Datasets:

Zellic
/

smart-contract-fiesta

	{
	"language": "Solidity",
	"sources": {
	"contracts/Silo.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\nimport \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\n\nimport \"./interfaces/ISilo.sol\";\n\nimport \"./lib/EasyMath.sol\";\nimport \"./BaseSilo.sol\";\n\n/// @title Silo\n/// @notice Silo is the main component of the protocol. It implements lending logic, manages and isolates\n/// risk, acts as a vault for assets, and performs liquidations. Each Silo is composed of the unique asset\n/// for which it was created (ie. UNI) and bridge assets (ie. ETH and SiloDollar). There may be multiple\n/// bridge assets at any given time.\n/// @dev Main Silo contact that inherits from Base contract. It implements all user/UI facing methods.\n/// @custom:security-contact [email protected]\ncontract Silo is ISilo, BaseSilo {\n using SafeERC20 for ERC20;\n using EasyMath for uint256;\n\n constructor (ISiloRepository _repository, address _siloAsset, uint128 _version)\n BaseSilo(_repository, _siloAsset, _version)\n {\n // initial setup is done in BaseSilo, nothing to do here\n }\n\n /// @inheritdoc ISilo\n function deposit(address _asset, uint256 _amount, bool _collateralOnly)\n external\n override\n returns (uint256 collateralAmount, uint256 collateralShare)\n {\n return _deposit(_asset, msg.sender, msg.sender, _amount, _collateralOnly);\n }\n\n /// @inheritdoc ISilo\n function depositFor(\n address _asset,\n address _depositor,\n uint256 _amount,\n bool _collateralOnly\n )\n external\n override\n returns (uint256 collateralAmount, uint256 collateralShare)\n {\n return _deposit(_asset, msg.sender, _depositor, _amount, _collateralOnly);\n }\n\n /// @inheritdoc ISilo\n function withdraw(address _asset, uint256 _amount, bool _collateralOnly)\n external\n override\n returns (uint256 withdrawnAmount, uint256 withdrawnShare)\n {\n return _withdraw(_asset, msg.sender, msg.sender, _amount, _collateralOnly);\n }\n\n /// @inheritdoc ISilo\n function withdrawFor(address _asset, address _depositor, address _receiver, uint256 _amount, bool _collateralOnly)\n external\n override\n onlyRouter\n returns (uint256 withdrawnAmount, uint256 withdrawnShare)\n {\n return _withdraw(_asset, _depositor, _receiver, _amount, _collateralOnly);\n }\n\n /// @inheritdoc ISilo\n function borrow(address _asset, uint256 _amount) external override returns (uint256 debtAmount, uint256 debtShare) {\n return _borrow(_asset, msg.sender, msg.sender, _amount);\n }\n\n /// @inheritdoc ISilo\n function borrowFor(address _asset, address _borrower, address _receiver, uint256 _amount)\n external\n override\n onlyRouter\n returns (uint256 debtAmount, uint256 debtShare)\n {\n return _borrow(_asset, _borrower, _receiver, _amount);\n }\n\n /// @inheritdoc ISilo\n function repay(address _asset, uint256 _amount)\n external\n override\n returns (uint256 repaidAmount, uint256 repaidShare)\n {\n return _repay(_asset, msg.sender, msg.sender, _amount);\n }\n\n /// @inheritdoc ISilo\n function repayFor(address _asset, address _borrower, uint256 _amount)\n external\n override\n returns (uint256 repaidAmount, uint256 repaidShare)\n {\n return _repay(_asset, _borrower, msg.sender, _amount);\n }\n\n /// @inheritdoc ISilo\n function flashLiquidate(address[] memory _users, bytes memory _flashReceiverData)\n external\n override\n returns (\n address[] memory assets,\n uint256[][] memory receivedCollaterals,\n uint256[][] memory shareAmountsToRepay\n )\n {\n assets = getAssets();\n uint256 usersLength = _users.length;\n receivedCollaterals = new uint256[][](usersLength);\n shareAmountsToRepay = new uint256[][](usersLength);\n\n for (uint256 i = 0; i < usersLength; i++) {\n (\n receivedCollaterals[i],\n shareAmountsToRepay[i]\n ) = _userLiquidation(assets, _users[i], IFlashLiquidationReceiver(msg.sender), _flashReceiverData);\n }\n }\n\n /// @inheritdoc ISilo\n function harvestProtocolFees() external override returns (uint256[] memory harvestedAmounts) {\n address[] memory assets = getAssets();\n harvestedAmounts = new uint256[](assets.length);\n\n address repositoryOwner = siloRepository.owner();\n\n for (uint256 i; i < assets.length;) {\n unchecked {\n // it will not overflow because fee is much lower than any other amounts\n harvestedAmounts[i] = _harvestProtocolFees(assets[i], repositoryOwner);\n // we run out of gas before we overflow i\n i++;\n }\n }\n }\n\n /// @inheritdoc ISilo\n function accrueInterest(address _asset) public override returns (uint256 interest) {\n return _accrueInterest(_asset);\n }\n}\n"
	},
	"@openzeppelin/contracts/token/ERC20/ERC20.sol": {
	"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/ERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"./IERC20.sol\";\nimport \"./extensions/IERC20Metadata.sol\";\nimport \"../../utils/Context.sol\";\n\n/*\n @dev Implementation of the {IERC20} interface.\n \n This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n * For a generic mechanism see {ERC20PresetMinterPauser}.\n \n TIP: For a detailed writeup see our guide\n * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n \n We have followed general OpenZeppelin Contracts guidelines: functions revert\n * instead returning `false` on failure. This behavior is nonetheless\n * conventional and does not conflict with the expectations of ERC20\n * applications.\n \n Additionally, an {Approval} event is emitted on calls to {transferFrom}.\n * This allows applications to reconstruct the allowance for all accounts just\n * by listening to said events. Other implementations of the EIP may not emit\n * these events, as it isn't required by the specification.\n \n Finally, the non-standard {decreaseAllowance} and {increaseAllowance}\n * functions have been added to mitigate the well-known issues around setting\n * allowances. See {IERC20-approve}.\n /\ncontract ERC20 is Context, IERC20, IERC20Metadata {\n mapping(address => uint256) private _balances;\n\n mapping(address => mapping(address => uint256)) private _allowances;\n\n uint256 private _totalSupply;\n\n string private _name;\n string private _symbol;\n\n /\n @dev Sets the values for {name} and {symbol}.\n \n The default value of {decimals} is 18. To select a different value for\n * {decimals} you should overload it.\n \n All two of these values are immutable: they can only be set once during\n * construction.\n /\n constructor(string memory name_, string memory symbol_) {\n _name = name_;\n _symbol = symbol_;\n }\n\n /\n @dev Returns the name of the token.\n /\n function name() public view virtual override returns (string memory) {\n return _name;\n }\n\n /\n @dev Returns the symbol of the token, usually a shorter version of the\n * name.\n /\n function symbol() public view virtual override returns (string memory) {\n return _symbol;\n }\n\n /\n @dev Returns the number of decimals used to get its user representation.\n * For example, if `decimals` equals `2`, a balance of `505` tokens should\n * be displayed to a user as `5.05` (`505 / 10 ** 2`).\n \n Tokens usually opt for a value of 18, imitating the relationship between\n * Ether and Wei. This is the value {ERC20} uses, unless this function is\n * overridden;\n \n NOTE: This information is only used for _display_ purposes: it in\n * no way affects any of the arithmetic of the contract, including\n * {IERC20-balanceOf} and {IERC20-transfer}.\n /\n function decimals() public view virtual override returns (uint8) {\n return 18;\n }\n\n /\n @dev See {IERC20-totalSupply}.\n /\n function totalSupply() public view virtual override returns (uint256) {\n return _totalSupply;\n }\n\n /\n @dev See {IERC20-balanceOf}.\n /\n function balanceOf(address account) public view virtual override returns (uint256) {\n return _balances[account];\n }\n\n /\n @dev See {IERC20-transfer}.\n \n Requirements:\n \n - `recipient` cannot be the zero address.\n * - the caller must have a balance of at least `amount`.\n /\n function transfer(address recipient, uint256 amount) public virtual override returns (bool) {\n _transfer(_msgSender(), recipient, amount);\n return true;\n }\n\n /\n @dev See {IERC20-allowance}.\n /\n function allowance(address owner, address spender) public view virtual override returns (uint256) {\n return _allowances[owner][spender];\n }\n\n /\n @dev See {IERC20-approve}.\n \n Requirements:\n \n - `spender` cannot be the zero address.\n /\n function approve(address spender, uint256 amount) public virtual override returns (bool) {\n _approve(_msgSender(), spender, amount);\n return true;\n }\n\n /\n @dev See {IERC20-transferFrom}.\n \n Emits an {Approval} event indicating the updated allowance. This is not\n * required by the EIP. See the note at the beginning of {ERC20}.\n \n Requirements:\n \n - `sender` and `recipient` cannot be the zero address.\n * - `sender` must have a balance of at least `amount`.\n * - the caller must have allowance for ``sender``'s tokens of at least\n * `amount`.\n /\n function transferFrom(\n address sender,\n address recipient,\n uint256 amount\n ) public virtual override returns (bool) {\n _transfer(sender, recipient, amount);\n\n uint256 currentAllowance = _allowances[sender][_msgSender()];\n require(currentAllowance >= amount, \"ERC20: transfer amount exceeds allowance\");\n unchecked {\n _approve(sender, _msgSender(), currentAllowance - amount);\n }\n\n return true;\n }\n\n /\n @dev Atomically increases the allowance granted to `spender` by the caller.\n \n This is an alternative to {approve} that can be used as a mitigation for\n * problems described in {IERC20-approve}.\n \n Emits an {Approval} event indicating the updated allowance.\n \n Requirements:\n \n - `spender` cannot be the zero address.\n /\n function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {\n _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);\n return true;\n }\n\n /\n @dev Atomically decreases the allowance granted to `spender` by the caller.\n \n This is an alternative to {approve} that can be used as a mitigation for\n * problems described in {IERC20-approve}.\n \n Emits an {Approval} event indicating the updated allowance.\n \n Requirements:\n \n - `spender` cannot be the zero address.\n * - `spender` must have allowance for the caller of at least\n * `subtractedValue`.\n /\n function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {\n uint256 currentAllowance = _allowances[_msgSender()][spender];\n require(currentAllowance >= subtractedValue, \"ERC20: decreased allowance below zero\");\n unchecked {\n _approve(_msgSender(), spender, currentAllowance - subtractedValue);\n }\n\n return true;\n }\n\n /\n @dev Moves `amount` of tokens from `sender` to `recipient`.\n \n This internal function is equivalent to {transfer}, and can be used to\n * e.g. implement automatic token fees, slashing mechanisms, etc.\n \n Emits a {Transfer} event.\n \n Requirements:\n \n - `sender` cannot be the zero address.\n * - `recipient` cannot be the zero address.\n * - `sender` must have a balance of at least `amount`.\n /\n function _transfer(\n address sender,\n address recipient,\n uint256 amount\n ) internal virtual {\n require(sender != address(0), \"ERC20: transfer from the zero address\");\n require(recipient != address(0), \"ERC20: transfer to the zero address\");\n\n _beforeTokenTransfer(sender, recipient, amount);\n\n uint256 senderBalance = _balances[sender];\n require(senderBalance >= amount, \"ERC20: transfer amount exceeds balance\");\n unchecked {\n _balances[sender] = senderBalance - amount;\n }\n _balances[recipient] += amount;\n\n emit Transfer(sender, recipient, amount);\n\n _afterTokenTransfer(sender, recipient, amount);\n }\n\n /* @dev Creates `amount` tokens and assigns them to `account`, increasing\n * the total supply.\n \n Emits a {Transfer} event with `from` set to the zero address.\n \n Requirements:\n \n - `account` cannot be the zero address.\n /\n function _mint(address account, uint256 amount) internal virtual {\n require(account != address(0), \"ERC20: mint to the zero address\");\n\n _beforeTokenTransfer(address(0), account, amount);\n\n _totalSupply += amount;\n _balances[account] += amount;\n emit Transfer(address(0), account, amount);\n\n _afterTokenTransfer(address(0), account, amount);\n }\n\n /\n @dev Destroys `amount` tokens from `account`, reducing the\n * total supply.\n \n Emits a {Transfer} event with `to` set to the zero address.\n \n Requirements:\n \n - `account` cannot be the zero address.\n * - `account` must have at least `amount` tokens.\n /\n function _burn(address account, uint256 amount) internal virtual {\n require(account != address(0), \"ERC20: burn from the zero address\");\n\n _beforeTokenTransfer(account, address(0), amount);\n\n uint256 accountBalance = _balances[account];\n require(accountBalance >= amount, \"ERC20: burn amount exceeds balance\");\n unchecked {\n _balances[account] = accountBalance - amount;\n }\n _totalSupply -= amount;\n\n emit Transfer(account, address(0), amount);\n\n _afterTokenTransfer(account, address(0), amount);\n }\n\n /\n @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.\n \n This internal function is equivalent to `approve`, and can be used to\n * e.g. set automatic allowances for certain subsystems, etc.\n \n Emits an {Approval} event.\n \n Requirements:\n \n - `owner` cannot be the zero address.\n * - `spender` cannot be the zero address.\n /\n function _approve(\n address owner,\n address spender,\n uint256 amount\n ) internal virtual {\n require(owner != address(0), \"ERC20: approve from the zero address\");\n require(spender != address(0), \"ERC20: approve to the zero address\");\n\n _allowances[owner][spender] = amount;\n emit Approval(owner, spender, amount);\n }\n\n /\n @dev Hook that is called before any transfer of tokens. This includes\n * minting and burning.\n \n Calling conditions:\n \n - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens\n * will be transferred to `to`.\n * - when `from` is zero, `amount` tokens will be minted for `to`.\n * - when `to` is zero, `amount` of ``from``'s tokens will be burned.\n * - `from` and `to` are never both zero.\n \n To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n /\n function _beforeTokenTransfer(\n address from,\n address to,\n uint256 amount\n ) internal virtual {}\n\n /\n @dev Hook that is called after any transfer of tokens. This includes\n * minting and burning.\n \n Calling conditions:\n \n - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens\n * has been transferred to `to`.\n * - when `from` is zero, `amount` tokens have been minted for `to`.\n * - when `to` is zero, `amount` of ``from``'s tokens have been burned.\n * - `from` and `to` are never both zero.\n \n To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\n */\n function _afterTokenTransfer(\n address from,\n address to,\n uint256 amount\n ) internal virtual {}\n}\n"
	},
	"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
	"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20.sol\";\nimport \"../../../utils/Address.sol\";\n\n/*\n @title SafeERC20\n * @dev Wrappers around ERC20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n /\nlibrary SafeERC20 {\n using Address for address;\n\n function safeTransfer(\n IERC20 token,\n address to,\n uint256 value\n ) internal {\n _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));\n }\n\n function safeTransferFrom(\n IERC20 token,\n address from,\n address to,\n uint256 value\n ) internal {\n _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));\n }\n\n /\n @dev Deprecated. This function has issues similar to the ones found in\n * {IERC20-approve}, and its usage is discouraged.\n \n Whenever possible, use {safeIncreaseAllowance} and\n * {safeDecreaseAllowance} instead.\n /\n function safeApprove(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n // safeApprove should only be called when setting an initial allowance,\n // or when resetting it to zero. To increase and decrease it, use\n // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'\n require(\n (value == 0) \|\| (token.allowance(address(this), spender) == 0),\n \"SafeERC20: approve from non-zero to non-zero allowance\"\n );\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));\n }\n\n function safeIncreaseAllowance(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n uint256 newAllowance = token.allowance(address(this), spender) + value;\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n }\n\n function safeDecreaseAllowance(\n IERC20 token,\n address spender,\n uint256 value\n ) internal {\n unchecked {\n uint256 oldAllowance = token.allowance(address(this), spender);\n require(oldAllowance >= value, \"SafeERC20: decreased allowance below zero\");\n uint256 newAllowance = oldAllowance - value;\n _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));\n }\n }\n\n /\n @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement\n * on the return value: the return value is optional (but if data is returned, it must not be false).\n * @param token The token targeted by the call.\n * @param data The call data (encoded using abi.encode or one of its variants).\n */\n function _callOptionalReturn(IERC20 token, bytes memory data) private {\n // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since\n // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that\n // the target address contains contract code and also asserts for success in the low-level call.\n\n bytes memory returndata = address(token).functionCall(data, \"SafeERC20: low-level call failed\");\n if (returndata.length > 0) {\n // Return data is optional\n require(abi.decode(returndata, (bool)), \"SafeERC20: ERC20 operation did not succeed\");\n }\n }\n}\n"
	},
	"contracts/interfaces/ISilo.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\nimport \"./IBaseSilo.sol\";\n\ninterface ISilo is IBaseSilo {\n /// @notice Deposit `_amount` of `_asset` tokens from `msg.sender` to the Silo\n /// @param _asset The address of the token to deposit\n /// @param _amount The amount of the token to deposit\n /// @param _collateralOnly True if depositing collateral only\n /// @return collateralAmount deposited amount\n /// @return collateralShare user collateral shares based on deposited amount\n function deposit(address _asset, uint256 _amount, bool _collateralOnly)\n external\n returns (uint256 collateralAmount, uint256 collateralShare);\n\n /// @notice Router function to deposit `_amount` of `_asset` tokens to the Silo for the `_depositor`\n /// @param _asset The address of the token to deposit\n /// @param _depositor The address of the recipient of collateral tokens\n /// @param _amount The amount of the token to deposit\n /// @param _collateralOnly True if depositing collateral only\n /// @return collateralAmount deposited amount\n /// @return collateralShare `_depositor` collateral shares based on deposited amount\n function depositFor(address _asset, address _depositor, uint256 _amount, bool _collateralOnly)\n external\n returns (uint256 collateralAmount, uint256 collateralShare);\n\n /// @notice Withdraw `_amount` of `_asset` tokens from the Silo to `msg.sender`\n /// @param _asset The address of the token to withdraw\n /// @param _amount The amount of the token to withdraw\n /// @param _collateralOnly True if withdrawing collateral only deposit\n /// @return withdrawnAmount withdrawn amount that was transferred to user\n /// @return withdrawnShare burned share based on `withdrawnAmount`\n function withdraw(address _asset, uint256 _amount, bool _collateralOnly)\n external\n returns (uint256 withdrawnAmount, uint256 withdrawnShare);\n\n /// @notice Router function to withdraw `_amount` of `_asset` tokens from the Silo for the `_depositor`\n /// @param _asset The address of the token to withdraw\n /// @param _depositor The address that originally deposited the collateral tokens being withdrawn,\n /// it should be the one initiating the withdrawal through the router\n /// @param _receiver The address that will receive the withdrawn tokens\n /// @param _amount The amount of the token to withdraw\n /// @param _collateralOnly True if withdrawing collateral only deposit\n /// @return withdrawnAmount withdrawn amount that was transferred to `_receiver`\n /// @return withdrawnShare burned share based on `withdrawnAmount`\n function withdrawFor(\n address _asset,\n address _depositor,\n address _receiver,\n uint256 _amount,\n bool _collateralOnly\n ) external returns (uint256 withdrawnAmount, uint256 withdrawnShare);\n\n /// @notice Borrow `_amount` of `_asset` tokens from the Silo to `msg.sender`\n /// @param _asset The address of the token to borrow\n /// @param _amount The amount of the token to borrow\n /// @return debtAmount borrowed amount\n /// @return debtShare user debt share based on borrowed amount\n function borrow(address _asset, uint256 _amount) external returns (uint256 debtAmount, uint256 debtShare);\n\n /// @notice Router function to borrow `_amount` of `_asset` tokens from the Silo for the `_receiver`\n /// @param _asset The address of the token to borrow\n /// @param _borrower The address that will take the loan,\n /// it should be the one initiating the borrowing through the router\n /// @param _receiver The address of the asset receiver\n /// @param _amount The amount of the token to borrow\n /// @return debtAmount borrowed amount\n /// @return debtShare `_receiver` debt share based on borrowed amount\n function borrowFor(address _asset, address _borrower, address _receiver, uint256 _amount)\n external\n returns (uint256 debtAmount, uint256 debtShare);\n\n /// @notice Repay `_amount` of `_asset` tokens from `msg.sender` to the Silo\n /// @param _asset The address of the token to repay\n /// @param _amount amount of asset to repay, includes interests\n /// @return repaidAmount amount repaid\n /// @return burnedShare burned debt share\n function repay(address _asset, uint256 _amount) external returns (uint256 repaidAmount, uint256 burnedShare);\n\n /// @notice Allows to repay in behalf of borrower to execute liquidation\n /// @param _asset The address of the token to repay\n /// @param _borrower The address of the user to have debt tokens burned\n /// @param _amount amount of asset to repay, includes interests\n /// @return repaidAmount amount repaid\n /// @return burnedShare burned debt share\n function repayFor(address _asset, address _borrower, uint256 _amount)\n external\n returns (uint256 repaidAmount, uint256 burnedShare);\n\n /// @dev harvest protocol fees from an array of assets\n /// @return harvestedAmounts amount harvested during tx execution for each of silo asset\n function harvestProtocolFees() external returns (uint256[] memory harvestedAmounts);\n\n /// @notice Function to update interests for `_asset` token since the last saved state\n /// @param _asset The address of the token to be updated\n /// @return interest accrued interest\n function accrueInterest(address _asset) external returns (uint256 interest);\n\n /// @notice this methods does not requires to have tokens in order to liquidate user\n /// @dev during liquidation process, msg.sender will be notified once all collateral will be send to him\n /// msg.sender needs to be `IFlashLiquidationReceiver`\n /// @param _users array of users to liquidate\n /// @param _flashReceiverData this data will be forward to msg.sender on notification\n /// @return assets array of all processed assets (collateral + debt, including removed)\n /// @return receivedCollaterals receivedCollaterals[userId][assetId] => amount\n /// amounts of collaterals send to `_flashReceiver`\n /// @return shareAmountsToRepaid shareAmountsToRepaid[userId][assetId] => amount\n /// required amounts of debt to be repaid\n function flashLiquidate(address[] memory _users, bytes memory _flashReceiverData)\n external\n returns (\n address[] memory assets,\n uint256[][] memory receivedCollaterals,\n uint256[][] memory shareAmountsToRepaid\n );\n}\n"
	},
	"contracts/lib/EasyMath.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\nlibrary EasyMath {\n error ZeroAssets();\n error ZeroShares();\n\n function toShare(uint256 amount, uint256 totalAmount, uint256 totalShares) internal pure returns (uint256) {\n if (totalShares == 0 \|\| totalAmount == 0) {\n return amount;\n }\n\n uint256 result = amount * totalShares / totalAmount;\n\n // Prevent rounding error\n if (result == 0 && amount != 0) {\n revert ZeroShares();\n }\n\n return result;\n }\n\n function toShareRoundUp(uint256 amount, uint256 totalAmount, uint256 totalShares) internal pure returns (uint256) {\n if (totalShares == 0 \|\| totalAmount == 0) {\n return amount;\n }\n\n uint256 numerator = amount * totalShares;\n uint256 result = numerator / totalAmount;\n \n // Round up\n if (numerator % totalAmount != 0) {\n result += 1;\n }\n\n return result;\n }\n\n function toAmount(uint256 share, uint256 totalAmount, uint256 totalShares) internal pure returns (uint256) {\n if (totalShares == 0 \|\| totalAmount == 0) {\n return 0;\n }\n\n uint256 result = share * totalAmount / totalShares;\n\n // Prevent rounding error\n if (result == 0 && share != 0) {\n revert ZeroAssets();\n }\n\n return result;\n }\n\n function toAmountRoundUp(uint256 share, uint256 totalAmount, uint256 totalShares) internal pure returns (uint256) {\n if (totalShares == 0 \|\| totalAmount == 0) {\n return 0;\n }\n\n uint256 numerator = share * totalAmount;\n uint256 result = numerator / totalShares;\n \n // Round up\n if (numerator % totalShares != 0) {\n result += 1;\n }\n\n return result;\n }\n\n function toValue(uint256 _assetAmount, uint256 _assetPrice, uint256 _assetDecimals)\n internal\n pure\n returns (uint256)\n {\n return _assetAmount * _assetPrice / 10 ** _assetDecimals;\n }\n\n function sum(uint256[] memory _numbers) internal pure returns (uint256 s) {\n for(uint256 i; i < _numbers.length; i++) {\n s += _numbers[i];\n }\n }\n\n /// @notice Calculates fraction between borrowed and deposited amount of tokens denominated in percentage\n /// @dev It assumes `_dp` = 100%.\n /// @param _dp decimal points used by model\n /// @param _totalDeposits current total deposits for assets\n /// @param _totalBorrowAmount current total borrows for assets\n /// @return utilization value\n function calculateUtilization(uint256 _dp, uint256 _totalDeposits, uint256 _totalBorrowAmount)\n internal\n pure\n returns (uint256)\n {\n if (_totalDeposits == 0 \|\| _totalBorrowAmount == 0) return 0;\n\n return _totalBorrowAmount * _dp / _totalDeposits;\n }\n}\n"
	},
	"contracts/BaseSilo.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\nimport \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport \"@openzeppelin/contracts/security/ReentrancyGuard.sol\";\n\nimport \"./utils/LiquidationReentrancyGuard.sol\";\n\nimport \"./interfaces/IBaseSilo.sol\";\nimport \"./interfaces/IGuardedLaunch.sol\";\nimport \"./interfaces/ISiloRepository.sol\";\nimport \"./interfaces/IPriceProvidersRepository.sol\";\nimport \"./interfaces/IInterestRateModel.sol\";\nimport \"./interfaces/IShareToken.sol\";\n\nimport \"./lib/Ping.sol\";\nimport \"./lib/EasyMath.sol\";\nimport \"./lib/TokenHelper.sol\";\nimport \"./lib/Solvency.sol\";\n\n/// @title BaseSilo\n/// @dev Base contract for Silo core logic.\n/// @custom:security-contact [email protected]\nabstract contract BaseSilo is IBaseSilo, ReentrancyGuard, LiquidationReentrancyGuard {\n using SafeERC20 for ERC20;\n using EasyMath for uint256;\n\n ISiloRepository immutable public override siloRepository;\n\n // asset address for which Silo was created\n address public immutable siloAsset;\n\n /// @dev version of silo\n /// @notice It tells us which `SiloRepository.siloFactory(version)` created this Silo\n uint128 public immutable VERSION; // solhint-disable-line var-name-mixedcase\n\n // solhint-disable-next-line var-name-mixedcase\n uint256 private immutable _ASSET_DECIMAL_POINTS;\n\n /// @dev stores all synced assets (bridge assets + removed bridge assets + siloAsset)\n address[] private _allSiloAssets;\n\n /// @dev asset => AssetStorage\n mapping(address => AssetStorage) private _assetStorage;\n\n /// @dev asset => AssetInterestData\n mapping(address => AssetInterestData) private _interestData;\n\n error AssetDoesNotExist();\n error BorrowNotPossible();\n error DepositNotPossible();\n error DepositsExceedLimit();\n error InvalidRepository();\n error InvalidSiloVersion();\n error MaximumLTVReached();\n error NotEnoughLiquidity();\n error NotEnoughDeposits();\n error NotSolvent();\n error OnlyRouter();\n error Paused();\n error UnexpectedEmptyReturn();\n error UserIsZero();\n\n modifier onlyExistingAsset(address _asset) {\n if (_interestData[_asset].status == AssetStatus.Undefined) {\n revert AssetDoesNotExist();\n }\n\n _;\n }\n\n modifier onlyRouter() {\n if (msg.sender != siloRepository.router()) revert OnlyRouter();\n\n _;\n }\n\n modifier validateMaxDepositsAfter(address _asset) {\n _;\n\n IPriceProvidersRepository priceProviderRepo = siloRepository.priceProvidersRepository();\n\n AssetStorage storage _assetState = _assetStorage[_asset];\n uint256 allDeposits = _assetState.totalDeposits + _assetState.collateralOnlyDeposits;\n\n if (\n priceProviderRepo.getPrice(_asset) * allDeposits / (10 IERC20Metadata(_asset).decimals()) >\n IGuardedLaunch(address(siloRepository)).getMaxSiloDepositsValue(address(this), _asset)\n ) {\n revert DepositsExceedLimit();\n }\n }\n\n constructor (ISiloRepository _repository, address _siloAsset, uint128 _version) {\n if (!Ping.pong(_repository.siloRepositoryPing)) revert InvalidRepository();\n if (_version == 0) revert InvalidSiloVersion();\n\n uint256 decimals = TokenHelper.assertAndGetDecimals(_siloAsset);\n\n VERSION = _version;\n siloRepository = _repository;\n siloAsset = _siloAsset;\n _ASSET_DECIMAL_POINTS = 10decimals;\n }\n\n /// @dev this is exposed only for test purposes, but it is safe to leave it like that\n function initAssetsTokens() external nonReentrant {\n _initAssetsTokens();\n }\n\n /// @inheritdoc IBaseSilo\n function syncBridgeAssets() external override nonReentrant {\n // sync removed assets\n address[] memory removedBridgeAssets = siloRepository.getRemovedBridgeAssets();\n\n for (uint256 i = 0; i < removedBridgeAssets.length; i++) {\n // If removed bridge asset is the silo asset for this silo, do not remove it\n address removedBridgeAsset = removedBridgeAssets[i];\n if (removedBridgeAsset != siloAsset) {\n _interestData[removedBridgeAsset].status = AssetStatus.Removed;\n emit AssetStatusUpdate(removedBridgeAsset, AssetStatus.Removed);\n }\n }\n\n // must be called at the end, because we overriding `_assetStorage[removedBridgeAssets[i]].removed`\n _initAssetsTokens();\n }\n\n /// @inheritdoc IBaseSilo\n function assetStorage(address _asset) external view override returns (AssetStorage memory) {\n return _assetStorage[_asset];\n }\n\n /// @inheritdoc IBaseSilo\n function interestData(address _asset) external view override returns (AssetInterestData memory) {\n return _interestData[_asset];\n }\n\n /// @inheritdoc IBaseSilo\n function utilizationData(address _asset) external view override returns (UtilizationData memory data) {\n AssetStorage storage _assetState = _assetStorage[_asset];\n\n return UtilizationData(\n _assetState.totalDeposits,\n _assetState.totalBorrowAmount,\n _interestData[_asset].interestRateTimestamp\n );\n }\n\n /// @inheritdoc IBaseSilo\n function getAssets() public view override returns (address[] memory assets) {\n return _allSiloAssets;\n }\n\n /// @inheritdoc IBaseSilo\n function getAssetsWithState() public view override returns (\n address[] memory assets,\n AssetStorage[] memory assetsStorage\n ) {\n assets = _allSiloAssets;\n assetsStorage = new AssetStorage[](assets.length);\n\n for (uint256 i = 0; i < assets.length; i++) {\n assetsStorage[i] = _assetStorage[assets[i]];\n }\n }\n\n /// @inheritdoc IBaseSilo\n function isSolvent(address _user) public view override returns (bool) {\n if (_user == address(0)) revert UserIsZero();\n\n (address[] memory assets, AssetStorage[] memory assetsStates) = getAssetsWithState();\n\n (uint256 userLTV, uint256 liquidationThreshold) = Solvency.calculateLTVs(\n Solvency.SolvencyParams(\n siloRepository,\n ISilo(address(this)),\n assets,\n assetsStates,\n _user\n ),\n Solvency.TypeofLTV.LiquidationThreshold\n );\n\n return userLTV <= liquidationThreshold;\n }\n\n /// @inheritdoc IBaseSilo\n function depositPossible(address _asset, address _depositor) public view override returns (bool) {\n return _assetStorage[_asset].debtToken.balanceOf(_depositor) == 0\n && _interestData[_asset].status == AssetStatus.Active;\n }\n\n /// @inheritdoc IBaseSilo\n function borrowPossible(address _asset, address _borrower) public view override returns (bool) {\n AssetStorage storage _assetState = _assetStorage[_asset];\n\n return _assetState.collateralToken.balanceOf(_borrower) == 0\n && _assetState.collateralOnlyToken.balanceOf(_borrower) == 0\n && _interestData[_asset].status == AssetStatus.Active;\n }\n\n /// @inheritdoc IBaseSilo\n function liquidity(address _asset) public view returns (uint256) {\n return ERC20(_asset).balanceOf(address(this)) - _assetStorage[_asset].collateralOnlyDeposits;\n }\n\n /// @dev Initiate asset by deploying accounting EC20 tokens for collateral and debt\n /// @param _tokensFactory factory contract that deploys collateral and debt tokens\n /// @param _asset which asset to initialize\n /// @param _isBridgeAsset true if initialized asset is a bridge asset\n function _initAsset(ITokensFactory _tokensFactory, address _asset, bool _isBridgeAsset) internal {\n AssetSharesMetadata memory metadata = _generateSharesNames(_asset, _isBridgeAsset);\n\n AssetStorage storage _assetState = _assetStorage[_asset];\n\n _assetState.collateralToken = _tokensFactory.createShareCollateralToken(\n metadata.collateralName, metadata.collateralSymbol, _asset\n );\n\n _assetState.collateralOnlyToken = _tokensFactory.createShareCollateralToken(\n metadata.protectedName, metadata.protectedSymbol, _asset\n );\n\n _assetState.debtToken = _tokensFactory.createShareDebtToken(\n metadata.debtName, metadata.debtSymbol, _asset\n );\n\n // keep synced asset in storage array\n _allSiloAssets.push(_asset);\n _interestData[_asset].status = AssetStatus.Active;\n emit AssetStatusUpdate(_asset, AssetStatus.Active);\n }\n\n /// @dev Initializes all assets (bridge assets + unique asset) for Silo but only if asset has not been\n /// initialized already. It's safe to call it multiple times. It's safe for anyone to call it at any time.\n function _initAssetsTokens() internal {\n ITokensFactory tokensFactory = siloRepository.tokensFactory();\n\n // init silo asset if needed\n if (address(_assetStorage[siloAsset].collateralToken) == address(0)) {\n _initAsset(tokensFactory, siloAsset, false);\n }\n\n // sync active assets\n address[] memory bridgeAssets = siloRepository.getBridgeAssets();\n\n for (uint256 i = 0; i < bridgeAssets.length; i++) {\n address bridgeAsset = bridgeAssets[i];\n // In case a bridge asset is added that already has a Silo,\n // do not initiate that asset in its Silo\n if (address(_assetStorage[bridgeAsset].collateralToken) == address(0)) {\n _initAsset(tokensFactory, bridgeAsset, true);\n } else {\n _interestData[bridgeAsset].status = AssetStatus.Active;\n emit AssetStatusUpdate(bridgeAsset, AssetStatus.Active);\n }\n }\n }\n\n /// @dev Generate asset shares tokens names and symbols\n /// @param _asset asset for which shares tokens will be initializaed\n /// @param _isBridgeAsset true if initialized asset is a bridge asset\n function _generateSharesNames(address _asset, bool _isBridgeAsset)\n internal\n view\n returns (AssetSharesMetadata memory metadata)\n {\n // Naming convention in UNI example:\n // - for siloAsset: sUNI, dUNI, spUNI\n // - for bridgeAsset: sWETH-UNI, dWETH-UNI, spWETH-UNI\n string memory assetSymbol = TokenHelper.symbol(_asset);\n\n metadata = AssetSharesMetadata({\n collateralName: string.concat(\"Silo Finance Borrowable \", assetSymbol, \" Deposit\"),\n collateralSymbol: string.concat(\"s\", assetSymbol),\n protectedName: string.concat(\"Silo Finance Protected \", assetSymbol, \" Deposit\"),\n protectedSymbol: string.concat(\"sp\", assetSymbol),\n debtName: string.concat(\"Silo Finance \", assetSymbol, \" Debt\"),\n debtSymbol: string.concat(\"d\", assetSymbol)\n });\n\n if (_isBridgeAsset) {\n string memory baseSymbol = TokenHelper.symbol(siloAsset);\n\n metadata.collateralName = string.concat(metadata.collateralName, \" in \", baseSymbol, \" Silo\");\n metadata.collateralSymbol = string.concat(metadata.collateralSymbol, \"-\", baseSymbol);\n\n metadata.protectedName = string.concat(metadata.protectedName, \" in \", baseSymbol, \" Silo\");\n metadata.protectedSymbol = string.concat(metadata.protectedSymbol, \"-\", baseSymbol);\n\n metadata.debtName = string.concat(metadata.debtName, \" in \", baseSymbol, \" Silo\");\n metadata.debtSymbol = string.concat(metadata.debtSymbol, \"-\", baseSymbol);\n }\n }\n\n /// @dev Main deposit function that handles all deposit logic and validation\n /// @param _asset asset address that is being deposited\n /// @param _from wallet address form which to pull asset tokens\n /// @param _depositor wallet address that will be granted ownership of deposited tokens. Keep in mind\n /// that deposit can be made by Router contract but the owner of the deposit should be user.\n /// @param _amount deposit amount\n /// @param _collateralOnly true if deposit should be used for collateral only. Otherwise false.\n /// Collateral only deposit cannot be borrowed by anyone and does not earn any interest. However,\n /// it can be used as collateral and can be subject to liquidation.\n /// @return collateralAmount deposited amount\n /// @return collateralShare `_depositor` collateral shares based on deposited amount\n function _deposit(\n address _asset,\n address _from,\n address _depositor,\n uint256 _amount,\n bool _collateralOnly\n )\n internal\n nonReentrant\n validateMaxDepositsAfter(_asset)\n returns (uint256 collateralAmount, uint256 collateralShare)\n {\n // MUST BE CALLED AS FIRST METHOD!\n _accrueInterest(_asset);\n\n if (!depositPossible(_asset, _depositor)) revert DepositNotPossible();\n\n AssetStorage storage _state = _assetStorage[_asset];\n\n collateralAmount = _amount;\n\n uint256 totalDepositsCached = _collateralOnly ? _state.collateralOnlyDeposits : _state.totalDeposits;\n\n if (_collateralOnly) {\n collateralShare = _amount.toShare(totalDepositsCached, _state.collateralOnlyToken.totalSupply());\n _state.collateralOnlyDeposits = totalDepositsCached + _amount;\n _state.collateralOnlyToken.mint(_depositor, collateralShare);\n } else {\n collateralShare = _amount.toShare(totalDepositsCached, _state.collateralToken.totalSupply());\n _state.totalDeposits = totalDepositsCached + _amount;\n _state.collateralToken.mint(_depositor, collateralShare);\n }\n\n ERC20(_asset).safeTransferFrom(_from, address(this), _amount);\n\n emit Deposit(_asset, _depositor, _amount, _collateralOnly);\n }\n\n /// @dev Main withdraw function that handles all withdraw logic and validation\n /// @param _asset asset address that is being withdrawn\n /// @param _depositor wallet address that is an owner of the deposited tokens\n /// @param _receiver wallet address that will receive withdrawn tokens. It's possible that Router\n /// contract is the owner of deposited tokens but we want user to get these tokens directly.\n /// @param _amount amount to withdraw. If amount is equal to maximum value stored by uint256 type\n /// (type(uint256).max), it will be assumed that user wants to withdraw all tokens and final account\n /// will be dynamically calculated including interest.\n /// @param _collateralOnly true if collateral only tokens are to be withdrawn. Otherwise false.\n /// User can deposit the same asset as collateral only and as regular deposit. During withdraw,\n /// it must be specified which tokens are to be withdrawn.\n /// @return withdrawnAmount withdrawn amount that was transferred to user\n /// @return withdrawnShare burned share based on `withdrawnAmount`\n function _withdraw(address _asset, address _depositor, address _receiver, uint256 _amount, bool _collateralOnly)\n internal\n nonReentrant // because we transferring tokens\n onlyExistingAsset(_asset)\n returns (uint256 withdrawnAmount, uint256 withdrawnShare)\n {\n // MUST BE CALLED AS FIRST METHOD!\n _accrueInterest(_asset);\n\n (withdrawnAmount, withdrawnShare) = _withdrawAsset(\n _asset,\n _amount,\n _depositor,\n _receiver,\n _collateralOnly,\n 0 // do not apply any fees on regular withdraw\n );\n\n if (withdrawnAmount == 0) revert UnexpectedEmptyReturn();\n\n if (!isSolvent(_depositor)) revert NotSolvent();\n\n emit Withdraw(_asset, _depositor, _receiver, withdrawnAmount, _collateralOnly);\n }\n\n /// @dev Main borrow function that handles all borrow logic and validation\n /// @param _asset asset address that is being borrowed\n /// @param _borrower wallet address that will own debt\n /// @param _receiver wallet address that will receive borrowed tokens. It's possible that Router\n /// contract is executing borrowing for user and should be the one receiving tokens, however,\n /// the owner of the debt should be user himself.\n /// @param _amount amount of asset to borrow\n /// @return debtAmount borrowed amount\n /// @return debtShare user debt share based on borrowed amount\n function _borrow(address _asset, address _borrower, address _receiver, uint256 _amount)\n internal\n nonReentrant\n returns (uint256 debtAmount, uint256 debtShare)\n {\n // MUST BE CALLED AS FIRST METHOD!\n _accrueInterest(_asset);\n\n if (!borrowPossible(_asset, _borrower)) revert BorrowNotPossible();\n\n if (liquidity(_asset) < _amount) revert NotEnoughLiquidity();\n\n AssetStorage storage _state = _assetStorage[_asset];\n\n uint256 totalBorrowAmount = _state.totalBorrowAmount;\n uint256 entryFee = siloRepository.entryFee();\n uint256 fee = entryFee == 0 ? 0 : _amount * entryFee / Solvency._PRECISION_DECIMALS;\n debtShare = (_amount + fee).toShareRoundUp(totalBorrowAmount, _state.debtToken.totalSupply());\n debtAmount = _amount;\n\n _state.totalBorrowAmount = totalBorrowAmount + _amount + fee;\n _interestData[_asset].protocolFees += fee;\n\n _state.debtToken.mint(_borrower, debtShare);\n\n emit Borrow(_asset, _borrower, _amount);\n ERC20(_asset).safeTransfer(_receiver, _amount);\n\n // IMPORTANT - keep `validateBorrowAfter` at the end\n _validateBorrowAfter(_borrower);\n }\n\n /// @dev Main repay function that handles all repay logic and validation\n /// @param _asset asset address that is being repaid\n /// @param _borrower wallet address for which debt is being repaid\n /// @param _repayer wallet address that will pay the debt. It's possible that Router\n /// contract is executing repay for user and should be the one paying the debt.\n /// @param _amount amount of asset to repay\n /// @return repaidAmount amount repaid\n /// @return repaidShare burned debt share\n function _repay(address _asset, address _borrower, address _repayer, uint256 _amount)\n internal\n onlyExistingAsset(_asset)\n nonReentrant\n returns (uint256 repaidAmount, uint256 repaidShare)\n {\n // MUST BE CALLED AS FIRST METHOD!\n _accrueInterest(_asset);\n\n AssetStorage storage _state = _assetStorage[_asset];\n (repaidAmount, repaidShare) = _calculateDebtAmountAndShare(_state, _borrower, _amount);\n\n if (repaidShare == 0) revert UnexpectedEmptyReturn();\n\n emit Repay(_asset, _borrower, repaidAmount);\n\n ERC20(_asset).safeTransferFrom(_repayer, address(this), repaidAmount);\n\n // change debt state before, because share token state is changes the same way (notification is after burn)\n _state.totalBorrowAmount -= repaidAmount;\n _state.debtToken.burn(_borrower, repaidShare);\n }\n\n /// @param _assets all current assets, this is an optimization, so we don't have to read it from storage few times\n /// @param _user user to liquidate\n /// @param _flashReceiver address which will get all collaterals and will be notified once collaterals will be send\n /// @param _flashReceiverData custom data to forward to receiver\n /// @return receivedCollaterals amounts of collaterals transferred to `_flashReceiver`\n /// @return shareAmountsToRepay expected amounts to repay\n function _userLiquidation(\n address[] memory _assets,\n address _user,\n IFlashLiquidationReceiver _flashReceiver,\n bytes memory _flashReceiverData\n )\n internal\n // we can not use `nonReentrant` because we are using it in `_repay`,\n // and `_repay` needs to be reentered as part of a liquidation\n liquidationNonReentrant\n returns (uint256[] memory receivedCollaterals, uint256[] memory shareAmountsToRepay)\n {\n // gracefully fail if _user is solvent\n if (isSolvent(_user)) {\n uint256[] memory empty = new uint256[](_assets.length);\n return (empty, empty);\n }\n\n (receivedCollaterals, shareAmountsToRepay) = _flashUserLiquidation(_assets, _user, address(_flashReceiver));\n\n // _flashReceiver needs to repayFor user\n _flashReceiver.siloLiquidationCallback(\n _user,\n _assets,\n receivedCollaterals,\n shareAmountsToRepay,\n _flashReceiverData\n );\n\n for (uint256 i = 0; i < _assets.length; i++) {\n if (receivedCollaterals[i] != 0 \|\| shareAmountsToRepay[i] != 0) {\n emit Liquidate(_assets[i], _user, shareAmountsToRepay[i], receivedCollaterals[i]);\n }\n }\n\n if (!isSolvent(_user)) revert NotSolvent();\n }\n\n function _flashUserLiquidation(address[] memory _assets, address _borrower, address _liquidator)\n internal\n returns (uint256[] memory receivedCollaterals, uint256[] memory amountsToRepay)\n {\n uint256 assetsLength = _assets.length;\n receivedCollaterals = new uint256[](assetsLength);\n amountsToRepay = new uint256[](assetsLength);\n\n uint256 protocolLiquidationFee = siloRepository.protocolLiquidationFee();\n\n for (uint256 i = 0; i < assetsLength; i++) {\n _accrueInterest(_assets[i]);\n\n AssetStorage storage _state = _assetStorage[_assets[i]];\n\n // we do not allow for partial repayment on liquidation, that's why max\n (amountsToRepay[i],) = _calculateDebtAmountAndShare(_state, _borrower, type(uint256).max);\n\n (uint256 withdrawnOnlyAmount,) = _withdrawAsset(\n _assets[i],\n type(uint256).max,\n _borrower,\n _liquidator,\n true, // collateral only\n protocolLiquidationFee\n );\n\n (uint256 withdrawnAmount,) = _withdrawAsset(\n _assets[i],\n type(uint256).max,\n _borrower,\n _liquidator,\n false, // collateral only\n protocolLiquidationFee\n );\n\n receivedCollaterals[i] = withdrawnOnlyAmount + withdrawnAmount;\n }\n }\n\n /// @dev Utility function for withdrawing an asset\n /// @param _asset asset to withdraw\n /// @param _assetAmount amount of asset to withdraw\n /// @param _depositor wallet address that is an owner of the deposit\n /// @param _receiver wallet address that is receiving the token\n /// @param _collateralOnly true if withdraw collateral only.\n /// @param _protocolLiquidationFee if provided (!=0) liquidation fees will be applied and returned\n /// `withdrawnAmount` will be decreased\n /// @return withdrawnAmount amount of asset that has been sent to receiver\n /// @return burnedShare burned share based on `withdrawnAmount`\n function _withdrawAsset(\n address _asset,\n uint256 _assetAmount,\n address _depositor,\n address _receiver,\n bool _collateralOnly,\n uint256 _protocolLiquidationFee\n )\n internal\n returns (uint256 withdrawnAmount, uint256 burnedShare)\n {\n (uint256 assetTotalDeposits, IShareToken shareToken, uint256 availableLiquidity) =\n _getWithdrawAssetData(_asset, _collateralOnly);\n\n if (_assetAmount == type(uint256).max) {\n burnedShare = shareToken.balanceOf(_depositor);\n withdrawnAmount = burnedShare.toAmount(assetTotalDeposits, shareToken.totalSupply());\n } else {\n burnedShare = _assetAmount.toShareRoundUp(assetTotalDeposits, shareToken.totalSupply());\n withdrawnAmount = _assetAmount;\n }\n\n if (withdrawnAmount == 0) {\n // we can not revert here, because liquidation will fail when one of collaterals will be empty\n return (0, 0);\n }\n\n if (assetTotalDeposits < withdrawnAmount) revert NotEnoughDeposits();\n\n unchecked {\n // can be unchecked because of the `if` above\n assetTotalDeposits -= withdrawnAmount;\n }\n\n uint256 amountToTransfer = _applyLiquidationFee(_asset, withdrawnAmount, _protocolLiquidationFee);\n\n if (availableLiquidity < amountToTransfer) revert NotEnoughLiquidity();\n\n AssetStorage storage _state = _assetStorage[_asset];\n\n if (_collateralOnly) {\n _state.collateralOnlyDeposits = assetTotalDeposits;\n } else {\n _state.totalDeposits = assetTotalDeposits;\n }\n\n shareToken.burn(_depositor, burnedShare);\n // in case token sent in fee-on-transfer type of token we do not care when withdrawing\n ERC20(_asset).safeTransfer(_receiver, amountToTransfer);\n }\n\n /// @notice Calculates liquidations fee and returns amount of asset transferred to liquidator\n /// @param _asset asset address\n /// @param _amount amount on which we will apply fee\n /// @param _protocolLiquidationFee liquidation fee in Solvency._PRECISION_DECIMALS\n /// @return change amount left after subtracting liquidation fee\n function _applyLiquidationFee(address _asset, uint256 _amount, uint256 _protocolLiquidationFee)\n internal\n returns (uint256 change)\n {\n if (_protocolLiquidationFee == 0) {\n return _amount;\n }\n\n uint256 liquidationFeeAmount;\n\n (\n liquidationFeeAmount,\n _interestData[_asset].protocolFees\n ) = Solvency.calculateLiquidationFee(_interestData[_asset].protocolFees, _amount, _protocolLiquidationFee);\n\n unchecked {\n // if fees will not be higher than 100% this will not underflow, this is responsibility of siloRepository\n // in case we do underflow, we can expect liquidator reject tx because of too little change\n change = _amount - liquidationFeeAmount;\n }\n }\n\n /// @dev harvest protocol fees from particular asset\n /// @param _asset asset we want to harvest fees from\n /// @param _receiver address of fees receiver\n /// @return harvestedFees harvested fee\n function _harvestProtocolFees(address _asset, address _receiver)\n internal\n nonReentrant\n returns (uint256 harvestedFees)\n {\n AssetInterestData storage data = _interestData[_asset];\n\n harvestedFees = data.protocolFees - data.harvestedProtocolFees;\n\n uint256 currentLiquidity = liquidity(_asset);\n\n if (harvestedFees > currentLiquidity) {\n harvestedFees = currentLiquidity;\n }\n\n if (harvestedFees == 0) {\n return 0;\n }\n\n unchecked {\n // This can't overflow because this addition is less than or equal to data.protocolFees\n data.harvestedProtocolFees += harvestedFees;\n }\n\n ERC20(_asset).safeTransfer(_receiver, harvestedFees);\n }\n\n /// @notice Accrue interest for asset\n /// @dev Silo Interest Rate Model implements dynamic interest rate that changes every second. Returned\n /// interest rate by the model is compounded rate so it can be used in math calculations as if it was\n /// static. Rate is calculated for the time range between last update and current timestamp.\n /// @param _asset address of the asset for which interest should be accrued\n /// @return accruedInterest total accrued interest\n function _accrueInterest(address _asset) internal returns (uint256 accruedInterest) {\n /// @dev `_accrueInterest` is called on every user action, including liquidation. It's enough to check\n /// if Silo is paused in this function.\n if (IGuardedLaunch(address(siloRepository)).isSiloPaused(address(this), _asset)) {\n revert Paused();\n }\n\n AssetStorage storage _state = _assetStorage[_asset];\n AssetInterestData storage _assetInterestData = _interestData[_asset];\n uint256 lastTimestamp = _assetInterestData.interestRateTimestamp;\n\n // This is the first time, so we can return early and save some gas\n if (lastTimestamp == 0) {\n _assetInterestData.interestRateTimestamp = uint64(block.timestamp);\n return 0;\n }\n\n // Interest has already been accrued this block\n if (lastTimestamp == block.timestamp) {\n return 0;\n }\n\n uint256 rcomp = _getModel(_asset).getCompoundInterestRateAndUpdate(_asset, block.timestamp);\n uint256 protocolShareFee = siloRepository.protocolShareFee();\n\n uint256 totalBorrowAmountCached = _state.totalBorrowAmount;\n uint256 protocolFeesCached = _assetInterestData.protocolFees;\n uint256 newProtocolFees;\n uint256 protocolShare;\n uint256 depositorsShare;\n\n accruedInterest = totalBorrowAmountCached * rcomp / Solvency._PRECISION_DECIMALS;\n\n unchecked {\n // If we overflow on multiplication it should not revert tx, we will get lower fees\n protocolShare = accruedInterest * protocolShareFee / Solvency._PRECISION_DECIMALS;\n newProtocolFees = protocolFeesCached + protocolShare;\n\n if (newProtocolFees < protocolFeesCached) {\n protocolShare = type(uint256).max - protocolFeesCached;\n newProtocolFees = type(uint256).max;\n }\n \n depositorsShare = accruedInterest - protocolShare;\n }\n\n // update contract state\n _state.totalBorrowAmount = totalBorrowAmountCached + accruedInterest;\n _state.totalDeposits = _state.totalDeposits + depositorsShare;\n _assetInterestData.protocolFees = newProtocolFees;\n _assetInterestData.interestRateTimestamp = uint64(block.timestamp);\n }\n\n /// @dev gets interest rates model object\n /// @param _asset asset for which to calculate interest rate\n /// @return IInterestRateModel interest rates model object\n function _getModel(address _asset) internal view returns (IInterestRateModel) {\n return IInterestRateModel(siloRepository.getInterestRateModel(address(this), _asset));\n }\n\n /// @dev calculates amount to repay based on user shares, we do not apply virtual balances here,\n /// if needed, they need to be apply beforehand\n /// @param _state asset storage struct\n /// @param _borrower borrower address\n /// @param _amount proposed amount of asset to repay. Based on that,`repayShare` is calculated.\n /// @return amount amount of asset to repay\n /// @return repayShare amount of debt token representing debt ownership\n function _calculateDebtAmountAndShare(AssetStorage storage _state, address _borrower, uint256 _amount)\n internal\n view\n returns (uint256 amount, uint256 repayShare)\n {\n uint256 borrowerDebtShare = _state.debtToken.balanceOf(_borrower);\n uint256 debtTokenTotalSupply = _state.debtToken.totalSupply();\n uint256 totalBorrowed = _state.totalBorrowAmount;\n uint256 maxAmount = borrowerDebtShare.toAmountRoundUp(totalBorrowed, debtTokenTotalSupply);\n\n if (_amount >= maxAmount) {\n amount = maxAmount;\n repayShare = borrowerDebtShare;\n } else {\n amount = _amount;\n repayShare = _amount.toShare(totalBorrowed, debtTokenTotalSupply);\n }\n }\n\n /// @dev verifies if user did not borrow more than allowed maximum\n function _validateBorrowAfter(address _user) private view {\n (address[] memory assets, AssetStorage[] memory assetsStates) = getAssetsWithState();\n\n (uint256 userLTV, uint256 maximumAllowedLTV) = Solvency.calculateLTVs(\n Solvency.SolvencyParams(\n siloRepository,\n ISilo(address(this)),\n assets,\n assetsStates,\n _user\n ),\n Solvency.TypeofLTV.MaximumLTV\n );\n\n if (userLTV > maximumAllowedLTV) revert MaximumLTVReached();\n }\n\n function _getWithdrawAssetData(address _asset, bool _collateralOnly)\n private\n view\n returns(uint256 assetTotalDeposits, IShareToken shareToken, uint256 availableLiquidity)\n {\n AssetStorage storage _state = _assetStorage[_asset];\n\n if (_collateralOnly) {\n assetTotalDeposits = _state.collateralOnlyDeposits;\n shareToken = _state.collateralOnlyToken;\n availableLiquidity = assetTotalDeposits;\n } else {\n assetTotalDeposits = _state.totalDeposits;\n shareToken = _state.collateralToken;\n availableLiquidity = liquidity(_asset);\n }\n }\n}\n"
	},
	"@openzeppelin/contracts/token/ERC20/IERC20.sol": {
	"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)\n\npragma solidity ^0.8.0;\n\n/*\n @dev Interface of the ERC20 standard as defined in the EIP.\n /\ninterface IERC20 {\n /\n @dev Returns the amount of tokens in existence.\n /\n function totalSupply() external view returns (uint256);\n\n /\n @dev Returns the amount of tokens owned by `account`.\n /\n function balanceOf(address account) external view returns (uint256);\n\n /\n @dev Moves `amount` tokens from the caller's account to `recipient`.\n \n Returns a boolean value indicating whether the operation succeeded.\n \n Emits a {Transfer} event.\n /\n function transfer(address recipient, uint256 amount) external returns (bool);\n\n /\n @dev Returns the remaining number of tokens that `spender` will be\n * allowed to spend on behalf of `owner` through {transferFrom}. This is\n * zero by default.\n \n This value changes when {approve} or {transferFrom} are called.\n /\n function allowance(address owner, address spender) external view returns (uint256);\n\n /\n @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\n \n Returns a boolean value indicating whether the operation succeeded.\n \n IMPORTANT: Beware that changing an allowance with this method brings the risk\n * that someone may use both the old and the new allowance by unfortunate\n * transaction ordering. One possible solution to mitigate this race\n * condition is to first reduce the spender's allowance to 0 and set the\n * desired value afterwards:\n * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n \n Emits an {Approval} event.\n /\n function approve(address spender, uint256 amount) external returns (bool);\n\n /\n @dev Moves `amount` tokens from `sender` to `recipient` using the\n * allowance mechanism. `amount` is then deducted from the caller's\n * allowance.\n \n Returns a boolean value indicating whether the operation succeeded.\n \n Emits a {Transfer} event.\n /\n function transferFrom(\n address sender,\n address recipient,\n uint256 amount\n ) external returns (bool);\n\n /\n @dev Emitted when `value` tokens are moved from one account (`from`) to\n * another (`to`).\n \n Note that `value` may be zero.\n /\n event Transfer(address indexed from, address indexed to, uint256 value);\n\n /\n @dev Emitted when the allowance of a `spender` for an `owner` is set by\n * a call to {approve}. `value` is the new allowance.\n */\n event Approval(address indexed owner, address indexed spender, uint256 value);\n}\n"
	},
	"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol": {
	"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)\n\npragma solidity ^0.8.0;\n\nimport \"../IERC20.sol\";\n\n/*\n @dev Interface for the optional metadata functions from the ERC20 standard.\n \n _Available since v4.1._\n /\ninterface IERC20Metadata is IERC20 {\n /\n @dev Returns the name of the token.\n /\n function name() external view returns (string memory);\n\n /\n @dev Returns the symbol of the token.\n /\n function symbol() external view returns (string memory);\n\n /\n @dev Returns the decimals places of the token.\n */\n function decimals() external view returns (uint8);\n}\n"
	},
	"@openzeppelin/contracts/utils/Context.sol": {
	"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)\n\npragma solidity ^0.8.0;\n\n/*\n @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n \n This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n function _msgSender() internal view virtual returns (address) {\n return msg.sender;\n }\n\n function _msgData() internal view virtual returns (bytes calldata) {\n return msg.data;\n }\n}\n"
	},
	"@openzeppelin/contracts/utils/Address.sol": {
	"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)\n\npragma solidity ^0.8.0;\n\n/*\n @dev Collection of functions related to the address type\n /\nlibrary Address {\n /\n @dev Returns true if `account` is a contract.\n \n [IMPORTANT]\n * ====\n * It is unsafe to assume that an address for which this function returns\n * false is an externally-owned account (EOA) and not a contract.\n \n Among others, `isContract` will return false for the following\n * types of addresses:\n \n - an externally-owned account\n * - a contract in construction\n * - an address where a contract will be created\n * - an address where a contract lived, but was destroyed\n * ====\n /\n function isContract(address account) internal view returns (bool) {\n // This method relies on extcodesize, which returns 0 for contracts in\n // construction, since the code is only stored at the end of the\n // constructor execution.\n\n uint256 size;\n assembly {\n size := extcodesize(account)\n }\n return size > 0;\n }\n\n /\n @dev Replacement for Solidity's `transfer`: sends `amount` wei to\n * `recipient`, forwarding all available gas and reverting on errors.\n \n https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\n * of certain opcodes, possibly making contracts go over the 2300 gas limit\n * imposed by `transfer`, making them unable to receive funds via\n * `transfer`. {sendValue} removes this limitation.\n \n https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].\n \n IMPORTANT: because control is transferred to `recipient`, care must be\n * taken to not create reentrancy vulnerabilities. Consider using\n * {ReentrancyGuard} or the\n * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\n /\n function sendValue(address payable recipient, uint256 amount) internal {\n require(address(this).balance >= amount, \"Address: insufficient balance\");\n\n (bool success, ) = recipient.call{value: amount}(\"\");\n require(success, \"Address: unable to send value, recipient may have reverted\");\n }\n\n /\n @dev Performs a Solidity function call using a low level `call`. A\n * plain `call` is an unsafe replacement for a function call: use this\n * function instead.\n \n If `target` reverts with a revert reason, it is bubbled up by this\n * function (like regular Solidity function calls).\n \n Returns the raw returned data. To convert to the expected return value,\n * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\n \n Requirements:\n \n - `target` must be a contract.\n * - calling `target` with `data` must not revert.\n \n _Available since v3.1._\n /\n function functionCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionCall(target, data, \"Address: low-level call failed\");\n }\n\n /\n @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\n * `errorMessage` as a fallback revert reason when `target` reverts.\n \n _Available since v3.1._\n /\n function functionCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, 0, errorMessage);\n }\n\n /\n @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but also transferring `value` wei to `target`.\n \n Requirements:\n \n - the calling contract must have an ETH balance of at least `value`.\n * - the called Solidity function must be `payable`.\n \n _Available since v3.1._\n /\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value\n ) internal returns (bytes memory) {\n return functionCallWithValue(target, data, value, \"Address: low-level call with value failed\");\n }\n\n /\n @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\n * with `errorMessage` as a fallback revert reason when `target` reverts.\n \n _Available since v3.1._\n /\n function functionCallWithValue(\n address target,\n bytes memory data,\n uint256 value,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(address(this).balance >= value, \"Address: insufficient balance for call\");\n require(isContract(target), \"Address: call to non-contract\");\n\n (bool success, bytes memory returndata) = target.call{value: value}(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /\n @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a static call.\n \n _Available since v3.3._\n /\n function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\n return functionStaticCall(target, data, \"Address: low-level static call failed\");\n }\n\n /\n @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a static call.\n \n _Available since v3.3._\n /\n function functionStaticCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal view returns (bytes memory) {\n require(isContract(target), \"Address: static call to non-contract\");\n\n (bool success, bytes memory returndata) = target.staticcall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /\n @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\n * but performing a delegate call.\n \n _Available since v3.4._\n /\n function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\n return functionDelegateCall(target, data, \"Address: low-level delegate call failed\");\n }\n\n /\n @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\n * but performing a delegate call.\n \n _Available since v3.4._\n /\n function functionDelegateCall(\n address target,\n bytes memory data,\n string memory errorMessage\n ) internal returns (bytes memory) {\n require(isContract(target), \"Address: delegate call to non-contract\");\n\n (bool success, bytes memory returndata) = target.delegatecall(data);\n return verifyCallResult(success, returndata, errorMessage);\n }\n\n /\n @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the\n * revert reason using the provided one.\n \n _Available since v4.3._\n */\n function verifyCallResult(\n bool success,\n bytes memory returndata,\n string memory errorMessage\n ) internal pure returns (bytes memory) {\n if (success) {\n return returndata;\n } else {\n // Look for revert reason and bubble it up if present\n if (returndata.length > 0) {\n // The easiest way to bubble the revert reason is using memory via assembly\n\n assembly {\n let returndata_size := mload(returndata)\n revert(add(32, returndata), returndata_size)\n }\n } else {\n revert(errorMessage);\n }\n }\n }\n}\n"
	},
	"contracts/interfaces/IBaseSilo.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\nimport \"./IShareToken.sol\";\nimport \"./IFlashLiquidationReceiver.sol\";\nimport \"./ISiloRepository.sol\";\n\ninterface IBaseSilo {\n enum AssetStatus { Undefined, Active, Removed }\n\n /// @dev Storage struct that holds all required data for a single token market\n struct AssetStorage {\n /// @dev Token that represents a share in totalDeposits of Silo\n IShareToken collateralToken;\n /// @dev Token that represents a share in collateralOnlyDeposits of Silo\n IShareToken collateralOnlyToken;\n /// @dev Token that represents a share in totalBorrowAmount of Silo\n IShareToken debtToken;\n /// @dev COLLATERAL: Amount of asset token that has been deposited to Silo with interest earned by depositors.\n /// It also includes token amount that has been borrowed.\n uint256 totalDeposits;\n /// @dev COLLATERAL ONLY: Amount of asset token that has been deposited to Silo that can be ONLY used\n /// as collateral. These deposits do NOT earn interest and CANNOT be borrowed.\n uint256 collateralOnlyDeposits;\n /// @dev DEBT: Amount of asset token that has been borrowed with accrued interest.\n uint256 totalBorrowAmount;\n }\n\n /// @dev Storage struct that holds data related to fees and interest\n struct AssetInterestData {\n /// @dev Total amount of already harvested protocol fees\n uint256 harvestedProtocolFees;\n /// @dev Total amount (ever growing) of asset token that has been earned by the protocol from\n /// generated interest.\n uint256 protocolFees;\n /// @dev Timestamp of the last time `interestRate` has been updated in storage.\n uint64 interestRateTimestamp;\n /// @dev True if asset was removed from the protocol. If so, deposit and borrow functions are disabled\n /// for that asset\n AssetStatus status;\n }\n\n /// @notice data that InterestModel needs for calculations\n struct UtilizationData {\n uint256 totalDeposits;\n uint256 totalBorrowAmount;\n /// @dev timestamp of last interest accrual\n uint64 interestRateTimestamp;\n }\n\n /// @dev Shares names and symbols that are generated while asset initialization\n struct AssetSharesMetadata {\n /// @dev Name for the collateral shares token\n string collateralName;\n /// @dev Symbol for the collateral shares token\n string collateralSymbol;\n /// @dev Name for the collateral only (protected collateral) shares token\n string protectedName;\n /// @dev Symbol for the collateral only (protected collateral) shares token\n string protectedSymbol;\n /// @dev Name for the debt shares token\n string debtName;\n /// @dev Symbol for the debt shares token\n string debtSymbol;\n }\n\n /// @notice Emitted when deposit is made\n /// @param asset asset address that was deposited\n /// @param depositor wallet address that deposited asset\n /// @param amount amount of asset that was deposited\n /// @param collateralOnly type of deposit, true if collateralOnly deposit was used\n event Deposit(address indexed asset, address indexed depositor, uint256 amount, bool collateralOnly);\n\n /// @notice Emitted when withdraw is made\n /// @param asset asset address that was withdrawn\n /// @param depositor wallet address that deposited asset\n /// @param receiver wallet address that received asset\n /// @param amount amount of asset that was withdrew\n /// @param collateralOnly type of withdraw, true if collateralOnly deposit was used\n event Withdraw(\n address indexed asset,\n address indexed depositor,\n address indexed receiver,\n uint256 amount,\n bool collateralOnly\n );\n\n /// @notice Emitted on asset borrow\n /// @param asset asset address that was borrowed\n /// @param user wallet address that borrowed asset\n /// @param amount amount of asset that was borrowed\n event Borrow(address indexed asset, address indexed user, uint256 amount);\n\n /// @notice Emitted on asset repay\n /// @param asset asset address that was repaid\n /// @param user wallet address that repaid asset\n /// @param amount amount of asset that was repaid\n event Repay(address indexed asset, address indexed user, uint256 amount);\n\n /// @notice Emitted on user liquidation\n /// @param asset asset address that was liquidated\n /// @param user wallet address that was liquidated\n /// @param shareAmountRepaid amount of collateral-share token that was repaid. This is collateral token representing\n /// ownership of underlying deposit.\n /// @param seizedCollateral amount of underlying token that was seized by liquidator\n event Liquidate(address indexed asset, address indexed user, uint256 shareAmountRepaid, uint256 seizedCollateral);\n\n /// @notice Emitted when the status for an asset is updated\n /// @param asset asset address that was updated\n /// @param status new asset status\n event AssetStatusUpdate(address indexed asset, AssetStatus indexed status);\n\n /// @return version of the silo contract\n function VERSION() external returns (uint128); // solhint-disable-line func-name-mixedcase\n\n /// @notice Synchronize current bridge assets with Silo\n /// @dev This function needs to be called on Silo deployment to setup all assets for Silo. It needs to be\n /// called every time a bridged asset is added or removed. When bridge asset is removed, depositing and borrowing\n /// should be disabled during asset sync.\n function syncBridgeAssets() external;\n\n /// @notice Get Silo Repository contract address\n /// @return Silo Repository contract address\n function siloRepository() external view returns (ISiloRepository);\n\n /// @notice Get asset storage data\n /// @param _asset asset address\n /// @return AssetStorage struct\n function assetStorage(address _asset) external view returns (AssetStorage memory);\n\n /// @notice Get asset interest data\n /// @param _asset asset address\n /// @return AssetInterestData struct\n function interestData(address _asset) external view returns (AssetInterestData memory);\n\n /// @dev helper method for InterestRateModel calculations\n function utilizationData(address _asset) external view returns (UtilizationData memory data);\n\n /// @notice Calculates solvency of an account\n /// @param _user wallet address for which solvency is calculated\n /// @return true if solvent, false otherwise\n function isSolvent(address _user) external view returns (bool);\n\n /// @notice Returns all initialized (synced) assets of Silo including current and removed bridge assets\n /// @return assets array of initialized assets of Silo\n function getAssets() external view returns (address[] memory assets);\n\n /// @notice Returns all initialized (synced) assets of Silo including current and removed bridge assets\n /// with corresponding state\n /// @return assets array of initialized assets of Silo\n /// @return assetsStorage array of assets state corresponding to `assets` array\n function getAssetsWithState() external view returns (address[] memory assets, AssetStorage[] memory assetsStorage);\n\n /// @notice Check if depositing an asset for given account is possible\n /// @dev Depositing an asset that has been already borrowed (and vice versa) is disallowed\n /// @param _asset asset we want to deposit\n /// @param _depositor depositor address\n /// @return true if asset can be deposited by depositor\n function depositPossible(address _asset, address _depositor) external view returns (bool);\n\n /// @notice Check if borrowing an asset for given account is possible\n /// @dev Borrowing an asset that has been already deposited (and vice versa) is disallowed\n /// @param _asset asset we want to deposit\n /// @param _borrower borrower address\n /// @return true if asset can be borrowed by borrower\n function borrowPossible(address _asset, address _borrower) external view returns (bool);\n\n /// @dev Amount of token that is available for borrowing\n /// @param _asset asset to get liquidity for\n /// @return Silo liquidity\n function liquidity(address _asset) external view returns (uint256);\n}\n"
	},
	"contracts/interfaces/IShareToken.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\nimport \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol\";\n\nimport \"./INotificationReceiver.sol\";\n\ninterface IShareToken is IERC20Metadata {\n /// @notice Emitted every time receiver is notified about token transfer\n /// @param notificationReceiver receiver address\n /// @param success false if TX reverted on `notificationReceiver` side, otherwise true\n event NotificationSent(\n INotificationReceiver indexed notificationReceiver,\n bool success\n );\n\n /// @notice Mint method for Silo to create debt position\n /// @param _account wallet for which to mint token\n /// @param _amount amount of token to be minted\n function mint(address _account, uint256 _amount) external;\n\n /// @notice Burn method for Silo to close debt position\n /// @param _account wallet for which to burn token\n /// @param _amount amount of token to be burned\n function burn(address _account, uint256 _amount) external;\n}\n"
	},
	"contracts/interfaces/IFlashLiquidationReceiver.sol": {
	"content": "// SPDX-License-Identifier: MIT\npragma solidity 0.8.13;\n\n/// @dev when performing Silo flash liquidation, FlashReceiver contract will receive all collaterals\ninterface IFlashLiquidationReceiver {\n /// @dev this method is called when doing Silo flash liquidation\n /// one can NOT assume, that if _seizedCollateral[i] != 0, then _shareAmountsToRepaid[i] must be 0\n /// one should assume, that any combination of amounts is possible\n /// on callback, one must call `Silo.repayFor` because at the end of transaction,\n /// Silo will check if borrower is solvent.\n /// @param _user user address, that is liquidated\n /// @param _assets array of collateral assets received during user liquidation\n /// this array contains all assets (collateral borrowed) without any order\n /// @param _receivedCollaterals array of collateral amounts received during user liquidation\n /// indexes of amounts are related to `_assets`,\n /// @param _shareAmountsToRepaid array of amounts to repay for each asset\n /// indexes of amounts are related to `_assets`,\n /// @param _flashReceiverData data that are passed from sender that executes liquidation\n function siloLiquidationCallback(\n address _user,\n address[] calldata _assets,\n uint256[] calldata _receivedCollaterals,\n uint256[] calldata _shareAmountsToRepaid,\n bytes memory _flashReceiverData\n ) external;\n}\n"
	},
	"contracts/interfaces/ISiloRepository.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\nimport \"./ISiloFactory.sol\";\nimport \"./ITokensFactory.sol\";\nimport \"./IPriceProvidersRepository.sol\";\nimport \"./INotificationReceiver.sol\";\nimport \"./IInterestRateModel.sol\";\n\ninterface ISiloRepository {\n /// @dev protocol fees in precision points (Solvency._PRECISION_DECIMALS), we do allow for fee == 0\n struct Fees {\n /// @dev One time protocol fee for opening a borrow position in precision points (Solvency._PRECISION_DECIMALS)\n uint64 entryFee;\n /// @dev Protocol revenue share in interest paid in precision points (Solvency._PRECISION_DECIMALS)\n uint64 protocolShareFee;\n /// @dev Protocol share in liquidation profit in precision points (Solvency._PRECISION_DECIMALS).\n /// It's calculated from total collateral amount to be transferred to liquidator.\n uint64 protocolLiquidationFee;\n }\n\n struct SiloVersion {\n /// @dev Default version of Silo. If set to 0, it means it is not set. By default it is set to 1\n uint128 byDefault;\n\n /// @dev Latest added version of Silo. If set to 0, it means it is not set. By default it is set to 1\n uint128 latest;\n }\n\n /// @dev AssetConfig struct represents configurable parameters for each Silo\n struct AssetConfig {\n /// @dev Loan-to-Value ratio represents the maximum borrowing power of a specific collateral.\n /// For example, if the collateral asset has an LTV of 75%, the user can borrow up to 0.75 worth\n /// of quote token in the principal currency for every quote token worth of collateral.\n /// value uses 18 decimals eg. 100% == 1e18\n /// max valid value is 1e18 so it needs storage of 60 bits\n uint64 maxLoanToValue;\n\n /// @dev Liquidation Threshold represents the threshold at which a borrow position will be considered\n /// undercollateralized and subject to liquidation for each collateral. For example,\n /// if a collateral has a liquidation threshold of 80%, it means that the loan will be\n /// liquidated when the borrowAmount value is worth 80% of the collateral value.\n /// value uses 18 decimals eg. 100% == 1e18\n uint64 liquidationThreshold;\n\n /// @dev interest rate model address\n IInterestRateModel interestRateModel;\n }\n\n event NewDefaultMaximumLTV(uint64 defaultMaximumLTV);\n\n event NewDefaultLiquidationThreshold(uint64 defaultLiquidationThreshold);\n\n /// @notice Emitted on new Silo creation\n /// @param silo deployed Silo address\n /// @param asset unique asset for deployed Silo\n /// @param siloVersion version of deployed Silo\n event NewSilo(address indexed silo, address indexed asset, uint128 siloVersion);\n\n /// @notice Emitted when new Silo (or existing one) becomes a bridge pool (pool with only bridge tokens).\n /// @param pool address of the bridge pool, It can be zero address when bridge asset is removed and pool no longer\n /// is treated as bridge pool\n event BridgePool(address indexed pool);\n\n /// @notice Emitted on new bridge asset\n /// @param newBridgeAsset address of added bridge asset\n event BridgeAssetAdded(address indexed newBridgeAsset);\n\n /// @notice Emitted on removed bridge asset\n /// @param bridgeAssetRemoved address of removed bridge asset\n event BridgeAssetRemoved(address indexed bridgeAssetRemoved);\n\n /// @notice Emitted when default interest rate model is changed\n /// @param newModel address of new interest rate model\n event InterestRateModel(IInterestRateModel indexed newModel);\n\n /// @notice Emitted on price provider repository address update\n /// @param newProvider address of new oracle repository\n event PriceProvidersRepositoryUpdate(\n IPriceProvidersRepository indexed newProvider\n );\n\n /// @notice Emitted on token factory address update\n /// @param newTokensFactory address of new token factory\n event TokensFactoryUpdate(address indexed newTokensFactory);\n\n /// @notice Emitted on router address update\n /// @param newRouter address of new router\n event RouterUpdate(address indexed newRouter);\n\n /// @notice Emitted on INotificationReceiver address update\n /// @param newIncentiveContract address of new INotificationReceiver\n event NotificationReceiverUpdate(INotificationReceiver indexed newIncentiveContract);\n\n /// @notice Emitted when new Silo version is registered\n /// @param factory factory address that deploys registered Silo version\n /// @param siloLatestVersion Silo version of registered Silo\n /// @param siloDefaultVersion current default Silo version\n event RegisterSiloVersion(address indexed factory, uint128 siloLatestVersion, uint128 siloDefaultVersion);\n\n /// @notice Emitted when Silo version is unregistered\n /// @param factory factory address that deploys unregistered Silo version\n /// @param siloVersion version that was unregistered\n event UnregisterSiloVersion(address indexed factory, uint128 siloVersion);\n\n /// @notice Emitted when default Silo version is updated\n /// @param newDefaultVersion new default version\n event SiloDefaultVersion(uint128 newDefaultVersion);\n\n /// @notice Emitted when default fee is updated\n /// @param newEntryFee new entry fee\n /// @param newProtocolShareFee new protocol share fee\n /// @param newProtocolLiquidationFee new protocol liquidation fee\n event FeeUpdate(\n uint64 newEntryFee,\n uint64 newProtocolShareFee,\n uint64 newProtocolLiquidationFee\n );\n\n /// @notice Emitted when asset config is updated for a silo\n /// @param silo silo for which asset config is being set\n /// @param asset asset for which asset config is being set\n /// @param assetConfig new asset config\n event AssetConfigUpdate(address indexed silo, address indexed asset, AssetConfig assetConfig);\n\n /// @notice Emitted when silo (silo factory) version is set for asset\n /// @param asset asset for which asset config is being set\n /// @param version Silo version\n event VersionForAsset(address indexed asset, uint128 version);\n\n /// @param _siloAsset silo asset\n /// @return version of Silo that is assigned for provided asset, if not assigned it returns zero (default)\n function getVersionForAsset(address _siloAsset) external returns (uint128);\n\n /// @notice setter for `getVersionForAsset` mapping\n /// @param _siloAsset silo asset\n /// @param _version version of Silo that will be assigned for `_siloAsset`, zero (default) is acceptable\n function setVersionForAsset(address _siloAsset, uint128 _version) external;\n\n /// @notice use this method only when off-chain verification is OFF\n /// @dev Silo does NOT support rebase and deflationary tokens\n /// @param _siloAsset silo asset\n /// @param _siloData (optional) data that may be needed during silo creation\n /// @return createdSilo address of created silo\n function newSilo(address _siloAsset, bytes memory _siloData) external returns (address createdSilo);\n\n /// @notice use this method to deploy new version of Silo for an asset that already has Silo deployed.\n /// Only owner (DAO) can replace.\n /// @dev Silo does NOT support rebase and deflationary tokens\n /// @param _siloAsset silo asset\n /// @param _siloVersion version of silo implementation. Use 0 for default version which is fine\n /// for 99% of cases.\n /// @param _siloData (optional) data that may be needed during silo creation\n /// @return createdSilo address of created silo\n function replaceSilo(\n address _siloAsset,\n uint128 _siloVersion,\n bytes memory _siloData\n ) external returns (address createdSilo);\n\n /// @notice Set factory contract for debt and collateral tokens for each Silo asset\n /// @dev Callable only by owner\n /// @param _tokensFactory address of TokensFactory contract that deploys debt and collateral tokens\n function setTokensFactory(address _tokensFactory) external;\n\n /// @notice Set default fees\n /// @dev Callable only by owner\n /// @param _fees:\n /// - _entryFee one time protocol fee for opening a borrow position in precision points\n /// (Solvency._PRECISION_DECIMALS)\n /// - _protocolShareFee protocol revenue share in interest paid in precision points\n /// (Solvency._PRECISION_DECIMALS)\n /// - _protocolLiquidationFee protocol share in liquidation profit in precision points\n /// (Solvency._PRECISION_DECIMALS). It's calculated from total collateral amount to be transferred\n /// to liquidator.\n function setFees(Fees calldata _fees) external;\n\n /// @notice Set configuration for given asset in given Silo\n /// @dev Callable only by owner\n /// @param _silo Silo address for which config applies\n /// @param _asset asset address for which config applies\n /// @param _assetConfig:\n /// - _maxLoanToValue maximum Loan-to-Value, for details see `Repository.AssetConfig.maxLoanToValue`\n /// - _liquidationThreshold liquidation threshold, for details see `Repository.AssetConfig.maxLoanToValue`\n /// - _interestRateModel interest rate model address, for details see `Repository.AssetConfig.interestRateModel`\n function setAssetConfig(\n address _silo,\n address _asset,\n AssetConfig calldata _assetConfig\n ) external;\n\n /// @notice Set default interest rate model\n /// @dev Callable only by owner\n /// @param _defaultInterestRateModel default interest rate model\n function setDefaultInterestRateModel(IInterestRateModel _defaultInterestRateModel) external;\n\n /// @notice Set default maximum LTV\n /// @dev Callable only by owner\n /// @param _defaultMaxLTV default maximum LTV in precision points (Solvency._PRECISION_DECIMALS)\n function setDefaultMaximumLTV(uint64 _defaultMaxLTV) external;\n\n /// @notice Set default liquidation threshold\n /// @dev Callable only by owner\n /// @param _defaultLiquidationThreshold default liquidation threshold in precision points\n /// (Solvency._PRECISION_DECIMALS)\n function setDefaultLiquidationThreshold(uint64 _defaultLiquidationThreshold) external;\n\n /// @notice Set price provider repository\n /// @dev Callable only by owner\n /// @param _repository price provider repository address\n function setPriceProvidersRepository(IPriceProvidersRepository _repository) external;\n\n /// @notice Set router contract\n /// @dev Callable only by owner\n /// @param _router router address\n function setRouter(address _router) external;\n\n /// @notice Set NotificationReceiver contract\n /// @dev Callable only by owner\n /// @param _silo silo address for which to set `_notificationReceiver`\n /// @param _notificationReceiver NotificationReceiver address\n function setNotificationReceiver(address _silo, INotificationReceiver _notificationReceiver) external;\n\n /// @notice Adds new bridge asset\n /// @dev New bridge asset must be unique. Duplicates in bridge assets are not allowed. It's possible to add\n /// bridge asset that has been removed in the past. Note that all Silos must be synced manually. Callable\n /// only by owner.\n /// @param _newBridgeAsset bridge asset address\n function addBridgeAsset(address _newBridgeAsset) external;\n\n /// @notice Removes bridge asset\n /// @dev Note that all Silos must be synced manually. Callable only by owner.\n /// @param _bridgeAssetToRemove bridge asset address to be removed\n function removeBridgeAsset(address _bridgeAssetToRemove) external;\n\n /// @notice Registers new Silo version\n /// @dev User can choose which Silo version he wants to deploy. It's possible to have multiple versions of Silo.\n /// Callable only by owner.\n /// @param _factory factory contract that deploys new version of Silo\n /// @param _isDefault true if this version should be used as default\n function registerSiloVersion(ISiloFactory _factory, bool _isDefault) external;\n\n /// @notice Unregisters Silo version\n /// @dev Callable only by owner.\n /// @param _siloVersion Silo version to be unregistered\n function unregisterSiloVersion(uint128 _siloVersion) external;\n\n /// @notice Sets default Silo version\n /// @dev Callable only by owner.\n /// @param _defaultVersion Silo version to be set as default\n function setDefaultSiloVersion(uint128 _defaultVersion) external;\n\n /// @notice Check if contract address is a Silo deployment\n /// @param _silo address of expected Silo\n /// @return true if address is Silo deployment, otherwise false\n function isSilo(address _silo) external view returns (bool);\n\n /// @notice Get Silo address of asset\n /// @param _asset address of asset\n /// @return address of corresponding Silo deployment\n function getSilo(address _asset) external view returns (address);\n\n /// @notice Get Silo Factory for given version\n /// @param _siloVersion version of Silo implementation\n /// @return ISiloFactory contract that deploys Silos of given version\n function siloFactory(uint256 _siloVersion) external view returns (ISiloFactory);\n\n /// @notice Get debt and collateral Token Factory\n /// @return ITokensFactory contract that deploys debt and collateral tokens\n function tokensFactory() external view returns (ITokensFactory);\n\n /// @notice Get Router contract\n /// @return address of router contract\n function router() external view returns (address);\n\n /// @notice Get current bridge assets\n /// @dev Keep in mind that not all Silos may be synced with current bridge assets so it's possible that some\n /// assets in that list are not part of given Silo.\n /// @return address array of bridge assets\n function getBridgeAssets() external view returns (address[] memory);\n\n /// @notice Get removed bridge assets\n /// @dev Keep in mind that not all Silos may be synced with bridge assets so it's possible that some\n /// assets in that list are still part of given Silo.\n /// @return address array of bridge assets\n function getRemovedBridgeAssets() external view returns (address[] memory);\n\n /// @notice Get maximum LTV for asset in given Silo\n /// @dev If dedicated config is not set, method returns default config\n /// @param _silo address of Silo\n /// @param _asset address of an asset\n /// @return maximum LTV in precision points (Solvency._PRECISION_DECIMALS)\n function getMaximumLTV(address _silo, address _asset) external view returns (uint256);\n\n /// @notice Get Interest Rate Model address for asset in given Silo\n /// @dev If dedicated config is not set, method returns default config\n /// @param _silo address of Silo\n /// @param _asset address of an asset\n /// @return address of interest rate model\n function getInterestRateModel(address _silo, address _asset) external view returns (IInterestRateModel);\n\n /// @notice Get liquidation threshold for asset in given Silo\n /// @dev If dedicated config is not set, method returns default config\n /// @param _silo address of Silo\n /// @param _asset address of an asset\n /// @return liquidation threshold in precision points (Solvency._PRECISION_DECIMALS)\n function getLiquidationThreshold(address _silo, address _asset) external view returns (uint256);\n\n /// @notice Get incentive contract address. Incentive contracts are responsible for distributing rewards\n /// to debt and/or collateral token holders of given Silo\n /// @param _silo address of Silo\n /// @return incentive contract address\n function getNotificationReceiver(address _silo) external view returns (INotificationReceiver);\n\n /// @notice Get owner role address of Repository\n /// @return owner role address\n function owner() external view returns (address);\n\n /// @notice get PriceProvidersRepository contract that manages price providers implementations\n /// @return IPriceProvidersRepository address\n function priceProvidersRepository() external view returns (IPriceProvidersRepository);\n\n /// @dev Get protocol fee for opening a borrow position\n /// @return fee in precision points (Solvency._PRECISION_DECIMALS == 100%)\n function entryFee() external view returns (uint256);\n\n /// @dev Get protocol share fee\n /// @return protocol share fee in precision points (Solvency._PRECISION_DECIMALS == 100%)\n function protocolShareFee() external view returns (uint256);\n\n /// @dev Get protocol liquidation fee\n /// @return protocol liquidation fee in precision points (Solvency._PRECISION_DECIMALS == 100%)\n function protocolLiquidationFee() external view returns (uint256);\n\n /// @dev Checks all conditions for new silo creation and throws when not possible to create\n /// @param _asset address of asset for which you want to create silo\n /// @param _assetIsABridge bool TRUE when `_asset` is bridge asset, FALSE when it is not\n function ensureCanCreateSiloFor(address _asset, bool _assetIsABridge) external view;\n\n function siloRepositoryPing() external pure returns (bytes4);\n}\n"
	},
	"contracts/interfaces/INotificationReceiver.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\n/// @title Common interface for Silo Incentive Contract\ninterface INotificationReceiver {\n /// @dev Informs the contract about token transfer\n /// @param _token address of the token that was transferred\n /// @param _from sender\n /// @param _to receiver\n /// @param _amount amount that was transferred\n function onAfterTransfer(address _token, address _from, address _to, uint256 _amount) external;\n\n /// @dev Sanity check function\n /// @return always true\n function notificationReceiverPing() external pure returns (bytes4);\n}\n"
	},
	"contracts/interfaces/ISiloFactory.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\ninterface ISiloFactory {\n /// @notice Emitted when Silo is deployed\n /// @param silo address of deployed Silo\n /// @param asset address of asset for which Silo was deployed\n /// @param version version of silo implementation\n event NewSiloCreated(address indexed silo, address indexed asset, uint128 version);\n\n /// @notice Must be called by repository on constructor\n /// @param _siloRepository the SiloRepository to set\n function initRepository(address _siloRepository) external;\n\n /// @notice Deploys Silo\n /// @param _siloAsset unique asset for which Silo is deployed\n /// @param _version version of silo implementation\n /// @param _data (optional) data that may be needed during silo creation\n /// @return silo deployed Silo address\n function createSilo(address _siloAsset, uint128 _version, bytes memory _data) external returns (address silo);\n\n /// @dev just a helper method to see if address is a factory\n function siloFactoryPing() external pure returns (bytes4);\n}\n"
	},
	"contracts/interfaces/ITokensFactory.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\nimport \"./IShareToken.sol\";\n\ninterface ITokensFactory {\n /// @notice Emitted when collateral token is deployed\n /// @param token address of deployed collateral token\n event NewShareCollateralTokenCreated(address indexed token);\n\n /// @notice Emitted when collateral token is deployed\n /// @param token address of deployed debt token\n event NewShareDebtTokenCreated(address indexed token);\n\n ///@notice Must be called by repository on constructor\n /// @param _siloRepository the SiloRepository to set\n function initRepository(address _siloRepository) external;\n\n /// @notice Deploys collateral token\n /// @param _name name of the token\n /// @param _symbol symbol of the token\n /// @param _asset underlying asset for which token is deployed\n /// @return address of deployed collateral share token\n function createShareCollateralToken(\n string memory _name,\n string memory _symbol,\n address _asset\n ) external returns (IShareToken);\n\n /// @notice Deploys debt token\n /// @param _name name of the token\n /// @param _symbol symbol of the token\n /// @param _asset underlying asset for which token is deployed\n /// @return address of deployed debt share token\n function createShareDebtToken(\n string memory _name,\n string memory _symbol,\n address _asset\n )\n external\n returns (IShareToken);\n\n /// @dev just a helper method to see if address is a factory\n /// @return always true\n function tokensFactoryPing() external pure returns (bytes4);\n}\n"
	},
	"contracts/interfaces/IPriceProvidersRepository.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity >=0.7.6 <0.9.0;\n\nimport \"./IPriceProvider.sol\";\n\ninterface IPriceProvidersRepository {\n /// @notice Emitted when price provider is added\n /// @param newPriceProvider new price provider address\n event NewPriceProvider(IPriceProvider indexed newPriceProvider);\n\n /// @notice Emitted when price provider is removed\n /// @param priceProvider removed price provider address\n event PriceProviderRemoved(IPriceProvider indexed priceProvider);\n\n /// @notice Emitted when asset is assigned to price provider\n /// @param asset assigned asset address\n /// @param priceProvider price provider address\n event PriceProviderForAsset(address indexed asset, IPriceProvider indexed priceProvider);\n\n /// @notice Register new price provider\n /// @param _priceProvider address of price provider\n function addPriceProvider(IPriceProvider _priceProvider) external;\n\n /// @notice Unregister price provider\n /// @param _priceProvider address of price provider to be removed\n function removePriceProvider(IPriceProvider _priceProvider) external;\n\n /// @notice Sets price provider for asset\n /// @dev Request for asset price is forwarded to the price provider assigned to that asset\n /// @param _asset address of an asset for which price provider will be used\n /// @param _priceProvider address of price provider\n function setPriceProviderForAsset(address _asset, IPriceProvider _priceProvider) external;\n\n /// @notice Returns \"Time-Weighted Average Price\" for an asset\n /// @param _asset address of an asset for which to read price\n /// @return price TWAP price of a token with 18 decimals\n function getPrice(address _asset) external view returns (uint256 price);\n\n /// @notice Gets price provider assigned to an asset\n /// @param _asset address of an asset for which to get price provider\n /// @return priceProvider address of price provider\n function priceProviders(address _asset) external view returns (IPriceProvider priceProvider);\n\n /// @notice Gets token address in which prices are quoted\n /// @return quoteToken address\n function quoteToken() external view returns (address);\n\n /// @notice Gets manager role address\n /// @return manager role address\n function manager() external view returns (address);\n\n /// @notice Checks if providers are available for an asset\n /// @param _asset asset address to check\n /// @return returns TRUE if price feed is ready, otherwise false\n function providersReadyForAsset(address _asset) external view returns (bool);\n\n /// @notice Returns true if address is a registered price provider\n /// @param _provider address of price provider to be removed\n /// @return true if address is a registered price provider, otherwise false\n function isPriceProvider(IPriceProvider _provider) external view returns (bool);\n\n /// @notice Gets number of price providers registered\n /// @return number of price providers registered\n function providersCount() external view returns (uint256);\n\n /// @notice Gets an array of price providers\n /// @return array of price providers\n function providerList() external view returns (address[] memory);\n\n /// @notice Sanity check function\n /// @return returns always TRUE\n function priceProvidersRepositoryPing() external pure returns (bytes4);\n}\n"
	},
	"contracts/interfaces/IInterestRateModel.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\ninterface IInterestRateModel {\n /* solhint-disable /\n struct Config {\n // uopt ∈ (0, 1) – optimal utilization;\n int256 uopt;\n // ucrit ∈ (uopt, 1) – threshold of large utilization;\n int256 ucrit;\n // ulow ∈ (0, uopt) – threshold of low utilization\n int256 ulow;\n // ki > 0 – integrator gain\n int256 ki;\n // kcrit > 0 – proportional gain for large utilization\n int256 kcrit;\n // klow ≥ 0 – proportional gain for low utilization\n int256 klow;\n // klin ≥ 0 – coefficient of the lower linear bound\n int256 klin;\n // beta ≥ 0 - a scaling factor\n int256 beta;\n // ri ≥ 0 – initial value of the integrator\n int256 ri;\n // Tcrit ≥ 0 - the time during which the utilization exceeds the critical value\n int256 Tcrit;\n }\n / solhint-enable */\n\n /// @dev Set dedicated config for given asset in a Silo. Config is per asset per Silo so different assets\n /// in different Silo can have different configs.\n /// It will try to call `_silo.accrueInterest(_asset)` before updating config, but it is not guaranteed,\n /// that this call will be successful, if it fail config will be set anyway.\n /// @param _silo Silo address for which config should be set\n /// @param _asset asset address for which config should be set\n function setConfig(address _silo, address _asset, Config calldata _config) external;\n\n /// @dev get compound interest rate and update model storage\n /// @param _asset address of an asset in Silo for which interest rate should be calculated\n /// @param _blockTimestamp current block timestamp\n /// @return rcomp compounded interest rate from last update until now (1e18 == 100%)\n function getCompoundInterestRateAndUpdate(\n address _asset,\n uint256 _blockTimestamp\n ) external returns (uint256 rcomp);\n\n /// @dev Get config for given asset in a Silo. If dedicated config is not set, default one will be returned.\n /// @param _silo Silo address for which config should be set\n /// @param _asset asset address for which config should be set\n /// @return Config struct for asset in Silo\n function getConfig(address _silo, address _asset) external view returns (Config memory);\n\n /// @dev get compound interest rate\n /// @param _silo address of Silo\n /// @param _asset address of an asset in Silo for which interest rate should be calculated\n /// @param _blockTimestamp current block timestamp\n /// @return rcomp compounded interest rate from last update until now (1e18 == 100%)\n function getCompoundInterestRate(\n address _silo,\n address _asset,\n uint256 _blockTimestamp\n ) external view returns (uint256 rcomp);\n\n /// @dev get current annual interest rate\n /// @param _silo address of Silo\n /// @param _asset address of an asset in Silo for which interest rate should be calculated\n /// @param _blockTimestamp current block timestamp\n /// @return rcur current annual interest rate (1e18 == 100%)\n function getCurrentInterestRate(\n address _silo,\n address _asset,\n uint256 _blockTimestamp\n ) external view returns (uint256 rcur);\n\n /// @notice get the flag to detect rcomp restriction (zero current interest) due to overflow\n /// overflow boolean flag to detect rcomp restriction\n function overflowDetected(\n address _silo,\n address _asset,\n uint256 _blockTimestamp\n ) external view returns (bool overflow);\n\n /// @dev pure function that calculates current annual interest rate\n /// @param _c configuration object, InterestRateModel.Config\n /// @param _totalBorrowAmount current total borrows for asset\n /// @param _totalDeposits current total deposits for asset\n /// @param _interestRateTimestamp timestamp of last interest rate update\n /// @param _blockTimestamp current block timestamp\n /// @return rcur current annual interest rate (1e18 == 100%)\n function calculateCurrentInterestRate(\n Config memory _c,\n uint256 _totalDeposits,\n uint256 _totalBorrowAmount,\n uint256 _interestRateTimestamp,\n uint256 _blockTimestamp\n ) external pure returns (uint256 rcur);\n\n /// @dev pure function that calculates interest rate based on raw input data\n /// @param _c configuration object, InterestRateModel.Config\n /// @param _totalBorrowAmount current total borrows for asset\n /// @param _totalDeposits current total deposits for asset\n /// @param _interestRateTimestamp timestamp of last interest rate update\n /// @param _blockTimestamp current block timestamp\n /// @return rcomp compounded interest rate from last update until now (1e18 == 100%)\n /// @return ri current integral part of the rate\n /// @return Tcrit time during which the utilization exceeds the critical value\n /// @return overflow boolean flag to detect rcomp restriction\n function calculateCompoundInterestRateWithOverflowDetection(\n Config memory _c,\n uint256 _totalDeposits,\n uint256 _totalBorrowAmount,\n uint256 _interestRateTimestamp,\n uint256 _blockTimestamp\n ) external pure returns (\n uint256 rcomp,\n int256 ri,\n int256 Tcrit, // solhint-disable-line var-name-mixedcase\n bool overflow\n );\n\n /// @dev pure function that calculates interest rate based on raw input data\n /// @param _c configuration object, InterestRateModel.Config\n /// @param _totalBorrowAmount current total borrows for asset\n /// @param _totalDeposits current total deposits for asset\n /// @param _interestRateTimestamp timestamp of last interest rate update\n /// @param _blockTimestamp current block timestamp\n /// @return rcomp compounded interest rate from last update until now (1e18 == 100%)\n /// @return ri current integral part of the rate\n /// @return Tcrit time during which the utilization exceeds the critical value\n function calculateCompoundInterestRate(\n Config memory _c,\n uint256 _totalDeposits,\n uint256 _totalBorrowAmount,\n uint256 _interestRateTimestamp,\n uint256 _blockTimestamp\n ) external pure returns (\n uint256 rcomp,\n int256 ri,\n int256 Tcrit // solhint-disable-line var-name-mixedcase\n );\n\n /// @dev returns decimal points used by model\n function DP() external pure returns (uint256); // solhint-disable-line func-name-mixedcase\n\n /// @dev just a helper method to see if address is a InterestRateModel\n /// @return always true\n function interestRateModelPing() external pure returns (bytes4);\n}\n"
	},
	"contracts/interfaces/IPriceProvider.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity >=0.7.6 <0.9.0;\n\n/// @title Common interface for Silo Price Providers\ninterface IPriceProvider {\n /// @notice Returns \"Time-Weighted Average Price\" for an asset. Calculates TWAP price for quote/asset.\n /// It unifies all tokens decimal to 18, examples:\n /// - if asses == quote it returns 1e18\n /// - if asset is USDC and quote is ETH and ETH costs ~$3300 then it returns ~0.0003e18 WETH per 1 USDC\n /// @param _asset address of an asset for which to read price\n /// @return price of asses with 18 decimals, throws when pool is not ready yet to provide price\n function getPrice(address _asset) external view returns (uint256 price);\n\n /// @dev Informs if PriceProvider is setup for asset. It does not means PriceProvider can provide price right away.\n /// Some providers implementations need time to \"build\" buffer for TWAP price,\n /// so price may not be available yet but this method will return true.\n /// @param _asset asset in question\n /// @return TRUE if asset has been setup, otherwise false\n function assetSupported(address _asset) external view returns (bool);\n\n /// @notice Gets token address in which prices are quoted\n /// @return quoteToken address\n function quoteToken() external view returns (address);\n\n /// @notice Helper method that allows easily detects, if contract is PriceProvider\n /// @dev this can save us from simple human errors, in case we use invalid address\n /// but this should NOT be treated as security check\n /// @return always true\n function priceProviderPing() external pure returns (bytes4);\n}\n"
	},
	"@openzeppelin/contracts/security/ReentrancyGuard.sol": {
	"content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)\n\npragma solidity ^0.8.0;\n\n/*\n @dev Contract module that helps prevent reentrant calls to a function.\n \n Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n \n Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n \n TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n /\nabstract contract ReentrancyGuard {\n // Booleans are more expensive than uint256 or any type that takes up a full\n // word because each write operation emits an extra SLOAD to first read the\n // slot's contents, replace the bits taken up by the boolean, and then write\n // back. This is the compiler's defense against contract upgrades and\n // pointer aliasing, and it cannot be disabled.\n\n // The values being non-zero value makes deployment a bit more expensive,\n // but in exchange the refund on every call to nonReentrant will be lower in\n // amount. Since refunds are capped to a percentage of the total\n // transaction's gas, it is best to keep them low in cases like this one, to\n // increase the likelihood of the full refund coming into effect.\n uint256 private constant _NOT_ENTERED = 1;\n uint256 private constant _ENTERED = 2;\n\n uint256 private _status;\n\n constructor() {\n _status = _NOT_ENTERED;\n }\n\n /\n @dev Prevents a contract from calling itself, directly or indirectly.\n * Calling a `nonReentrant` function from another `nonReentrant`\n * function is not supported. It is possible to prevent this from happening\n * by making the `nonReentrant` function external, and making it call a\n * `private` function that does the actual work.\n */\n modifier nonReentrant() {\n // On the first call to nonReentrant, _notEntered will be true\n require(_status != _ENTERED, \"ReentrancyGuard: reentrant call\");\n\n // Any calls to nonReentrant after this point will fail\n _status = _ENTERED;\n\n _;\n\n // By storing the original value once again, a refund is triggered (see\n // https://eips.ethereum.org/EIPS/eip-2200)\n _status = _NOT_ENTERED;\n }\n}\n"
	},
	"contracts/utils/LiquidationReentrancyGuard.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\n/// @dev This is cloned solution of @openzeppelin/contracts/security/ReentrancyGuard.sol\nabstract contract LiquidationReentrancyGuard {\n error LiquidationReentrancyCall();\n\n uint256 private constant _LIQUIDATION_NOT_ENTERED = 1;\n uint256 private constant _LIQUIDATION_ENTERED = 2;\n\n uint256 private _liquidationStatus;\n\n modifier liquidationNonReentrant() {\n if (_liquidationStatus == _LIQUIDATION_ENTERED) {\n revert LiquidationReentrancyCall();\n }\n\n _liquidationStatus = _LIQUIDATION_ENTERED;\n\n _;\n\n _liquidationStatus = _LIQUIDATION_NOT_ENTERED;\n }\n\n constructor() {\n _liquidationStatus = _LIQUIDATION_NOT_ENTERED;\n }\n}\n"
	},
	"contracts/interfaces/IGuardedLaunch.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\ninterface IGuardedLaunch {\n /// @dev Stores info about maximum allowed liquidity in a Silo. This limit applies to deposit only.\n struct MaxLiquidityLimit {\n /// @dev flag to turn on/off all limits for all Silos\n bool globalLimit;\n /// @dev default value represents maximum allowed liquidity in Silo\n uint256 defaultMaxLiquidity;\n /// @notice siloMaxLiquidity maps silo => asset => maximum allowed deposit liquidity.\n /// @dev Deposit liquidity limit is denominated in quote token. For example, if set to 1e18, it means that any\n /// given Silo is allowed for deposits up to 1 quote token of value. Value is calculated using prices from the\n /// Oracle.\n mapping(address => mapping(address => uint256)) siloMaxLiquidity;\n }\n\n /// @dev Stores info about paused Silos\n /// if `globalPause` == `true`, all Silo are paused\n /// if `globalPause` == `false` and `siloPause[silo][0x0]` == `true`, all assets in a `silo` are paused\n /// if `globalPause` == `false` and `siloPause[silo][asset]` == `true`, only `asset` in a `silo` is paused\n struct Paused {\n bool globalPause;\n /// @dev maps silo address to asset address to bool\n mapping(address => mapping(address => bool)) siloPause;\n }\n\n /// @notice Emitted when all Silos are paused or unpaused\n /// @param globalPause current value of `globalPause`\n event GlobalPause(bool globalPause);\n\n /// @notice Emitted when a single Silo or single asset in a Silo is paused or unpaused\n /// @param silo address of Silo which is paused\n /// @param asset address of an asset which is paused\n /// @param pauseValue true when paused, otherwise false\n event SiloPause(address silo, address asset, bool pauseValue);\n\n /// @notice Emitted when max liquidity toggle is switched\n /// @param newLimitedMaxLiquidityState new value for max liquidity toggle\n event LimitedMaxLiquidityToggled(bool newLimitedMaxLiquidityState);\n\n /// @notice Emitted when deposit liquidity limit is changed for Silo and asset\n /// @param silo Silo address for which to set limit\n /// @param asset Silo asset for which to set limit\n /// @param newMaxDeposits deposit limit amount in quote token\n event SiloMaxDepositsLimitsUpdate(address indexed silo, address indexed asset, uint256 newMaxDeposits);\n\n /// @notice Emitted when default max liquidity limit is changed\n /// @param newMaxDeposits new deposit limit in quote token\n event DefaultSiloMaxDepositsLimitUpdate(uint256 newMaxDeposits);\n\n /// @notice Sets limited liquidity to provided value\n function setLimitedMaxLiquidity(bool _globalLimit) external;\n\n /// @notice Sets default deposit limit for all Silos\n /// @param _maxDeposits deposit limit amount in quote token\n function setDefaultSiloMaxDepositsLimit(uint256 _maxDeposits) external;\n\n /// @notice Sets deposit limit for Silo\n /// @param _silo Silo address for which to set limit\n /// @param _asset Silo asset for which to set limit\n /// @param _maxDeposits deposit limit amount in quote token\n function setSiloMaxDepositsLimit(\n address _silo,\n address _asset,\n uint256 _maxDeposits\n ) external;\n\n /// @notice Pause all Silos\n /// @dev Callable only by owner.\n /// @param _globalPause true to pause all Silos, otherwise false\n function setGlobalPause(bool _globalPause) external;\n\n /// @notice Pause single asset in a single Silo\n /// @dev Callable only by owner.\n /// @param _silo address of Silo in which `_asset` is being paused\n /// @param _asset address of an asset that is being paused\n /// @param _pauseValue true to pause, false to unpause\n function setSiloPause(address _silo, address _asset, bool _pauseValue) external;\n\n /// @notice Check given asset in a Silo is paused\n /// @param _silo address of Silo\n /// @param _asset address of an asset\n /// @return true if given asset in a Silo is paused, otherwise false\n function isSiloPaused(address _silo, address _asset) external view returns (bool);\n\n /// @notice Gets deposit limit for Silo\n /// @param _silo Silo address for which to set limit\n /// @param _asset Silo asset for which to set limit\n /// @return deposit limit for Silo\n function getMaxSiloDepositsValue(address _silo, address _asset) external view returns (uint256);\n}\n"
	},
	"contracts/lib/Ping.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity >=0.7.6 <0.9.0;\n\n\nlibrary Ping {\n function pong(function() external pure returns(bytes4) pingFunction) internal pure returns (bool) {\n return pingFunction.address != address(0) && pingFunction.selector == pingFunction();\n }\n}\n"
	},
	"contracts/lib/TokenHelper.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\nimport \"@openzeppelin/contracts/utils/Address.sol\";\nimport \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol\";\n\n\nlibrary TokenHelper {\n uint256 private constant _BYTES32_SIZE = 32;\n\n error TokenIsNotAContract();\n\n function assertAndGetDecimals(address _token) internal view returns (uint256) {\n (bool hasMetadata, bytes memory data) = _tokenMetadataCall(_token, abi.encodeCall(IERC20Metadata.decimals,()));\n\n // decimals() is optional in the ERC20 standard, so if metadata is not accessible\n // we assume there are no decimals and use 0.\n if (!hasMetadata) {\n return 0;\n }\n\n return abi.decode(data, (uint8));\n }\n\n /// @dev Returns the symbol for the provided ERC20 token.\n /// An empty string is returned if the call to the token didn't succeed.\n /// @param _token address of the token to get the symbol for\n /// @return assetSymbol the token symbol\n function symbol(address _token) internal view returns (string memory assetSymbol) {\n (bool hasMetadata, bytes memory data) = _tokenMetadataCall(_token, abi.encodeCall(IERC20Metadata.symbol,()));\n\n if (!hasMetadata \|\| data.length == 0) {\n return \"?\";\n } else if (data.length == _BYTES32_SIZE) {\n return string(removeZeros(data));\n } else {\n return abi.decode(data, (string));\n }\n }\n\n /// @dev Removes bytes with value equal to 0 from the provided byte array.\n /// @param _data byte array from which to remove zeroes\n /// @return result byte array with zeroes removed \n function removeZeros(bytes memory _data) internal pure returns (bytes memory result) {\n uint256 n = _data.length;\n\n unchecked {\n for (uint256 i; i < n; i++) {\n if (_data[i] == 0) continue;\n\n result = abi.encodePacked(result, _data[i]);\n }\n }\n }\n\n /// @dev Performs a staticcall to the token to get its metadata (symbol, decimals, name)\n function _tokenMetadataCall(address _token, bytes memory _data) private view returns(bool, bytes memory) {\n // We need to do this before the call, otherwise the call will succeed even for EOAs\n if (!Address.isContract(_token)) revert TokenIsNotAContract();\n\n (bool success, bytes memory result) = _token.staticcall(_data);\n\n // If the call reverted we assume the token doesn't follow the metadata extension\n if (!success) {\n return (false, \"\");\n }\n\n return (true, result);\n }\n}\n"
	},
	"contracts/lib/Solvency.sol": {
	"content": "// SPDX-License-Identifier: BUSL-1.1\npragma solidity 0.8.13;\n\nimport \"@openzeppelin/contracts/token/ERC20/ERC20.sol\";\n\nimport \"../interfaces/IPriceProvidersRepository.sol\";\nimport \"../interfaces/ISilo.sol\";\nimport \"../interfaces/IInterestRateModel.sol\";\nimport \"../interfaces/ISiloRepository.sol\";\nimport \"./EasyMath.sol\";\n\nlibrary Solvency {\n using EasyMath for uint256;\n\n /// @notice\n /// MaximumLTV - Maximum Loan-to-Value ratio represents the maximum borrowing power of all user's collateral\n /// positions in a Silo\n /// LiquidationThreshold - Liquidation Threshold represents the threshold at which all user's borrow positions\n /// in a Silo will be considered under collateralized and subject to liquidation\n enum TypeofLTV { MaximumLTV, LiquidationThreshold }\n\n error DifferentArrayLength();\n error UnsupportedLTVType();\n\n struct SolvencyParams {\n /// @param siloRepository SiloRepository address\n ISiloRepository siloRepository;\n /// @param silo Silo address\n ISilo silo;\n /// @param assets array with assets\n address[] assets;\n /// @param assetStates array of states for each asset, where index match the `assets` index\n ISilo.AssetStorage[] assetStates;\n /// @param user wallet address for which to read debt\n address user;\n }\n\n /// @dev is value that used for integer calculations and decimal points for utilization ratios, LTV, protocol fees\n uint256 internal constant _PRECISION_DECIMALS = 1e18;\n uint256 internal constant _INFINITY = type(uint256).max;\n\n /// @notice Returns current user LTV and second LTV chosen in params\n /// @dev This function is optimized for protocol use. In some cases there is no need to keep the calculation\n /// going and predefined results can be returned.\n /// @param _params `Solvency.SolvencyParams` struct with needed params for calculation\n /// @param _secondLtvType type of LTV to be returned as second value\n /// @return currentUserLTV Loan-to-Value ratio represents current user's proportion of debt to collateral\n /// @return secondLTV second type of LTV which depends on _secondLtvType, zero is returned if the value of the loan\n /// or the collateral are zero\n function calculateLTVs(SolvencyParams memory _params, TypeofLTV _secondLtvType)\n internal\n view\n returns (uint256 currentUserLTV, uint256 secondLTV)\n {\n uint256[] memory totalBorrowAmounts = getBorrowAmounts(_params);\n\n // this return avoids eg. additional checks on withdraw, when user did not borrow any asset\n if (EasyMath.sum(totalBorrowAmounts) == 0) return (0, 0);\n\n IPriceProvidersRepository priceProvidersRepository = _params.siloRepository.priceProvidersRepository();\n\n uint256[] memory borrowValues = convertAmountsToValues(\n priceProvidersRepository,\n _params.assets,\n totalBorrowAmounts\n );\n\n // value of user's total debt\n uint256 borrowTotalValue = EasyMath.sum(borrowValues);\n\n if (borrowTotalValue == 0) return (0, 0);\n\n uint256[] memory collateralValues = getUserCollateralValues(priceProvidersRepository, _params);\n\n // value of user's collateral\n uint256 collateralTotalValue = EasyMath.sum(collateralValues);\n\n if (collateralTotalValue == 0) return (_INFINITY, 0);\n\n // value of theoretical debt user can have depending on TypeofLTV\n uint256 borrowAvailableTotalValue = _getTotalAvailableToBorrowValue(\n _params.siloRepository,\n address(_params.silo),\n _params.assets,\n _secondLtvType,\n collateralValues\n );\n\n currentUserLTV = borrowTotalValue * _PRECISION_DECIMALS / collateralTotalValue;\n\n // one of Solvency.TypeofLTV\n secondLTV = borrowAvailableTotalValue * _PRECISION_DECIMALS / collateralTotalValue;\n }\n\n /// @notice Calculates chosen LTV limit\n /// @dev This function should be used by external actors like SiloLens and UI/subgraph. `calculateLTVs` is\n /// optimized for protocol use and may not return second LVT calculation when they are not needed.\n /// @param _params `Solvency.SolvencyParams` struct with needed params for calculation\n /// @param _ltvType acceptable values are only TypeofLTV.MaximumLTV or TypeofLTV.LiquidationThreshold\n /// @return limit theoretical LTV limit of `_ltvType`\n function calculateLTVLimit(SolvencyParams memory _params, TypeofLTV _ltvType)\n internal\n view\n returns (uint256 limit)\n {\n IPriceProvidersRepository priceProvidersRepository = _params.siloRepository.priceProvidersRepository();\n\n uint256[] memory collateralValues = getUserCollateralValues(priceProvidersRepository, _params);\n\n // value of user's collateral\n uint256 collateralTotalValue = EasyMath.sum(collateralValues);\n\n if (collateralTotalValue == 0) return 0;\n\n // value of theoretical debt user can have depending on TypeofLTV\n uint256 borrowAvailableTotalValue = _getTotalAvailableToBorrowValue(\n _params.siloRepository,\n address(_params.silo),\n _params.assets,\n _ltvType,\n collateralValues\n );\n\n limit = borrowAvailableTotalValue * _PRECISION_DECIMALS / collateralTotalValue;\n }\n\n /// @notice Returns worth (in quote token) of each collateral deposit of a user\n /// @param _priceProvidersRepository address of IPriceProvidersRepository where prices are read\n /// @param _params `Solvency.SolvencyParams` struct with needed params for calculation\n /// @return collateralValues worth of each collateral deposit of a user as an array\n function getUserCollateralValues(IPriceProvidersRepository _priceProvidersRepository, SolvencyParams memory _params)\n internal\n view\n returns(uint256[] memory collateralValues)\n {\n uint256[] memory collateralAmounts = getCollateralAmounts(_params);\n collateralValues = convertAmountsToValues(_priceProvidersRepository, _params.assets, collateralAmounts);\n }\n\n /// @notice Convert assets amounts to values in quote token (amount * price)\n /// @param _priceProviderRepo address of IPriceProvidersRepository where prices are read\n /// @param _assets array with assets for which prices are read\n /// @param _amounts array of amounts\n /// @return values array of values for corresponding assets\n function convertAmountsToValues(\n IPriceProvidersRepository _priceProviderRepo,\n address[] memory _assets,\n uint256[] memory _amounts\n ) internal view returns (uint256[] memory values) {\n if (_assets.length != _amounts.length) revert DifferentArrayLength();\n\n values = new uint256[](_assets.length);\n\n for (uint256 i = 0; i < _assets.length; i++) {\n if (_amounts[i] == 0) continue;\n\n uint256 assetPrice = _priceProviderRepo.getPrice(_assets[i]);\n uint8 assetDecimals = ERC20(_assets[i]).decimals();\n\n values[i] = _amounts[i].toValue(assetPrice, assetDecimals);\n }\n }\n\n /// @notice Get amount of collateral for each asset\n /// @param _params `Solvency.SolvencyParams` struct with needed params for calculation\n /// @return collateralAmounts array of amounts for each token in Silo. May contain zero values if user\n /// did not deposit given collateral token.\n function getCollateralAmounts(SolvencyParams memory _params)\n internal\n view\n returns (uint256[] memory collateralAmounts)\n {\n if (_params.assets.length != _params.assetStates.length) {\n revert DifferentArrayLength();\n }\n\n collateralAmounts = new uint256[](_params.assets.length);\n\n for (uint256 i = 0; i < _params.assets.length; i++) {\n uint256 userCollateralTokenBalance = _params.assetStates[i].collateralToken.balanceOf(_params.user);\n uint256 userCollateralOnlyTokenBalance = _params.assetStates[i].collateralOnlyToken.balanceOf(_params.user);\n\n if (userCollateralTokenBalance + userCollateralOnlyTokenBalance == 0) continue;\n\n uint256 rcomp = getRcomp(_params.silo, _params.siloRepository, _params.assets[i], block.timestamp);\n\n collateralAmounts[i] = getUserCollateralAmount(\n _params.assetStates[i],\n userCollateralTokenBalance,\n userCollateralOnlyTokenBalance,\n rcomp,\n _params.siloRepository\n );\n }\n }\n\n /// @notice Get amount of debt for each asset\n /// @param _params `Solvency.SolvencyParams` struct with needed params for calculation\n /// @return totalBorrowAmounts array of amounts for each token in Silo. May contain zero values if user\n /// did not borrow given token.\n function getBorrowAmounts(SolvencyParams memory _params)\n internal\n view\n returns (uint256[] memory totalBorrowAmounts)\n {\n if (_params.assets.length != _params.assetStates.length) {\n revert DifferentArrayLength();\n }\n\n totalBorrowAmounts = new uint256[](_params.assets.length);\n\n for (uint256 i = 0; i < _params.assets.length; i++) {\n uint256 rcomp = getRcomp(_params.silo, _params.siloRepository, _params.assets[i], block.timestamp);\n totalBorrowAmounts[i] = getUserBorrowAmount(_params.assetStates[i], _params.user, rcomp);\n }\n }\n\n /// @notice Get amount of deposited token, including collateralOnly deposits\n /// @param _assetStates state of deposited asset in Silo\n /// @param _userCollateralTokenBalance balance of user's share collateral token\n /// @param _userCollateralOnlyTokenBalance balance of user's share collateralOnly token\n /// @param _rcomp compounded interest rate to account for during calculations, could be 0\n /// @param _siloRepository SiloRepository address\n /// @return amount of underlying token deposited, including collateralOnly deposit\n function getUserCollateralAmount(\n ISilo.AssetStorage memory _assetStates,\n uint256 _userCollateralTokenBalance,\n uint256 _userCollateralOnlyTokenBalance,\n uint256 _rcomp,\n ISiloRepository _siloRepository\n ) internal view returns (uint256) {\n uint256 assetAmount = _userCollateralTokenBalance == 0 ? 0 : _userCollateralTokenBalance.toAmount(\n totalDepositsWithInterest(_assetStates.totalDeposits, _siloRepository.protocolShareFee(), _rcomp),\n _assetStates.collateralToken.totalSupply()\n );\n\n uint256 assetCollateralOnlyAmount = _userCollateralOnlyTokenBalance == 0\n ? 0\n : _userCollateralOnlyTokenBalance.toAmount(\n _assetStates.collateralOnlyDeposits,\n _assetStates.collateralOnlyToken.totalSupply()\n );\n\n return assetAmount + assetCollateralOnlyAmount;\n }\n\n /// @notice Get amount of borrowed token\n /// @param _assetStates state of borrowed asset in Silo\n /// @param _user user wallet address for which to read debt\n /// @param _rcomp compounded interest rate to account for during calculations, could be 0\n /// @return amount of borrowed token\n function getUserBorrowAmount(ISilo.AssetStorage memory _assetStates, address _user, uint256 _rcomp)\n internal\n view\n returns (uint256)\n {\n uint256 balance = _assetStates.debtToken.balanceOf(_user);\n if (balance == 0) return 0;\n\n uint256 totalBorrowAmountCached = totalBorrowAmountWithInterest(_assetStates.totalBorrowAmount, _rcomp);\n return balance.toAmountRoundUp(totalBorrowAmountCached, _assetStates.debtToken.totalSupply());\n }\n\n /// @notice Get compounded interest rate from the model\n /// @param _silo Silo address\n /// @param _siloRepository SiloRepository address\n /// @param _asset address of asset for which to read interest rate\n /// @param _timestamp used to determine amount of time from last rate update\n /// @return rcomp compounded interest rate for an asset\n function getRcomp(ISilo _silo, ISiloRepository _siloRepository, address _asset, uint256 _timestamp)\n internal\n view\n returns (uint256 rcomp)\n {\n IInterestRateModel model = _siloRepository.getInterestRateModel(address(_silo), _asset);\n rcomp = model.getCompoundInterestRate(address(_silo), _asset, _timestamp);\n }\n\n /// @notice Returns total deposits with interest dynamically calculated with the provided rComp\n /// @param _assetTotalDeposits total deposits for asset\n /// @param _protocolShareFee `siloRepository.protocolShareFee()`\n /// @param _rcomp compounded interest rate\n /// @return _totalDepositsWithInterests total deposits amount with interest\n function totalDepositsWithInterest(uint256 _assetTotalDeposits, uint256 _protocolShareFee, uint256 _rcomp)\n internal\n pure\n returns (uint256 _totalDepositsWithInterests)\n {\n uint256 depositorsShare = _PRECISION_DECIMALS - _protocolShareFee;\n\n return _assetTotalDeposits + _assetTotalDeposits * _rcomp / _PRECISION_DECIMALS * depositorsShare /\n _PRECISION_DECIMALS;\n }\n\n /// @notice Returns total borrow amount with interest dynamically calculated with the provided rComp\n /// @param _totalBorrowAmount total borrow amount\n /// @param _rcomp compounded interest rate\n /// @return totalBorrowAmountWithInterests total borrow amount with interest\n function totalBorrowAmountWithInterest(uint256 _totalBorrowAmount, uint256 _rcomp)\n internal\n pure\n returns (uint256 totalBorrowAmountWithInterests)\n {\n totalBorrowAmountWithInterests = _totalBorrowAmount + _totalBorrowAmount * _rcomp / _PRECISION_DECIMALS;\n }\n\n /// @notice Calculates protocol liquidation fee and new protocol total fees collected\n /// @param _protocolEarnedFees amount of total collected fees so far\n /// @param _amount amount on which we will apply fee\n /// @param _liquidationFee liquidation fee in Solvency._PRECISION_DECIMALS\n /// @return liquidationFeeAmount calculated interest\n /// @return newProtocolEarnedFees the new total amount of protocol fees\n function calculateLiquidationFee(uint256 _protocolEarnedFees, uint256 _amount, uint256 _liquidationFee)\n internal\n pure\n returns (uint256 liquidationFeeAmount, uint256 newProtocolEarnedFees)\n {\n unchecked {\n // If we overflow on multiplication it should not revert tx, we will get lower fees\n liquidationFeeAmount = _amount * _liquidationFee / Solvency._PRECISION_DECIMALS;\n\n if (_protocolEarnedFees > type(uint256).max - liquidationFeeAmount) {\n newProtocolEarnedFees = type(uint256).max;\n liquidationFeeAmount = type(uint256).max - _protocolEarnedFees;\n } else {\n newProtocolEarnedFees = _protocolEarnedFees + liquidationFeeAmount;\n }\n }\n }\n\n /// @notice Calculates theoretical value (in quote token) that user could borrow based given collateral value\n /// @param _siloRepository SiloRepository address\n /// @param _silo Silo address\n /// @param _asset address of collateral token\n /// @param _type type of LTV limit to use for calculations\n /// @param _collateralValue value of collateral deposit (in quote token)\n /// @return availableToBorrow value (in quote token) that user can borrow against collateral value\n function _getAvailableToBorrowValue(\n ISiloRepository _siloRepository,\n address _silo,\n address _asset,\n TypeofLTV _type,\n uint256 _collateralValue\n ) private view returns (uint256 availableToBorrow) {\n uint256 assetLTV;\n\n if (_type == TypeofLTV.MaximumLTV) {\n assetLTV = _siloRepository.getMaximumLTV(_silo, _asset);\n } else if (_type == TypeofLTV.LiquidationThreshold) {\n assetLTV = _siloRepository.getLiquidationThreshold(_silo, _asset);\n } else {\n revert UnsupportedLTVType();\n }\n\n // value that can be borrowed against the deposit\n // ie. for assetLTV = 50%, 1 ETH * 50% = 0.5 ETH of available to borrow\n availableToBorrow = _collateralValue * assetLTV / _PRECISION_DECIMALS;\n }\n\n /// @notice Calculates theoretical value (in quote token) that user can borrow based on deposited collateral\n /// @param _siloRepository SiloRepository address\n /// @param _silo Silo address\n /// @param _assets array with assets\n /// @param _ltvType type of LTV limit to use for calculations\n /// acceptable values are only TypeofLTV.MaximumLTV or TypeofLTV.LiquidationThreshold\n /// @param _collateralValues value (worth in quote token) of each deposit made by user\n /// @return totalAvailableToBorrowValue value (in quote token) that user can borrow against collaterals\n function _getTotalAvailableToBorrowValue(\n ISiloRepository _siloRepository,\n address _silo,\n address[] memory _assets,\n TypeofLTV _ltvType,\n uint256[] memory _collateralValues\n ) private view returns (uint256 totalAvailableToBorrowValue) {\n if (_assets.length != _collateralValues.length) revert DifferentArrayLength();\n\n for (uint256 i = 0; i < _assets.length; i++) {\n totalAvailableToBorrowValue += _getAvailableToBorrowValue(\n _siloRepository,\n _silo,\n _assets[i],\n _ltvType,\n _collateralValues[i]\n );\n }\n }\n}\n"
	}
	},
	"settings": {
	"optimizer": {
	"enabled": true,
	"runs": 200
	},
	"outputSelection": {
	"*": {
	"*": [
	"evm.bytecode",
	"evm.deployedBytecode",
	"devdoc",
	"userdoc",
	"metadata",
	"abi"
	]
	}
	},
	"metadata": {
	"useLiteralContent": true
	},
	"libraries": {}
	}
	}