Spaces:
Sleeping
Sleeping
| Ticket Name: DRA75P: Need direct connect CSI2 Camera Module for J6 EVM, J6+ EVEM | |
| Query Text: | |
| Part Number: DRA75P Other Parts Discussed in Thread: TDA2, TVP5158 Is there an off-the-shelf CSI2 output camera module available for the J6/J6+/TDA2/TDA2+ EVM that mates directly to the CSI2 connector (J8 on J6+ EVM, J5 on J6 EVM)? That is, need a direct CSI2 connection without SERDES for development purposes. | |
| Responses: | |
| Hi David, J6 does not support CSI interface, but you could connect LI based camera to LI input interface on TDA2x+ EVM. Rgds, Brijesh | |
| Oh, right, I forgot that J6 did not have CSI2 and those ports I mentioned are for leopard imaging parallel output sensors. TDA2x+ and J6+ EVMs do have CSI2 expansion connectors (P15/J15). Do you mean that LI has a CSI2 output camera module that mates directly to the TDA2+ EVM? | |
| Hi David, I dont remember exactly connectors. Is this J15 MIPI connector or LI connector? We can connect OV10640 LI based sensor on LI connector and OV2775 on MIPI connector. Rgds, Brijesh | |
| Brijesh, According to the Processor SDK Linux Automotive Developer Guide we support the following: Supported cameras Camera Adapter Layer is used to capture video from CSI Camera. Currently the CAL driver supports following features. Processor SDK Linux Automotive release supports following sensors/cameras/video inputs:- OV10635 sensor - YUYV sensor on Vision board OV10635 sensor - YUYV sensor connected through LVDS OV10633 sensor - YUYV sensor connected on J6 EVM TVP5158 decoder - Support for decoding single channel analog video OV10640/OV490 - 720p CSI2 raw camera connected to OV490 ISP in YUYV format Processor SDK supports following sensors/cameras | |
| My reply above got truncated... The OV2775 and OV10640 are both RAW output. We want YUV. Do you have experience with the OV10640/OV490 combo? Is it sold as a kit from LI? Do we have a sample configuration which sets up basic YUV output through the ISP or would customer have to figure all that out? Again, we were looking for a reference camera (CSI2, YUV, no SERDES) without needing to use the Vision SDK. Thanks, | |
| Hi David, It is not supported on Vision SDK. It might be supported on Linux Let me check with the Linux team. Rgds, Brijesh | |
| I checked with Leopard Imaging and they apparently do not offer a OV10640+OV490 combination with 36 pin connector to fit our EVM. Is someone on the Linux team familiar with the configuration mentioned in the SW Dev Guide? | |
| The Linux team explained that the OV10640 + OV490 was custom made for TI and not available to customers. | |