 2. Add a FS 2x1 piece to the free two buttons of the disk. 3. Insert the two clasps of a FS 2x2 piece with two clasps into the handle. 4. Install this structure on top of the 6x4 canopy, on the back two rows, skipping one column from the left towards the back. 5. Place a F 2x2 washer board piece, skipping one row to the front, so that the holed half-circle overhangs on the right. 6. At the left end of the back wall, put a 2x1 vertical piece. 7. Add a 1x1 piece to the right of its front button. 8. Include a 6x1 horizontal piece to the right of its back button. 9. Follow with an 8x1 horizontal piece. 10. Repeat steps 2-9. 11. Put a 2x1 vertical piece to the left of its two front buttons. Bag 8: Number 16: 1. Create stairs by placing a 2x2 lip piece on the table with the lip to the left. 2. Attach a F 4x1 vertical piece on the right column, overhanging on the front and back. 3. Add a 2x2 lip piece on the left two buttons of the first lip piece, with the lip to the left. 4. Repeat steps 2-3. 5. Put a F three-button corner piece on the first row, overhanging to the front, labeled D. 6. Add a F three-button corner piece to the back, labeled J. 7. Place three FS 4x1 pieces on top of the two F 4x1 pieces and on the top stair. 8. Install this structure on the right edge of the gap, on the lip, and resting on the right button of the tab on the back wall. 9. Place a 1x1 piece on the rearmost button of the tab. Number 17: 1. Stack four ribbed 2x1 pieces to make a window frame. 2. Repeat to create eight window frames. 3. Stack two 2x1 frames to make another window frame and insert the glass pane. 4. Repeat to make six such pieces. 5. Place ribbed stacks and windows alternately on the right and left walls, starting with the ribbed stacks. Bag 9: Number 18: 1. Stack two F 2x1 pieces horizontally on the table. 2. Add a 1x1 piece on the left and a 1x1 piece with a side button on the right, with the side button to the front. 3. Place a F 2x1 horizontal piece on top. 4. Add a 2x1 piece on top. 5. Install this structure at the front end of the left wall, on top of the 1x1 and 1x1 with the side button. 6. Repeat steps 1-5, with the side button on the left, and install at the left end of the front wall. Number 19: 1. Create an old-fashioned movie projector by placing a F 2x1/2x1 corner piece horizontally on the table, side buttons to the front. 2. Add a 2x1/2x1 piece horizontally with the end button on the bench back, the end button to the left, and the side buttons on the front and top. 3. Put a 1x1 button on the end button. 4. Attach a F 2x1 trapeze piece horizontally on the seat buttons of the bench, wider side to the back. 5. Place a grate piece horizontally on top of the trapeze. 6. Add a F 2x1 piece with one button upright, horizontally, on the two front side buttons. 7. Place a cone, wider end in, on the projector. 8. Put two steering wheels on the wider ends of the trapeze. 9. Insert the cone into the hole in the end of the washer board piece on the canopy. Number 20: 1. Stack two F 2x1 pieces from a separate bag and add a F 2x1 piece at the bottom. 2. Repeat to make four such parts. 3. Add a curved frame on top of each window and place one of these parts between each two frames, horizontally on the front wall and vertically on the left wall. Number 21: 1. Stack two F 3x1 pieces and add a F 2x1 and a F 1x1 underneath, side by side. 2. Repeat to make four such parts. 3. Put a F 3x1 piece horizontally at the right end of the front wall, with the 1x1 to the left. 4. Add another F 3x1 piece horizontally at the left end of the front wall, with the 1x1 to the right. 5. Place a F 3x1 piece vertically at the front end of the left wall, with the 1x1 to the back. 6. Add another F 3x1 piece vertically at the back end of the left wall, with the 1x1 to the front. 7. Put an etched 2x1 piece vertically at the front, with vertical etchings to the right. 8. Add an 8x1 piece vertically at the front. Bag 10: Number 22: 1. Place three 4x1 arches vertically over the frames on the left wall. 2. Place three 4x1 arches horizontally over the frames on the front wall. 3. Create a part by placing a 1x1 on a 2x1 **LEGO Building Instructions:**
**Front:**
1. Place a curved 2x1 horizontally to the right of the front button.
2. On the left back side, insert a 2x1 horizontally on the second row from the back, second and third columns from the left.
3. Add a 2x1 horizontally to the right.
4. Move to the right front side, insert a 2x1 vertically on the second and third rows from the front, second column from the right.
5. Place a 2x1 vertically to the back.
**Number 7:**
1. At the front end of the left wall, place a FS 6x1 horizontally to the front and right.
2. Add a FS 1x1 to the right.
3. Insert a FS 6x1 vertically to the front.
4. Put a FS 1x1 to the left, three spaces from the front.
5. Place a FS 2x1 horizontally to the back and left.
6. Add a F 2x2 circle-within-square piece to the back.
7. Insert a FS 2x1 vertically to the left.
8. Place a FS 1x1 to the left, at the back space.
9. Add a F 4x2 horizontally behind the circle-in-the-square, skipping the FS piece.
10. Insert a F 6x2 horizontally in the middle, overhanging towards the back.
11. Put a F 8x2 vertically to the right and front.
**Bag 3 Number 8:**
1. Construct a door and install it to open towards the front and left.
2. Place a 4x1 with side buttons underneath, buttons facing to the front.
3. Stack two F 4x1 pieces on top of the door.
4. Add four 1x1 pieces with side buttons on top, aligned side by side.
5. Place a FS 4x1 horizontally on top.
6. Attach a 1x1 button as a handle.
7. Lay the door horizontally over the side buttons on the 4x1 piece.
**Number 9:**
1. Add a FS 4x1 vertically on the left side of the door.
2. Install a 4x1 slide horizontally to the front and right.
3. Place a 2x1 slide horizontally to the right.
4. Add a 4x1 slide to the right.
5. Insert a FS 4x1 vertically at the top right side of the door.
6. On the right end of the back wall, put a F 1x1.
7. Add a FS 6x1 horizontally to the left.
8. Repeat these steps.
**Bag 4 Number 10:**
1. Place a 2x2 at the left end of the back wall.
2. Add a 2x1 vertically to the right.
3. Insert a FS 2x1 vertically in front of the 2x2 on the left wall.
4. Put a FS 6x1 vertically to the front.
5. Repeat these steps.
6. Add a 1x1 to the front.
7. Place a 1x1 with side button to the right.
8. Add a 1x1 cylinder to the right.
**Number 11:**
1. Place a F 2x1 vertically on the two PPs.
2. Add a F 1x1 to the front.
3. Repeat these steps symmetrically on the left side.
4. Place a FS 4x1 horizontally at the left end of the front side of the door.
5. Add a FS 6x1 horizontally to the right.
**Number 12:**
1. Put a F 2x1 horizontally on the left edge of the left vertical wall.
2. Attach a cylinder to the right.
3. Repeat these steps symmetrically on the right side.
**Continue in subsequent messages for further simplification.** Bag 1
1. Build a foundation using various pieces.
2. Create a front facade with buttons and clasps.
3. Construct sidewalls with symmetry.
4. Add a back wall with additional details.
5. Complete the roof structure.
Bag 2
1. Apply stickers to pieces as instructed.
2. Place labeled pieces on respective sides.
3. Attach buttoned pieces in front corners.
4. Extend the front facade with additional pieces.
5. Add finishing touches to the front structure.
Bag 3
1. Build sections using white and blue pieces.
2. Stack and assemble components in a specific order.
3. Attach completed units together.
4. Continue adding layers to form the structure.
Bag 4
1. Add a large piece to the existing base.
2. Attach sled pieces to one side.
3. Cover the surface with smaller pieces.
4. Add finishing details to the structure.
Bag 5
1. Stack vertical pieces on sleds.
2. Extend the structure with horizontal pieces.
3. Add handles and wedges to the top row.
4. Complete the structure with additional buttons.
Bag 6
1. Construct barrier parts using sticks and saucers.
2. Install barriers at designated locations.
3. Assemble searchlights with various parts.
4. Position searchlights at specified corners. </s> |
<s>[INST] Generate LEGO instructions for building the 10197 Fire Brigade set. [/INST] Bag 1:
1. Place two large platform pieces vertically side by side. Connect them with a 3x2 flat piece vertically in the middle of the front edge.
2. Create the back border by layering flat smooth pieces in the following order: 1x1, 4x1, 6x1, 1x1 (from separate bag), 8x1, 1x1 (from separate bag), 6x1, 4x1, 1x1.
Bag 2:
1. Build a pavement in the middle of the back using flat smooth pieces.
2. Add flat smooth pieces in a pattern from the back to the front, following the provided instructions.
Bag 3:
1. Construct a pavement in the right corner at the back using flat smooth pieces.
2. Add flat smooth pieces vertically and horizontally to complete the design.
Bag 4:
1. Build a pavement in the left corner at the back using flat smooth pieces.
2. Continue adding flat smooth pieces in a specific pattern as directed.
Bag 5:
1. Place a large flat smooth piece vertically in the center.
2. Add flat smooth pieces horizontally and vertically as instructed.
Bag 6:
1. Add flat pieces with cracks in a specific arrangement on the platform.
2. Continue adding flat pieces horizontally and vertically according to the provided instructions.
Bag 7:
1. Arrange vertical flat pieces on the right side of the platform.
2. Add an 8x1 flat smooth piece vertically on the right side and repeat on the left side.
3. Create a box using flat pieces and place it on the platform.
Bag 8:
1. Mark the borders for the right and left rooms using a variety of flat pieces.
2. Follow the given instructions to complete the room borders.
Bag 9:
1. Insert connectors and place flat pieces to build the room walls.
2. Continue adding flat pieces to complete the room structures.
Bag 10:
1. Rotate and place sector pieces in front of the right-hand room wall.
2. Add flat pieces to complete the design as described.
Bag 11:
1. Layer flat pieces on top of each other to build the right-hand room wall.
2. Add more flat pieces on top to complete the structure. To make building easier, follow these condensed instructions for assembling the LEGO structure:
Bag 12:
1. Build a bench using flat pieces.
2. Place the bench vertically on the right wall.
3. Add a strange furniture piece inside the room.
Bag 13:
1. Create four parts with smooth pieces and place them on the front wall.
2. Install pieces on the right room's front and left wall.
Bag 14:
1. Build four pillars and place them strategically.
2. Add pieces to the front and left room's walls.
Bag 15:
1. Construct two parts and fit them on the right and right room's walls.
2. Add vertical and horizontal pieces to the right wall and part.
Bag 16:
1. Assemble structures on the right and left room's front walls.
2. Place various pieces on the walls accordingly.
Bag 17:
1. Install pieces on the front walls of the rooms.
Bag 18:
1. Create parts and place them on the front wall.
2. Insert tools into the wall from the previous bag.
Bag 19:
1. Assemble parts and place them in the right room.
2. Create hooks for hard hats and place them accordingly.
3. Add additional elements to the front wall.
Bag 20:
1. Stack pieces and place them on the wall.
2. Add a shovel, hammer, and helmets to the wall.
Bag 21:
1. Install various pieces on the front walls of the rooms.
2. Create a fire alarm by combining different pieces. Consolidated LEGO Building Instructions:
Bag 22
1. Attach pieces to right front wall.
2. Add door.
3. Place pieces on back wall.
4. Attach pieces to left front wall.
Bag 23
1. Install parts on front wall.
2. Add pieces to right front wall.
3. Place pieces on left front wall.
Bag 24
1. Continue building on right front wall.
2. Add pieces to left front wall.
3. Construct stairs.
4. Add pieces to back walls.
Bag 26
1. Add pieces to right vertical wall.
2. Place parts on left vertical wall.
Bag 27
1. Add parts above stairs.
2. Continue building front walls.
Bag 28
1. Continue building front walls.
2. Add archway to back walls.
Bag 29
1. Attach parts to front walls.
2. Install ledges above broom and shovel.
3. Continue building vertical walls.
Bag 30
1. Make and place stacks near front opening.
2. Add pieces to front walls.
Bag 31
1. Create window and place.
2. Continue building around window area.
Bag 32
1. Build ledges for vertical beams.
2. Add fixtures to vertical walls.
Bag 33
1. Assemble garage door and install.
2. Continue building front walls.
Bag 34
1. Construct door and place on front wall.
Bag 35
1. Create window and install on front wall.
Bag 36
1. Add pieces to front walls.
2. Make roof over window area.
Bag 37
1. Continue building on right vertical wall.
2. Add bench pieces near archway. Consolidated LEGO building instructions:
Bag 38:
1. Place two upright pieces at each end of the front wall.
2. Create two lamps and position them to the left and right of the gate.
3. Add two 8x1 flat pieces on the front wall - one on each side.
4. Insert two 14x1 grooved pieces on the left and right of the gate.
5. Place two 1x1 smooth wedge pieces at the front beam corners.
Bag 39:
1. On the right vertical wall, add an 8x1, 6x1, and two 2x1 pieces.
2. Install a corner piece in the shape of H and a 2x1 upper-lip piece.
3. Repeat the process on the left vertical wall and left part of the back wall.
4. Attach two 6x1 flat smooth pieces - one on each side of the arch.
Bag 40:
1. On the right side of the front wall, place a series of 2x1, 2x2, and 2x1 pieces.
2. Repeat the pattern on the left side of the front wall.
3. Add various pieces to the right and left beams.
Bag 41:
1. Assemble tall windows and position them in the back wall openings.
2. Attach various flat pieces on the right beam and front wall.
Bag 42:
1. Place corner pieces and flat pieces on the left side of the back wall.
Bag 43:
1. Insert a long pole in the cone on the floor.
2. Add vertical pieces on the right and left vertical walls.
Bag 44:
1. Construct the top of the garage door and position it over the door.
2. Attach flat pieces on the right side of the front wall.
3. Add pieces to create the over-the-garage window.
Bag 45:
1. Build the over-the-garage window and install it above the garage door.
2. Add lip and flat pieces on the front wall on both sides.
Bag 46:
1. Create an arch using two parts in front of the garage window.
Bag 47:
1. Install stairs, pieces with corniced fronts, and racquets on the front wall.
Bag 48:
1. Insert claw pieces on corniced parts and place them on the front wall.
2. Add flat pieces to the front and over-the-garage-arch.
Bag 49:
1. Turn the structure and add pieces to the right and left vertical walls.
Bag 50:
1. Place vertical pieces on the right wall and horizontal pieces on the front wall.
2. Add flat pieces and corner pieces to the left side.
Bag 51:
1. Insert round handles into the doors and position them in the front arch.
2. Add various pieces over the window arches.
Bag 52:
1. Create a roof over the front wall arch.
2. Attach lip and pyramid pieces to the roof.
Bag 53:
1. Turn the structure and add pieces to the front wall.
2. Install inner partitions behind the eight-sided opening.
Bag 54:
1. Make the top step for the stair and position it on the stair platform.
2. Add pieces to the back and front walls.
Bag 55:
1. Place flat pieces on the back wall.
2. Add flat pieces to the front wall, including corner pieces D and F.
Bag 56:
1. Assemble a pole holder and attach it to the right and left vertical walls.
Bag 57:
1. Add corniced pieces and flat smooth pieces on the front and back walls.
2. Insert pieces into the helmets and position them on the front wall.
Bag 58:
1. Attach various flat smooth pieces on the left wall and front wall.
2. Create a street light and place it on the floor.
Bag 59:
1. Construct a flag using white and red pieces, creating an inverted stair pattern. LEGO Building Instructions:
Bag 60:
1. Build a tree: Attach cylinders to sticks.
2. Place stick with cylinders on the free button.
3. Enjoy!
Fire Brigade Book 2 Bag 1:
1. Construct platform using flat pieces.
2. Add vertical flat pieces to connect.
3. Continue adding flat pieces to build structure.
Bag 2:
1. Add vertical flat pieces to connect flat pieces.
2. Continue adding flat pieces in sequence.
3. Attach flat pieces vertically and horizontally.
Bag 3:
1. Add flat pieces in sequence to build structure.
2. Attach flat pieces horizontally and vertically.
Bag 4:
1. Place flat pieces to the front line and back.
2. Add horizontal and vertical flat pieces to connect.
Bag 5:
1. Add flat pieces to close openings.
2. Attach pieces in sequence to complete structure.
Bag 6:
1. Assemble pieces on stick.
2. Attach to structure's edge.
3. Continue adding pieces accordingly.
Bag 7:
1. Construct parts and attach to structure.
2. Add pieces to fill gaps.
Bags 8 to 15:
1. Continue building and assembling parts as per instructions.
Bag 15:
1. Construct a fridge following specific steps. Put aside.
18. Place a 2x1 piece with side buttons horizontally on the two right buttons of the front row of the 3x2 flat piece.
19. Add a 1x1 piece with the side button to the left of the 2x1 piece.
20. Place three 1x1 pieces with lips on the back row of the 3x2 flat piece, with the lips to the back.
21. Install a 1x1 flat smooth piece upright on the rightmost front side button.
22. Attach a 2x1 flat smooth piece on the other two front side buttons.
23. Place the door upright on top of the first row with the handle facing you and to the left.
24. Attach this part to the fridge, with the door facing up and the handle to the back, to the left of the grate piece.
25. Stand the fridge upright with the door facing you. Place a 2x2 flat smooth piece on top of the left side of the fridge.
26. Add a 2x1 flat smooth piece vertically to the right of the previous piece.
27. Insert two hot dogs into the fridge.
28. Rotate your structure 180 degrees. Position the fridge next to the back wall, on the left, skipping one column to the right from the left gap in the back wall.
Bag 16.
1. Build a Ping-Pong table by placing two flat 4x2 pieces vertically on the table with a two-button space between them. Connect them with a 4x2 piece horizontally on the two left middle buttons of the right piece and the two right middle buttons of the left piece.
2. Add two 4x1 pieces with side buttons vertically to the left and right of the 4x2 piece, with the side buttons facing outward.
3. Attach two 4x1 pieces with side buttons horizontally to the front and back of the 4x2 piece, with the side buttons facing outward.
4. Flip the structure upside down and add four 1x1 buttons in the corners to make legs.
5. Flip it right side up and place four 2x2 flat smooth pieces at the corners.
6. Add two 2x1 flat smooth pieces vertically to the right of the two left 2x2 flat smooth pieces.
7. Install a "net" piece vertically on the remaining free buttons, with the net side in the middle.
8. Position the Ping-Pong table horizontally next to the back wall, skipping four columns to the right from the fridge.
9. Place a 1x1 button on one of the paddles to represent a ball and put the two paddles upright on the two middle buttons of the long railing.
Bag 17.
1. Rotate the structure 180 degrees. Place two 4x1 pieces with side buttons horizontally to the right and left of the middle gap in the front wall, with side buttons to the front.
2. Skip four buttons to the right and place three 1x1 pieces with side buttons side by side on the wall, with side buttons to the front.
3. Repeat the same on the left side.
4. Add a 4x1 piece vertically on the left wall next to the last piece.
5. Place one 2x1 flat piece on top of another and add a 2x2 flat piece on top. Position this part to the back of the previous piece, overhanging to the right.
6. Add a 3x1 piece vertically to the back of it.
7. Continue building the structure according to the provided instructions for Bag 17.
Please provide the remaining instructions for further refinement. For the right side of your main part, place it horizontally with the smooth side facing forward in the middle of the front wall. Align it with the back of the protruding flat smooth piece.
Bag 10:
1. Make the trapdoor by placing the door frame horizontally with buttons on the left. Add the door so that the doorknob is in front and the door opens backward.
2. Add four 1x1 lipped pieces on the left side of the door frame with lips to the left.
3. Place two 2x2 flat smooth pieces vertically on the left buttons with lips.
4. Add four 1x1 lipped pieces on the right side of the door frame with lips to the left.
5. Install the doorknob.
6. Place the trapdoor flat on its side in the gap on the left side of your structure.
7. Add a 2x1 vertically to the left of the clasps-and-rolls part.
8. Place a 1x1 piece to the right front corner of the clasps-and-rolls piece.
Continue with Bags 11 to 20 following the concise format above for each step. For example:
Bag 11:
1. Place nine 1x1 smooth wedge pieces horizontally in front of the trapdoor with lower sides to the front.
2. Add four wedge pieces to the right side of the trapdoor with lower sides to the right.
3. Put a flat 12x1 piece in the middle of the front wall on top of the clasp-and-rolls part.
4. Place two flat 1x1 pieces on each side of the 12x1 piece.
Continue this format for each bag of instructions to simplify and clarify the building process. </s> |
<s>[INST] Generate LEGO instructions for LEGO set 76423 Hogwarts Express and Hogsmeade Station, including building steps for recreating the arrival of new Hogwarts students with authentic details. [/INST] **Minifigure Group 1 (Harry Potter):**
- Attach hair to head, head to torso, and torso to legs.
- Add brown wand to right hand and coin to left hand.
- Dress Harry in black pants, gray vest, black jacket with red lapels, white collared shirt, and red tie.
- Harry has unruly black hair and thin-rimmed glasses.
**Sub-build 1 (Road Sign to Hogwarts):**
1. Place green 4x4 circular plate.
2. Add dark gray 2x2 circular tile with single stud.
3. Attach green 1x1 plate with three leaves on each side.
4. Stack candles four high on the tile.
5. Put lantern frame on top of the candles.
6. Create sign board for "Hogsmeade" and "Hogwarts."
**Main-Build 1 (Steam Locomotive):**
1. Build locomotive frame with dark gray bricks.
2. Add axles for driving wheels.
3. Attach plates for tender connection.
4. Build front and back axles for driving wheels.
5. Construct front bogie for wheel rotation.
6. Extend frame and add plates for structure.
7. Attach front bumper assembly and wheels to the train.
8. Add wheels to the bogie.
**Closing Steps:**
- Place red plates for color accents on locomotive.
- Build steam chest and piston rod for the left side of the locomotive. 1. Attach angled bars to front frame above left wheel. Rotate locomotive with bumper on the left.
2. Repeat assembly on the other side mirroring the first.
3. Build up locomotive with red bricks and tiles.
4. Create fire in the firebox using specific colored tiles and plates.
5. Make engineer's controls with specific bricks and tiles.
6. Start building the boiler with a black plate and white bricks.
7. Continue building boiler with white plates, blue bricks, and red tiles.
8. Construct the boiler's front part with specific bricks and tiles.
9. Build funnel on top of the boiler with black pieces.
10. Attach a bar to the boiler's side.
11. Make the front of the boiler using specific bricks and tiles. 1. Attach front assembly to boiler with stickered macaroni tile on top. Ensure it stays on top.
2. Add detail to top of boiler: tan 2x14 plate to left of funnel, overhang six studs left.
3. Place dark gray 2x2 inverted curved slope on leftmost column of previous piece.
4. Add red 1x2 plate vertically to right column of previous piece.
5. Add red tiles and details to left side of boiler.
6. Attach boiler to locomotive frame, aligning parts correctly.
7. Add red slopes and tiles to boiler and firebox.
8. Attach windows and handrails to locomotive cab.
9. Install "HOGWARTS EXPRESS" macaroni tile on boiler.
10. Build tender for locomotive with fuel and water storage.
11. Attach couplers to connect tender to locomotive and other cars.
12. Build bumper for tender and attach train wheels.
13. Add shovel to tender and coupler to attach to locomotive.
14. Assemble Ron Weasley minifigure and his sandwich.
15. Begin building first coach for Hogwarts Express. 1. Connect tan 1x2 tiles with walls to front and back rows of a 2x4 plate.
2. Add red 1x2 bricks with Hogwarts crest stickers to front and back of the 2x4 plate.
3. Attach red 1x4 bricks on each side of the previous pieces.
4. Insert red 1x1 bricks with recessed studs and square holes on sides, add T-shaped bars.
5. Place red 2x2 corner bricks on front corners and a stickered one on the back.
6. Add orange plates and tiles to create structure and cover corners.
7. Position red 1x2 bricks on left and right columns of the coach.
8. Build doors using specific pieces and place chairs and tables inside.
9. Complete the details on the corners and top of the coach.
10. Construct windows, fill gaps with bricks, and add a removable front wall.
11. Attach wheels and couplers to the coach.
12. Assemble the roof and place it on the coach.
13. Create a coupler to connect the coach to the tender.
14. Assemble the trolley witch minifigure.
15. Begin building the trolley witch's cart with specific color-coded parts. 1. Place a tan 2x2 plate on the top left of the cart.
2. Add two transparent yellow 1x1 circular bricks on the back row to create butter beers.
3. Put a light gray 1x1 circular tile on each butter beer.
4. Add lollipops by attaching a pale yellow 1x1 circular plate with a bar on one side to a white 1x1 circular tile with a red swirl pattern.
5. Secure the lollipops in front of the butter beers by inserting the bar into the hollow studs.
6. Include more treats by placing a white 1x1 brick with a Bertie Bott’s Every Flavor Beans box pattern.
7. Attach a white 1x1 pyramid tile and a dark blue 1x1 circular tile with a chocolate frog box pattern.
8. The trolley witch’s trolley is now complete.
Main-build 4 - Second Coach
9. Lay a black 6x8 plate horizontally.
10. Add a tan 2x4 plate centered on the rightmost column and overhanging by one column.
11. Attach another 6x8 plate to the right, using the overhanging 2x4 plate.
12. Place tan 1x2 tiles with walls on three sides on the front and back rows of the 2x4 plate.
13. Add red bricks with Hogwarts crest stickers.
14. Attach red 1x1 bricks with a recessed stud and T-shaped bars.
15. Place red 2x2 corner bricks and create windows.
16. Assemble seats, tables, and space for the trolley witch’s cart.
17. Complete the coach walls and windows.
18. Build the removable front wall with windows.
19. Attach the wall to the coach.
20. Construct the underside and couplers for the coach.
21. Assemble train wheels and attach them to the coach.
22. Work on the roof of the coach.
23. Create the coupler to connect the coach to the tender.
24. Connect the coupler to the tender to complete the train. 1. Assemble Draco Malfoy minifigure: Attach hair to head, head to torso stud, torso to legs. Add black wand to right hand. Outfit includes black pants, black jacket with green lapels and Slytherin badge, white shirt, green tie, short blonde hair, devious smirk.
2. Building Hogsmeade station:
- Start with platform: Green 1x6 plate, tan 1x4 brick centered vertically on it, dark gray 1x2 bricks on sides overhanging by one stud, light gray 1x12 plates under overhanging studs.
- Continue step-by-step construction, placing bricks and plates as instructed to build up the station and rooms.
3. Lee Jordan minifigure: Attach hair to head, head to torso stud, torso to legs. Insert brown wand in right hand, outfit with Gryffindor crest.
4. Complete owl post area: Place various bricks, window, owl roost, and letter tile as directed.
5. Finish station details: Add stickers to bricks, assemble windows, build clock with shelf, and place stickers on tall bricks.
This revision condenses the instructions, making them easier to follow while retaining all essential steps and details. 1. Attach the stickered brick depicting a ladies' room to the right bathroom wall.
2. Add a tan 1x2x3 brick without a sticker vertically in front of the stickered brick.
3. Assemble a window using white 1x2x3 window panes in a red 1x4x3 frame to the left of the previous piece.
4. Follow steps to build a clock platform, including adding a clock patterned tile and a 1x2 masonry brick.
5. Place a train timetable sticker and a frog on the main room fireplace.
6. Build a low wall with a rail, add a narrow window, and place a brick with side studs next to it.
7. Construct the entry door with a handle and attach it to the entryway.
8. Add dark red plates, corner plates, and tiles to the bathroom and owl post walls.
9. Build the roof, small roofs, lantern, and leaves, and place them accordingly.
10. Extend the platform past the station and decorate with a picket fence, a light post, and the Hogsmeade sign.
11. Assemble the Hagrid minifigure and attach accessories.
12. Create train tracks using plastic plates.
This revised version condenses the steps for building a LEGO station with clear instructions and essential details. Assemble the railroad tracks by aligning and snapping together full and half ties at the ends of each track section. Place two straight track pieces horizontally in front of the station. Attach a dark gray 8x12 railroad ramp to the left and right of the tracks. Decorate the rails with green 1x1 flower plates and dark tan 1x1 quarter circle tiles. Attach the tracks to the slopes in front of the train platform. Add more straight track pieces to the right of the station section. Decorate this section with flower plates and quarter circle tiles. The Hogwarts Express and Hogsmeade Station are now complete. LEGO figures can sit in the train cars, and the trolley witch can stand next to her cart. Drive the train on the floor and up the ramp to the station. LEGO trains can also run on these tracks. Thank you for building this set! </s> |
<s>[INST] Generate LEGO instructions for the 31133 White Rabbit set designed by Alex Charbonneau and tested by Natalie Charbonneau. Kids aged 8 and up can build a posable brick-built toy bunny with interchangeable snacks: a carrot or a flower. Enjoy 3 build-and-play experiences by transforming the bunny into a cockatoo parrot or a white seal, each with unique movable features. Includes accessories like seeds for the parrot and a fish for the seal. Stand the toy rabbit over 5.5 in. (15 cm) high for on-the-go play. Box features images of the white rabbit, cockatoo, and seal builds. [/INST] **Concise LEGO Building Instructions:**
1. Begin by assembling the rabbit's body using white and tan plates and bricks.
2. Add the tan 1x2 plate and white 1x2 plate with side studs as described.
3. Attach the dark gray 2x2 brick and white 1x2 brick with log pattern.
4. Build the back and attach it to the body.
5. Construct the rabbit's back legs and attach them to the body.
6. Repeat steps for the other leg.
7. Start building the front leg with white plates.
**Note:** For the full detailed instructions, please refer to the original text. 1. Place a white 1x4 plate to the left of the previous piece.
2. Add a tan 1x2 brick with side studs to the right.
3. Put a tan 1x1 plate on the right stud and a white 1x1 plate with a curved slope on the left.
4. Attach a light gray 1x2 plate with a tow ball socket to the back.
5. Continue building the leg with various plates and tiles.
6. Build the rabbit's paw separately and attach it to the leg.
7. Repeat steps for the opposite leg.
8. Proceed to build the head using a dark gray 2x2 brick with a tow ball and follow the detailed instructions for each component.
9. Assemble the head and attach it to the body.
10. Construct the rabbit's ears and attach them to the head.
11. Build a yellow flower and a carrot as additional features for the rabbit. LEGO Building Instructions:
Carrot:
1. Place 1x2 orange curved slope tiles on opposite sides of a 1x4 plate.
2. Repeat step 1 on the other two sides.
3. Build the stem with green plates and leaves.
4. Attach the stem to the carrot to complete the White Rabbit.
Cockatoo:
1. Build the body.
2. Construct the chest.
3. Add the tail.
4. Attach the legs.
5. Build the wings in pairs.
6. Attach the wings to the body.
7. Create the head with bright yellow plumage.
Bag Organization:
- Group 1: Steps 1-6
- Group 2: Steps 7-17
- Group 3: Steps 18-26
- Group 4: Steps 27-36
- Group 5: Steps 37-39
- Group 6: Steps 40-51
- Group 7: Steps 52-60. LEGO Building Instructions:
Cockatoo:
1. Place pieces in the following order: white 2x4 brick, white 1x1 quarter circle tile, white 2x3 plate, white 1x2 plate with two side studs, orange 1x2 plate, pink 1x2 plate with round ends, white 1x2 brick with log pattern, tan 1x2 brick with two side studs, white 1x2 brick with log pattern, white 1x1 brick with side stud, white 1x2 plate, white 1x2 plate with hanging studs, white 2x2 circular plate, white 2x3 plate, white 2x2 curved slope tile, white 2x2 tile with stud, white 1x1 tile with clip, black 1x1 circular tile with eye pattern, white 1x2 brick with log pattern, white 1x2 brick with side stud, black 1x1 pyramid tile, white 1x1 plate with curved slope, white 1x2 plate with vertical clip, white 2x2 tile with stud top, white 1x1 tile with clip, white 4x4 curved wedge, black 1x2 curved slope tile, gold 1x1 rounded plate with bar, yellow 1x2 curved slope tile, yellow 1x2 plate, yellow 1x3 half arch.
2. Assemble the pieces according to the provided instructions to complete the Cockatoo build.
Seal:
1. Place pieces in the following order: white 2x12 plate, light gray 1x2 plate with tow ball socket, tan 2x4 plate, white 1x4 plate, dark gray 1x2 plate with tow ball, white 1x4 plate, white 2x6 plate, tan 2x2 plate, white 2x4 brick, tan 1x2 brick with side studs, tan 2x4 plate, white 1x2 plate, pink heart, tan 2x2 plate, white 1x2 plate, white 2x4 tile with rounded ends, white 1x1 curved slope plate, pink 2x3 plate, white 2x6 plate, orange 1x2 plate, white 1x3x3 half arch, tan 1x2 plate, dark gray 1x1 brick with side stud, tan 1x4 brick with side studs, tan 1x2 brick with side studs, dark gray 1x1 brick with side stud, white 1x2 quarter cylinder, orange 1x2 plate, tan 1x2 plate, white 2x4 curved slope tile, dark gray 2x2 plate, pink 1x2 plate with rounded ends, white 4x4 curved wedge, white 1x2 brick with log pattern, black 1x1 cone, white 3x3 right sloped wedge, white 3x3 left sloped wedge, tan 1x1 plate, white 3x3 flat quarter dome, white 3x3 right sloped wedge, white 3x3 left sloped wedge, dark gray 2x2 brick with tow ball.
2. Assemble the pieces according to the provided instructions to complete the Seal build. 1. Build the head:
- Place a white 2x3 plate horizontally.
- Add a tan 2x4 plate to overhang to the left.
- Attach a tan 1x2 plate on the right of the tan plate.
- Add white 1x2 plates with studs on the front and left clip.
- Attach a pink 1x1 rounded plate and a white 1x1 tile for the lower jaw.
- Add white 2x2 and 1x2 bricks to build the head structure.
- Create cheeks using white and tan plates.
- Place a white 6x6 circular plate and a 3x3x2 quarter dome.
- Attach various colored plates to complete the head structure.
2. Build the fish:
- Place tan and orange plates to create the fish's body.
- Add pink and black pieces to form the fish's tail.
- Assemble the fish's tail top and bottom.
- Combine the tail pieces to complete the fish.
3. Final assembly:
- Attach the seal's head to the body with a tow ball socket.
- Create the fish sub-build using various colored plates.
- Pose the seal with the fish to complete the set. </s> |
<s>[INST] Generate LEGO instructions for 43198 Anna's Castle Courtyard. [/INST] Instructions for LEGO courtyard build:
1. Place a medium dark flesh 8x1 trapezoid plate horizontally, short side to front.
2. Add a light tan 8x1 arch piece with columns in the middle of the back row.
3. Place 2 tan 1x2 bricks with clasp on the sides of the arch.
4. Add golden tiles and pieces for detail.
5. Build a fountain separately.
6. Arrange light tan log bricks around the fountain.
7. Stack more log bricks vertically on top.
8. Add dark turquoise slope bricks.
9. Construct window and floral details separately and place on arch.
10. Attach plates with handles on the sides.
11. Add half arch bricks on top.
12. Place a light tan arch brick horizontally.
13. Attach dark turquoise slopes.
14. Create and attach flags with wrenches for decoration.
15. Add a handle plate and double slope on top.
16. Prepare a separate part with a medium dark flesh plate.
17. Add bricks with handles and floral pieces.
18. Attach a plate and flower details.
19. Place a magenta plate on top.
20. Attach half arch brick and tooth plate.
21. Attach this part to the left of the structure.
22. Repeat steps 16-21 on the right side.
23. Repeat step 16.
24. Repeat step 17 for the right side.
25. Repeat step 18.
26. Repeat step 19.
27. Repeat step 20.
28. Attach parts to the right side.
29. Build lanterns and place on attached parts.
Enjoy your build! Thank you for assembling this set. </s> |
<s>[INST] Generate LEGO instructions for the 41738 Dog Rescue Bike set. Featuring a dog rescue bike with a removable trailer, a park scene with a hidden puppy, and Aliya and Victoria mini-dolls, this 125-piece set allows kids aged 6 and up to enjoy pet-care role play adventures. Instructions span 76 pages, guiding builders through creating the bike, trailer, park elements, and accessories like food and water for the puppy, binoculars, and more. [/INST] Building Instructions:
5. Build Aliya: Attach dark flesh legs with blue shoes and a blue shirt to a yellow and blue torso with dark flesh arms. Add a dark flesh head and a dark brown afro hair on top, ensuring alignment.
7. Assemble the bike: Connect a blue bike frame horizontally with two thin black wheels. Make sure the wheels click into place.
8. Add details to the bike: Attach a gray 1x2 plate with a bar and a transparent-yellow circular tile to the frame.
9-10. Prepare the green bucket: Position the bucket with a side hole facing backward.
11-16. Construct a picnic table: Place tiles and bricks to form the table and a sandwich.
19. Build Victoria: Combine a medium tan child body, a head, and a ponytail hairpiece.
19-20. Set up dog food and water bowls: Place a light yellow round plate with a blue circle for water and a brown circular tile for food.
20-29. Create a grass floor with flowers and a bush base.
30-39. Construct a bush with adjustable leaves.
41-45. Build a street lamp with a lantern and a missing dog flier.
46-47. Insert a shovel in a trash can.
48-54. Make a bike trailer with taillights and a dog ramp.
55-59. Add details to the trailer with stickers and additional features.
60-63. Attach the ramp and a slide to the trailer.
64. Install wheels on the bike trailer. 1. Attach two large black wheels to the pegs on the right side of the upside-down bike trailer.
2. If stickers were not pre-placed, apply two white and blue stickers with happy dogs to a white 2x2 panel.
3. Build a flag by attaching a white pole with hooks to a white 2x2 panel.
4. Insert the flag into the back hook on the right side of the bike trailer.
5. Attach a black binocular piece to the front hook on the trailer.
6. Attach the bike to the left mechanical arm on the trailer.
7. Dog Rescue Bike is now complete. No ads included. </s> |
<s>[INST] Generate LEGO instructions for building a miniature display model of Disney's The Haunted Mansion ride, including an exclusive Butler minifigure. The set features details like a dining room, chandelier, gallery, and recognizable paintings of the Hitchhiking Ghosts, Madame Leota, and the Gravekeeper. Perfect for LEGO fans, miniature collectors, and Disney enthusiasts aged 8 and up. The 680-piece model stands over 5 inches high, 4 inches wide, and 4 inches deep, with sticker paintings for the gallery. Capture the spooky essence of the Haunted Mansion with detailed visuals on the box, showcasing the mansion, eerie backdrop, and scenes from the iconic ride at Disneyland on the back. [/INST] Building Instructions:
Bag 1: Sub-build 1 - Butler Minifigure
1. Assemble the butler minifigure by placing fabric coattails over legs, head onto torso, and torso onto legs.
2. Align the coattails' middle two holes with leg studs. Fold tails down and secure the other holes over leg studs.
Main Build - Mini Disney Haunted Mansion
1. Open group 1 and group A. Keep them separate.
2. Start by creating an 8x16 rectangle using two black 8x8 plates.
3. Add black tiles and plates to form the base of the mansion.
4. Proceed to outline the mansion's walls.
5. Integrate components from group 2 to build up the structure.
6. Attach black rounded corner plates to create a gap in the base.
7. Add black tiles and a "4x4 macaroni tile" to complete the base's border.
8. Use brown and blue plates to continue building the walls.
9. Utilize components from group 3 to extend the walls.
10. Add more plates and tiles for wall details.
11. Incorporate additional plates to enhance the structure.
12. Complete the wall details with plates and tiles as specified.
13. Begin constructing windows at the back of the mansion.
14. Attach white and clear plates and tiles to create windows with shutters.
15. Add more window features using plates and tiles.
16. Integrate plates and tiles to further build the window details.
17. Attach sand green circular plates to specific locations on the structure.
18. Proceed to add sand green bricks for further wall development.
19. Create first-story windows using a specific combination of components.
20. Place sand green circular plates onto the structure.
21. Build corner windows following a similar method to regular windows.
22. Assemble windows by stacking dark green and clear plates.
23. Continue building corner windows with additional components.
24. Add more window details to the structure.
25. Attach corner windows in designated locations on the base.
26. Include tall bricks and a plate for additional window features.
27. Start building another corner window using specific plates.
28. Add a white plate with side studs to the corner window.
29. Place a white brick on the bottom side stud.
30. Continue building the corner window with additional components.
Bag 2: Group 5, Group B, and Group C
1. Open group 5, group B, and group C separately.
2. Stack sand green 1x1 bricks and proceed to place them on the structure.
3. Build windows with dark green shutters using a specific combination of plates and tiles.
These revised building instructions are clearer and more concise for easy following. 1. Stack dark green, clear, and green 1x1 plates to create two windows. Attach them to the sides as specified.
2. Place white 1x2 plates horizontally, add clear 1x1 plates, and then a white 1x2 tile to form the main entry door.
3. Attach the side entrance using white 1x1 brick, a white 1x2 tile, and two clear 1x1 tiles.
4. Connect the windows and doors to create the side entry.
5. Build the main entry door with a sand green 1x1 plate and a white 1x1 plate with side studs.
6. Complete the windows with dark green, clear, and green plates and attach them to the top side stud.
7. Construct the dining room window wall using tan and white bricks.
8. Set up the portraits on brown 1x2 tiles to represent ghostly figures.
9. Create a dining room table with round plates and a transparent orange flame.
10. Place micro-figures in the dining room and add white bricks to the corners.
11. Build upward with white bricks, forming the second story.
12. Install arched window panels on the front and left sides of the house.
13. Close the ceiling with white plates, preparing for further construction.
14. Set up window attachment points with white bricks and tiles.
15. Add window details using clear plates, white plates, tiles, and bricks.
16. Create bases for arched window panels with sand green plates.
17. Construct the second story windows with clear plates, white plates, tiles, bricks, and dark green plates.
This condensed version aims to streamline the instructions while maintaining the essential steps for easy LEGO building. Consolidated LEGO building instructions:
Step 58: Place five 1x2x2 tall bricks as described.
Step 59: Build corner windows for the second story.
Step 60: Add dark green and clear plates for windows.
Step 61: Add tiles and bricks for the side entrance.
Step 62: Add tiles and bricks for the right side window.
Step 63: Attach windows on the left dining room wall.
Step 64: Build another corner window.
Step 65: Add a brick with a side stud.
Step 66: Add a white 1x1 brick.
Step 67: Create windows with dark green and clear plates.
Step 68: Build the main entry door.
Step 69: Complete the side entrance window.
Step 70: Attach the window to the deck.
Step 71: Build another window.
Step 72: Add white 1x1 bricks.
Step 73: Create windows with dark green and clear plates.
Step 74: Build the main entry door for the deck.
Step 75: Attach the window piece to the existing structure.
Step 76: Build the front and right walls of the second story.
Step 77: Build the main entrance door and deck side entry.
Step 78: Construct the railing for the front deck.
Step 79: Add arched window panels to the second story.
Step 80: Begin building the back wall of the dining room.
Step 81: Add bricks for the back wall design.
Step 82: Continue building the wall with additional bricks.
Step 83: Add more bricks to the wall structure.
Step 84: Place dark tan and black plates for the wall.
Step 85: Attach black clip tiles for the balcony.
Step 86: Install black 3L bars for the handrail.
Step 87: Place the candelabra and ghost portraits.
Step 88: Create sconces and attach them to the wall.
Step 89: Start building the candelabra.
Step 90: Complete the candelabra assembly.
Step 91: Place the balcony over the dining room.
Step 92: Add scroll bricks and tiles to the dining room.
Step 93: Attach plates and bricks to the entryway.
Step 94: Build corner structures for the balcony.
Step 95: Add tiles and bricks to the balcony wall. To build the LEGO Mini Disney Haunted Mansion:
1. Create balcony wall using 1x4 tiles and scrolls.
2. Build third story windows using clear plates, white plates, tiles, and bricks.
3. Construct tall bricks behind windows using light gray bricks.
4. Make the deck roof with sand green plates.
5. Add details to dining room walls with white plates and bricks.
6. Install dark gray tiles for windows around corner tall bricks.
7. Add white plates and bricks to dining room walls.
8. Place white and light gray plates for roof.
9. Attach white circular tiles and candles to create columns.
10. Install white plates for entry roof.
11. Build white and dark gray slope tiles for main and side entry roofs.
12. Stack light gray and dark gray plates on entry roofs.
13. Add dark gray slope tiles for peaked roofs on entries.
14. Place white tiles with clips to outline main roof.
15. Fill in gaps with vertical white tiles with clips.
16. Add light gray plates with studs for details on roof.
17. Create chimneys using brown tiles and bricks.
18. Finish with top circular room using white plates and tiles.
19. Attach the room to the mansion roof.
Congratulations on completing the Mini Disney Haunted Mansion! </s> |
<s>[INST] Generate LEGO instructions for the 31043 Chopper Transporter set. [/INST] LEGO Building Instructions:
Main Structure:
1. Place a 4x2 orange piece horizontally on the table, then add a 3x2 orange piece on top, aligned at the left.
2. Attach a corner piece on the left edge, followed by a 2x2 piece to the right.
3. Add a lip piece vertically on the right edge, then two 1x1 white pieces to the left.
4. Place a 2x2 piece on top of the previous pieces and to the right.
5. Attach a hood piece horizontally to the left, then add a 2x1 piece with a button vertically on the right edge.
6. Place a 2x1 piece with a handle to the left, another one symmetrically to the back, and two 1x1 slide pieces on the corner piece.
7. Construct a part with a stepped 2x2 piece and a 1x1 white piece underneath.
8. Add a 6x1 piece horizontally protruding to the left.
9. Attach a 1x1 white piece on the front right corner, followed by a 2x1 curve to the left.
10. Place a wedge on the front right corner.
11. Install the part on the structure with a propeller at the back.
12. Add a 2x2 washer board horizontally on top, starting from the left.
13. Create a turntable part and place it on the main structure.
14. Build the landing gear and attach it to the main structure.
15. Attach buttons on a 6x1 white piece and the turntable.
16. Add grate pieces vertically on top of the structure and insert the propeller into the connector.
Truck:
1. Place a 3x2 grey piece horizontally on the table, then add a 2x1 orange piece vertically on the right edge.
2. Attach a 4x2 black piece horizontally overhanging to the left.
3. Add a 10x2 piece underneath the overhanging part and to the left.
4. Place a 2x1 orange piece vertically to the left of the 4x2.
5. Add inverted disk and axle pieces to the structure.
6. Attach corner pieces, grate pieces, and buttons to the structure.
7. Construct a part with buttons and mount it on the structure.
8. Add additional pieces to the structure symmetrically at the back.
9. Create a part with buttons and clasp and mount it on the structure.
10. Attach various pieces to the structure.
11. Add wedges and buttons to the structure.
12. Attach more pieces to the structure.
13. Add stepped pieces, grate pieces, and white pieces to the structure.
14. Attach cornice pieces and sled to the structure.
15. Add more pieces to the structure.
16. Attach button and wedge pieces to the structure.
17. Add a long piece horizontally to the left of the structure.
18. Attach arch pieces to the structure.
19. Add more pieces to the structure.
20. Construct a part with various pieces and install it on the structure.
21. Add button pieces to the structure.
22. Attach cornice and roll pieces to the structure.
23. Add handle and side hole pieces to the structure.
24. Attach more pieces to the structure.
25. Add green pieces to the structure.
26. Attach grate and curve pieces to the structure.
27. Add button and curve pieces to the structure.
28. Install the wheels on the axles.
Thank you for building this set! </s> |
<s>[INST] Generate LEGO instructions for building the Up-Scaled LEGO Minifigure (40649) designed by John Le and tested by Matthew Shifrin. This posable figure stands over 10.5 inches tall and includes movable head, arms, legs, and hands. The figure features an opening hat that reveals a standard-sized minifigure inside for role-play fun. The set consists of 654 pieces, with 204 build steps, and is suitable for ages 10 and up. The assembly includes sorting pieces from 5 labeled bags: 3 bags for the red torso, 2 bags for the blue legs, 1 bag for hands and arms, 1 bag for the head, and 1 bag for the hat and minifigure [/INST] LEGO Building Instructions:
Bag 1 - Back of Torso:
1. Place 1 red 1x4 plate flat, then add 1 red 1x6 brick on top, overhanging on left and right.
2. Add 2 red 1x6 plates vertically under the overhang of the 1x6 brick.
3. Attach 2 red 1x10 bricks vertically on the left and right of the 1x6 brick.
4. Place 2 red 1x6 plates underneath the overhang of the previous step.
5. Stack 1 red 1x6 brick on 1 red 1x4 plate, then attach to the front.
6. Add 4 red 2x2 plates and 2 red 1x2 slope tiles to create corners.
7. Insert 2 red 1x4 plates and 2 red 2x6 plates to form the sides.
8. Add 2 red 2x6 bricks, 4 red 1x2 grill slope tiles, and 4 tall red 1x2 slopes for the back.
9. Place 2 more tall red 1x2 slopes and a red 1x6 tall panel.
10. Add 2 tall red 1x2 slopes and a red 1x6 tall panel.
Group 2 - Inner Mechanism:
11. Place 1 red 1x4 brick with 3 holes flat, then add 1 teal 1x2 plate.
12. Add 1 light grey 1x2 brick with a cross-hole and 1 teal 1x2 plate.
13. Stack 1 white 1x4 plate with inverted slopes, 1 tan 1x2 brick, and 2 purple 1x1 circular plates.
Continue with the remaining steps for Group 2. 1. Start by assembling two structures using 8-side stud plates and teal 1x2 plates. Place the teal plates vertically on the left and right sides of the 8-side stud plates. Repeat this step to make two structures.
2. Place the structures horizontally and symmetrically on the front and back of a white 2x8 plate, fitting them between two black 2x4 plates with raised sides.
3. Flip the build upside down and ensure it is horizontal with the axle running left to right.
4. Add a blue 2x2 plate, a blue 2x2 circular plate, and two bright green 1x2 plates with side studs to create a structure that fits into the front and back of the build.
5. Assemble a leg mechanism using light green 2x8 plates, purple 2x4 tiles, blue 1x2 plates with attached 2x2 tiles, dark grey technic pieces, black balls, and red 1x4 axles.
6. Continue building the leg mechanism with blue plates and tiles, creating curves and gaps for attachment.
7. Attach the leg mechanism to the build, ensuring alignment and no overhang.
8. Build the right leg using blue bricks, plates, and tiles, following the instructions step by step.
9. Complete the right leg assembly and attach it to the main build.
10. Congratulations, you have finished building the torso and leg components. **LEGO Building Instructions:**
**Left Leg:**
1. Place 1 blue 6x6 plate upside down.
2. Add 2 blue 1x6 bricks and 2 blue 1x4 bricks vertically and horizontally.
3. Add 2 blue 1x6 plates and 2 blue 1x4 plates horizontally and vertically.
4. Add tiles and bricks according to the instructions.
5. Complete the leg build.
**Main Build:**
1. Attach the left leg securely.
**Left Arm:**
1. Place 1 red 1x2 brick horizontally.
2. Add plates, tiles, and bricks following the step-by-step instructions.
3. Repeat until the arm build is complete.
**Additional Steps:**
1. Align and attach the arm to the main build using the hinge plate.
2. Insert the triangular plate and complete the arm construction.
By following these simplified instructions, you can efficiently complete the LEGO build. Refined LEGO building instructions:
1. Left Arm:
- Place 2x2 slope tile and 2x2 curve tile.
- Add 1x1 and 1x2 slope tiles.
- Attach the arm to the main build.
2. Hands (repeat for both):
- Construct hand using various yellow bricks and tiles.
- Attach the hand to the arm.
3. Right Arm:
- Build arm using red bricks, plates, and tiles.
- Attach arm to the main build.
4. Head:
- Assemble head using light green and grey plates, orange and white bricks, and yellow tiles.
- Attach the head to the build.
5. Final Assembly:
- Combine the head with the build, ensuring proper orientation and alignment.
- Attach the head securely to the main build. **LEGO Building Instructions: Up-Scaled Minifigure**
Group 28: Assemble the minifigure with blue legs, red torso, yellow head (happy face), and blue cap.
Group 29 — Hat:
1. Place a blue 1x2 plate horizontally.
2. Add 2 blue 1x2 plates with hinge clips on top, overhanging left and right.
3. Attach 2 blue 1x1 plates with side studs under the overhang.
4. Place a blue 1x4 brick on top of the side studs.
5. Add another blue 1x4 brick on top, followed by a tan 1x4 plate.
Group 30 — Hat:
1. Place a green 1x2 plate on top of the tan plate.
2. Add 2 black 1x1 plates with side studs, left and right of the green plate.
... (continue remaining steps in a similar summarized manner) ...
**Final Steps:**
203. Attach the driver cockpit to the hat, ensuring correct placement.
204. Attach the large blue dome piece to the back of the hat.
205. Place hat on the Up-Scaled Minifigure. Seat the small minifigure in the cockpit, adjusting the handlebars as needed. </s> |
<s>[INST] Generate LEGO instructions for building Aliya's Room (41740) set, designed by Ann Wei and tested by Natalie Charbonneau. The set features Aliya and Paisley mini-dolls, along with Aira the dog character. The room includes a variety of accessories such as school papers, a swivel chair, laptop, book, lamp, trophy, and dog toys. The set encourages creative play and storytelling for kids aged 6 and up. Use the LEGO Builder app for intuitive building guidance, 3D model viewing, progress tracking, and set saving. The set is designed for imaginative play, measuring over 3 inches high, 5 inches wide, and 3.5 inches deep. Follow the 95 steps in the instruction [/INST] 1. Build minifigure Aliya with dark brown afro hair, dark flesh head, light blue torso, and pants with pink shoes.
2. No instructions, just a drawing of Aliya waving, with fun doodles around her.
3. Connect light green 1x2 tile and plate with hinges to make a book cover.
4. Attach "once upon a time" tile vertically on the book plate.
5. If needed, place a sticker of two people on the book cover.
6. Crown a small dog named Aira with a crown.
7. No instructions, just a map from Paisley's to Aliya's house.
8. Begin projector: assemble light blue plate with pink circular tile, 1x2 white plates, and light gray bar.
9. Add popcorn brick and screen structure with stickers.
10. Attach camera lens under the screen structure.
11. Slide in phone tile for projector's movie feature.
12. Construct Aliya's room with light blue plate and white brick.
13. Add ridged white brick, brown plates, and tan bricks for room details.
14. Create rug with blue and purple tiles.
15. Build bed frame with yellow slide bricks and plates.
16. Make mattress with yellow and light purple plates.
17. Assemble hidden pull-out bed beneath main bed.
18. Add handles to pull-out bed for easy sliding.
19. Furnish top bed with blankets, pillows, and a purse.
20. Install wheel and window panels on the build.
21. Attach a bookshelf and additional windows.
22. Add curved bricks and decorations to complete the build.
23. Place a laptop with a screen sticker in Paisley's hand.
24. Furnish Paisley with long wavy dark red hair, light flesh head, heart torso, and pink pants.
25. Construct lamp with rod, round plate, and yellow stud.
26. Create storage drawers and desk for the room. 1. If stickers weren't pre-placed, find and place the "A" grade sticker on a white 2x2 panel.
2. Insert a brown drawer with a handle into the top half of an open box and place a white 2x2 panel in the drawer.
3. Position the drawers in front of the upward-sloped brick on the room's front-right, ensuring alignment with the room's edges.
4. Extend the room's floor by attaching a large light blue half-circle to the main floor, aligning the edges.
5. If stickers weren't pre-placed, apply a 6x6 white sticker to a 1x6x6 box panel.
6. Place the stickered panel vertically at the room's far-right edge, in front of stacked curved bricks and above the drawers.
7. Add a dark blue 1x4 curved plate on top of the curved bricks, followed by two dark blue 1x2 plates vertically.
8. Create a desk side with white C-panels, a dark blue 2x2 plate, and a transparent 1x2 couch tile.
9. Assemble the desk side with colorful notebooks by stacking a light blue 1x2 plate, a purple 1x2 plate, and a pink stickered 1x2 tile.
10. Position the desk side in front of the lamp in the rear corner.
11. Connect the desk side to the drawers by placing a dark blue 2x4 plate and a dark blue 1x1 plate.
12. Decorate the desk with a purple pen and a notebook paper tile.
13. Complete the wall with headlight bricks and plates.
14. Finish the ceiling with curved and straight tiles.
15. Arrange a flower display using circular plates and a transparent globe.
16. Set up a hook tile and circular plate near the bed.
17. Build a chair with a tile and circular plate.
18. Position cushions using stickered tiles.
19. Add a decorative stud and leaf bundle on the table.
20. Construct a trophy with cone, tile, and brick pieces.
21. If stickers weren't pre-placed, apply a circular sticker to a tile for a gold medal.
22. Complete the chair with plates and hooks.
23. Place wide chairs and a stair piece to build a seat.
24. Decorate with flowers and leaves throughout the room.
25. Attach a dog bone to the hook on the floor.
26. Assemble a cloud table with various elements.
27. Position the cloud table by the bed.
28. Create a vine with flowers and leaves on the ceiling.
29. Attach additional vines with flowers and leaves.
30. Connect the last vine to complete the floral arrangement.
31. Final step: Secure the vine to the wall and finish Aliya's Room. </s> |
<s>[INST] Generate LEGO instructions for building the Batmobile™ Pursuit set (76264) featuring Batman™ vs. The Joker™ from LEGO® DC. [/INST] LEGO Building Instructions:
1. Assemble Batman: torso on legs, cloth cape over neck stud, head, then mask. Batman can hold batarang.
2. Assemble Joker: torso on legs, head, green hairpiece. Joker can hold 1x2 tile with money print.
3. Build Car:
- Place black 6x16x2 base.
- Add dark gray 2x4 brick, yellow 1x6 bricks, red 2x2 brick, dark gray 1x3 brick, circular tile, red tile, flame piece, orange plates, ribbed circular bricks, bat logo tile, slope tile.
- Add brown slope brick, circular plate, triple curved wedge, bat wing, grille slope tile, tiles.
- Add slope tile with dashboard print, curved windscreen, more triple curved wedges, grille tiles.
- Attach rubber tires to yellow wheel hubs, then attach wheels to car.
4. Rotate car to have fins on the left.
5. Congratulations! Batmobile Pursuit: Batman vs. The Joker is complete! Thank you for building! </s> |
<s>[INST] Generate LEGO instructions for the Arctic Snowmobile set number 60032. [/INST] 1. Place a 2x1 flat LEGO piece on top of a 2x2 flat LEGO piece.
2. Attach a 6x2 flat LEGO piece horizontally to the left, hanging over.
3. Place a winged 2x2 flat LEGO piece on top, positioning the wings forward and backward, with cut-off corners on the left.
4. Add a 1x1 LEGO piece with a clasp to the left in the front row, with the clasp extending forward.
5. Repeat the previous step at the back.
6. Set this aside temporarily.
7. Create a part by stacking a 2x2 LEGO piece with wheels vertically, with cut-off corners on the left.
8. Place another 2x2 LEGO piece on top.
9. Add a 2x1/2x1 corner piece vertically to the left, with side buttons also on the left.
10. Attach a 1x1 wedge piece upright at the front side button.
11. Repeat on the back.
12. Connect this part to the structure by aligning the leftmost column of your structure with the right column of the part.
13. Place a 6x2 flat LEGO piece on top, starting from the left.
14. Stack two 3x2 LEGO pieces horizontally, skipping the leftmost column, on top of the previous step.
15. Attach a long frog piece horizontally to the three right columns, with the nose hanging over to the right.
16. Put a 2x1/2x1 curved frame horizontally on the left four columns, sliding to the left.
17. Flip the structure upside down and attach a 4x1 stepped curve upside down on the front four buttons, sliding to the left.
18. Repeat on the back.
19. Add a 2x1 piece with a hook upside down vertically at the rightmost column.
20. Place an FS 2x1 disk to the left.
21. Flip the structure upright and attach the skis with curves to the left at the wheel connectors.
22. Add a 2x1 flat LEGO piece on the third column from the left.
23. Place a 2x1 handle piece vertically on top of the frog piece, cut-off corners to the left.
24. Attach a 2x1 with one button vertically on the fourth column from the left.
25. Put a 1x1 clasp horizontally on top.
26. Add a handlebar piece vertically on top, with the ends to the right.
27. Attach a S 2x2 curved piece to the left, sliding to the left.
28. Place two 1x1 wedge pieces to the left, sliding to the left.
29. Attach a walkie-talkie and an ice pick to the clasps at the front and back.
30. Connect a button on a chain to the hook at the right end.
31. Set this aside temporarily.
32. Create another part by placing a 6x2 flat LEGO piece upside down on the table.
33. Attach a 2x1 with two handles vertically and upside down on the second column from the right, with handles to the left.
34. Repeat on the left side.
35. Flip the structure right side up.
36. Attach a 2x1 piece with a hook vertically at the leftmost column, with the hook extending to the left.
37. Place a crystal in the icebox, close it, and put it on the sledge.
38. Connect the other end of the chain to the hook.
39. Enjoy your creation! Thank you for building this LEGO set. </s> |
<s>[INST] Generate LEGO instructions for building a Spider-Trike vehicle and scene where Spider-Man uses the ejector seat to defeat Electro, including details like Electro hovering with electricity bolts under his feet and a stolen diamond, and the exclusive minifigures of Spider-Man and Electro with an accessory. [/INST] Bag 1:
1. Connect F 2x2 piece with attached connector to Christmas tree-stand piece.
2. Add two F 2x1 pieces with buttons side by side.
3. Insert four lightning pieces into Christmas tree-stand.
4. Place lightning piece in Electro's hand and on top.
Bag 2:
1. Place two 6x1 seesaw pieces vertically on table.
2. Connect 2x1 flat pieces front and back.
3. Attach dovetail piece to oblong piece and place on structure.
4. Create symmetrical part and add to previous piece.
5. Put F twelve-button pizza piece vertically.
6. Add F four-button piece with tube, F 2x1 piece, and place in structure.
7. Add F 2x1 grate piece to PP.
8. Put FS 4x2 phone receiver piece in the middle.
9. Insert connectors as specified.
10. Hold F 3x2 piece with tube and connect to structure.
Bag 2:
1. Place F 6x2 piece horizontally.
2. Add 2x2 hood piece.
3. Put F 2x1 piece vertically.
4. Attach clasp and 4x1 piece.
5. Repeat with F 4x1 piece.
6. Add 2x1/2x1 corner piece with cones.
7. Put two cone pieces.
8. Add 2x1 piece with tube at front and back.
9. Place S 2x1 mouthpiece and FS 2x1 curve piece.
10. Insert half-connectors into tubes.
11. Put bike handle into clasp and add oblong piece.
12. Install on top of structure.
13. Put rubbers on wheels.
14. Make flick-firing missiles and insert into oblong pieces.
15. Place Spiderman figure on seat. Enjoy! </s> |
<s>[INST] Generate LEGO instructions for LEGO Friends Horse Training 41746 set, designed for kids aged 4 and up. Includes a stable, Aliya and Mia mini-dolls, 2 horse characters, and various accessories for imaginative play. Experience the bond between Aliya and Mia over their shared love of horses. Utilize the LEGO Builder app for guidance. Set measurements: stable is 4.5 in. (12 cm) high, 7.5 in. (19 cm) wide, and 4.5 in. (11 cm) deep. Kit features jumps, horse care items, and detailed accessories. Ideal for young builders and makes a great gift. Total of 134 pieces and 93 building steps. [/INST] Building instructions:
1. Open bag 1 and minifigure group 1.
2. Assemble Aliya minifigure: torso on legs, head on torso, and helmet on head. Attach a carrot to one hand.
3. Build Wheelbarrow:
a. Place green wheelbarrow body with handles on the left.
b. Add small wheels to bottom left.
c. Attach yellow 1x2 brick with horizontal grooves on left column, followed by a red apple.
4. Build Activity Wheel:
a. Make the stand with tan 4x4 plate and purple 1x2 plate.
b. Add white bricks and plates as per instructions.
c. Build the wheel with white 4x4 circular brick and dish.
5. Build Viewing Platform:
a. Start with tan 6x6 plate.
b. Add white tiles and fences as directed.
c. Construct bench and add accessories.
6. Open bag 2 and minifigure group 2 to assemble Mia and place foal figure beside her.
7. Build Stables:
a. Start with green 8x16 base brick.
b. Follow instructions to build the stable structure with various colored plates and bricks.
8. Attach the viewing platform to the stables.
9. Open bag 3 and group 7 to build Adult Horse.
10. Build Accessory Rack:
a. Construct rack with purple and white bricks.
b. Add brushes, sponge, bottle, and other accessories.
11. Build Saddle and accessories:
a. Place teal saddle on brown circular brick.
b. Fill box with remaining horse accessories.
12. Proceed with the build as per instructions, skipping the step involving horse poop. Simplified LEGO building instructions:
Large Jump
1. Place light green 2x8 plate horizontally.
2. Add teal 1x2x2 slope bricks on back row.
3. Place white 1x6 plate on top.
4. Add white 1x2 tile in center.
5. Place purple 1x2 tiles on sides.
6. Add green 1x1 plate with leaves at the front.
7. Place pink 1x1 circular plate with flower pattern.
Small Jump
1. Place light green 2x8 plate horizontally.
2. Add orange 1x2 slope bricks on back row.
3. Place pink 1x1 circular plate to the right.
4. Add white 1x4 tile on slopes.
5. Place green 1x1 plate with leaves to the left.
6. Add pink 1x1 circular plate with flower pattern.
Congratulations on completing Horse Training! Thank you for building this set! </s> |
<s>[INST] Generate LEGO instructions for set 60370 Police Station Chase. The set includes a police station, police car, and crook's motorcycle, along with 2 police officers, 2 crook minifigures, and a police dog figure. The police station features a raisable barrier, office, and jail with a breakout function. The motorbike can be attached to activate the jailbreak function. When built, the police station measures over 4.5 in. (12 cm) high, 10 in. (26 cm) wide, and 4.5 in. (12 cm) deep. The set contains various accessories for imaginative play, such as a toy gem, police radio, jail key, cups, and a meg [/INST] Building Instructions (Bag 1, Book 1):
Group 1 - Robber Minifigure
1. Assemble the female robber with black pants, orange jacket over a striped shirt torso, yellow head, and blond hair.
2. Use the white helmet when she is on the motorcycle.
Group 2 - Motorcycle
3. Connect the red bike frame with smooth sides to the black motorcycle part with hooks.
4. Insert cylinders into tires to create wheels.
5. Attach wheels to the front and back of the motorcycle.
6. Add a light grey handlebar under the frame.
7. Add a hook and chain to the back of the motorcycle.
8. Place a black 1x2 curved tile on top of the hook and frame.
Group 3 - Jail
9. Place a light grey 8x8 plate with 4 gaps down.
10. Insert a bright yellow 1x4 plate horizontally.
11. Place bricks and bars to create the jail structure.
12. Add a red plate and a gold stud as accessories.
Building Instructions (Bag 2, Book 2):
Group 4 - Prisoner and Dog
1. Assemble the prisoner with white legs, striped torso, yellow head, and dark brown hair.
2. Place a pink diamond in the prisoner’s hand.
3. Add a dog beside the prisoner.
Group 5 - Gate
4. Construct the gate structure using plates, bricks, and ramp tiles.
5. Place brown circular plates as dog poops.
Group 6 - Gate
6. Add bricks and plates to complete the gate structure.
Group 7 - Gate
7. Place red tiles on the white plate to finish the gate design.
Group 8 - Gate
8. Attach a white tile with buttons and a light grey plate with a hole to create the gate mechanism.
Building Instructions (Bag 3, Book 3):
Group 9 - Police Officer
1. Assemble the police officer with dark blue legs, light blue torso, yellow head, and black hair.
2. Equip the officer with a megaphone and a key.
Group 10 - Monitor Room
3. Create the monitor room using plates, bricks, and a window frame.
4. Add a chair and accessories like a croissant and a bone.
Group 11 - Monitor Room
5. Complete the monitor room with additional bricks and tiles.
Building Instructions (Bag 4, Book 4):
Group 12 - Police Officer
1. Assemble the police officer with dark blue legs, light blue torso, yellow head, and black hair.
2. Place a red megaphone in her hand.
Group 13 - Car
3. Construct the car base with red and blue tiles.
4. Attach wheels to the car base.
Group 14 - Car
5. Add details like lights, steering wheel, and plates to the car.
Group 15 - Car
6. Complete the car with additional plates, tiles, and windshield. 1. Place the grill tile on the left side of the baseplate.
2. Next to the grill tile, place the windshield facing left.
3. On top of the windshield, place the transparent blue 1x4 tile.
4. Congratulations! The police car is complete.
5. Now assemble the gate, jail, and monitor room. Place the gate in the middle, the jail to the left, and the monitor room to the right.
6. For stability, add pegs to the 3 holes in the 1x4 bricks on the sides of each part and connect them. </s> |
<s>[INST] Please create LEGO instructions for the 20-piece set "10966 Duplo Bath Time Fun - Floating Animal Island." The set features 4 bathtub animals: a fish, octopus, lion, and flamingo, with activities on and around the floating island. Suitable for kids aged 18 months and up, it includes a bucket for various play options and a floating ring that opens for easy cleaning. After bath time, store the animals inside the island. Mix and match animals and rings for endless fun, enhancing toddlers' motor skills, imagination, and creativity. The island is over 8.5 inches (22 cm) wide and can connect with sets 10964 and 10965. The box displays the animals floating in a bathtub. A [/INST] Let's start by building the lion:
1. Attach the brown lion's head without studs to a yellow 2x2 curved brick with lion paw prints.
Next, let's create the fish:
1. Place a yellow 2x4 curved brick horizontally for the fish's tail.
2. Stack a blue inverted 2x4 curved brick with scales, followed by a blue 2x4 curved brick with more scales, and a light blue 2x4 curved brick with eyes.
Now, onto the flamingo:
1. Stack a pink 2x2 brick and a pink 2x4 curved inverted brick.
2. Add a pink 2x3 curved brick with wings on the left and another pink 2x3 curved brick with eyes on the right.
Let's make the octopus:
1. Place a printed light green 2x4 brick with tentacles horizontally.
2. Add an oval 2x4 brick with a round mouth on top.
Lastly, build the tree:
1. Stack a 2x2 brown brick with a tall brown 2x2 cylinder on top.
2. Add a light green 4x2 curved brick in the middle, extending left and right, and another one on top.
The set includes a life-preserver to fill with water and a cup to place on top. Enjoy your completed set! Thank you for building with us! </s> |
<s>[INST] Generate LEGO instructions for building the LEGO Jurassic World Velociraptor Escape (76957) set, designed for ages 4 and up. The set includes a dinosaur pen with a tower, breakout function, and winch for the Velociraptor figure, as well as a buildable off-roader vehicle, 2 minifigures (Dr. Ellie Sattler and Robert Muldoon), and accessory elements. The digital instructions are pictorial and user-friendly, suitable for young builders. The set is a perfect gift idea for kids, with playful features inspired by the iconic Jurassic Park scene. [/INST] LEGO Building Instructions:
1. **Velociraptor Build**
a. Attach arms and legs to the raptor body.
b. Insert a pin into the neck hole.
c. Attach the head with the mouth on the left.
2. **Guard Tower with Destroyable Wall**
a. Build the base with specific brick placements.
b. Add the side walls and back wall with a door frame.
3. **Robert Muldoon Minifigure**
a. Assemble the minifigure and tranquilizer gun.
4. **Guard Tower Second Level**
a. Create the control station and roof of the tower.
5. **Chain and Bucket Mechanism**
a. Attach the chain and drum to the tower for raising and lowering.
6. **Dinosaur Nest with Egg**
a. Place egg on a plate to create the nest.
7. **Dr. Ellie Sattler Minifigure**
a. Assemble Dr. Sattler with a walkie-talkie.
8. **ATV Build**
a. Construct the ATV with specific plate placements. 1. Place a light gray 1x2 grille tile on the bottom row of side studs on the left side of the ATV.
2. Place a transparent yellow 1x2 tile on the side studs above the previous piece.
3. Place a tan hot dog bun on the stud between the mudguards on the right side of the ATV.
4. Place a red hot dog into the hot dog bun.
5. Make four wheels by pushing light gray wheel hubs into black rubber tires, then install a wheel on each of the four wheel pegs to complete the ATV.
6. For the Electric fence:
a. Place a light green 2x8 plate horizontally.
b. Place a tan 1x2 brick with a vertical bar on the right two studs on the back row of the previous piece.
c. Place a tan 1x2 masonry brick in front of the previous piece.
d. Place a tan 2x6 brick to the left of the previous pieces.
e. Place light gray 2x2x2 tall slope bricks on the specified columns with a one-stud gap between each.
f. Place a light gray 1x8 brick on the previous three pieces.
g. Place a dark blue 1x6 plate with a fence and a yellow 1x2 plate with four studs hanging down on the previous piece.
h. Place a yellow 2x2 tile with an electricity warning sign print on the side studs of the previous piece.
7. Assemble the guard tower and electric fence as instructed, ensuring the electric fence is attached correctly. Dr. Sattler can drive the ATV to view dinosaur eggs while Robert Muldoon watches from the tower. Congratulations on completing the Velociraptor Escape set! </s> |
End of preview. Expand
in Data Studio
README.md exists but content is empty.
- Downloads last month
- 51